JP1 Version 10 JP1/Automatic Operation サービステンプレート開発ガイド
目次
索引
前へ
2 / 197
次へ
表紙
前書き
変更内容
はじめに
1. サービステンプレート開発の流れ
1.1 概要
1.1.1 サービステンプレート開発の流れ
1.1.2 サービステンプレートの開発に使用する要素
1.1.3 サービステンプレートの開発に使用する主な画面
1.2 作業内容とサービステンプレートの構成
1.2.1 サービステンプレートを新規作成する場合の作業内容と構成
1.2.2 サービステンプレートを編集して使用する場合の作業内容と構成
1.2.3 サービステンプレートをそのまま使用する場合の作業内容と構成
1.3 サービステンプレートを新規作成する流れ
1.3.1 サービステンプレートを新規作成する流れ
1.4 サービステンプレートを編集して使用する流れ
1.4.1 サービステンプレートの定義情報を編集する流れ
1.4.2 部品を編集してサービステンプレートに適用する流れ
1.4.3 部品を新規作成してサービステンプレートに適用する流れ
1.4.4 サービスの説明を表示する画面の内容を変更する流れ
1.4.5 サービステンプレートに処理を追加する流れ
1.4.6 サービステンプレート中の処理を削除する流れ
1.4.7 自動処理する際のパラメータを,動的または静的に設定する場合の流れ
1.4.8 サービスリソースファイルを使用してサービスの表示情報を設定する流れ
1.4.9 部品リソースファイルを使用して部品の表示情報を設定する流れ
1.5 JP1/AOが提供するサービステンプレートをそのまま使用する流れ
1.5.1 JP1/AOが提供するサービステンプレートをそのまま使用する流れ
1.6 サービステンプレート開発に関する機能一覧
2. サービステンプレートの定義情報を設定する
2.1 [エディタ]画面を表示する
2.1.1 [エディタ]画面を表示する手順
2.1.2 開発サービステンプレートおよびリリースサービステンプレートとは
2.1.3 サービステンプレートの構成種別と実行できる操作の差異
2.1.4 [エディタ]画面で割り込み操作があった場合の動作
2.1.5 [エディタ]画面で作成したサービステンプレートおよび部品の互換性について
2.1.6 下位バージョンのJP1/AOで作成したサービステンプレートに含まれるステップの互換性について
2.2 サービステンプレートを作成・編集する
2.2.1 空のサービステンプレートを作成する手順
2.2.2 サービステンプレートの作成または複製時に設定する項目について
2.2.3 サービスの定義情報を設定する手順
2.2.4 サービスの定義情報として設定する項目について
2.2.5 マッピングパラメータの定義例とデータの流れについて
2.2.6 画面カスタムファイルを設定する手順
2.2.7 画面カスタムファイルとは
2.2.8 画面カスタムファイルの形式
2.2.9 サービスに定義するプロパティ(サービスプロパティ)
2.2.10 サービス共有プロパティを追加する手順
2.2.11 サービス共有プロパティとは
2.2.12 サービス共有プロパティを定義する場合の注意事項
2.2.13 ビルトインサービス共有プロパティとは
2.2.14 プロパティの可視性とは
2.2.15 編集中に別のサービステンプレートを参照する手順
2.3 サービステンプレートを一覧表示する
2.3.1 サービステンプレートを一覧表示する手順
2.4 サービステンプレートを複製する
2.4.1 サービステンプレートを複製する手順
2.4.2 サービステンプレートおよび部品の一意性について
2.5 サービステンプレートを削除する
2.5.1 開発サービステンプレートを削除する手順
2.5.2 リリースサービステンプレートを削除する手順
2.6 サービステンプレートの表示情報をリソースファイルで設定する
2.6.1 サービスリソースファイルを設定する手順
2.6.2 サービスリソースファイルの形式
2.6.3 サービスリソースファイルの定義内容
2.6.4 サービステンプレートの表示情報とサービスリソースファイルのプロパティとの対応
3. フローを作成・編集する
3.1 [フロー]ビューを表示する
3.1.1 [フロー]ビューを表示する手順
3.1.2 フローとステップの関係
3.1.3 フローの階層化について
3.2 ステップを追加する
3.2.1 ステップを追加する手順
3.2.2 ステップの定義情報を変更する手順
3.2.3 ステップの定義情報として設定する項目について
3.2.4 後続ステップ実行条件について
3.2.5 入力プロパティマッピングの設定手順
3.2.6 出力プロパティマッピングの設定手順
3.2.7 予約プロパティ一覧
3.2.8 ステップに表示される警告アイコンについて
3.3 ステップとして使用している部品のバージョンを管理する
3.3.1 ステップとして使用している部品のバージョンの管理について
3.3.2 ステップとして使用している部品のバージョンを確認する手順
3.3.3 ステップとして使用している部品のバージョンを一括で最新にする手順
3.3.4 ステップとして使用している部品のバージョンを任意に変更する手順
3.4 関連線を接続する
3.4.1 関連線を接続する手順
3.4.2 ステップまたは関連線を削除する手順
3.4.3 ステップまたは関連線をコピーする手順
3.4.4 ステップまたは関連線を切り取る手順
3.4.5 ステップを複数選択する手順
3.4.6 ステップまたは関連線を貼り付ける手順
3.4.7 ステップまたは関連線の貼り付け時に引き継がれる情報
3.4.8 複数のステップに関連線を接続する場合の動作
3.4.9 関連線が接続できない例
3.4.10 処理が分岐する部品を使用する場合の関連線接続
4. 部品を作成・編集する
4.1 部品を一覧表示する
4.1.1 部品を一覧表示する手順
4.1.2 基本部品,リリース部品,開発部品とは
4.1.3 部品の実行ユーザー
4.1.4 部品の種別と実施できる操作
4.1.5 操作対象の機器に転送されるファイル(Windowsの場合)
4.1.6 操作対象の機器に転送されるファイル(UNIXの場合)
4.1.7 部品実行時に設定される操作対象の機器のロケールについて
4.1.8 部品実行時にJP1/AOが通信で使用する文字セットについて
4.1.9 部品実行時に特定の文字セットを設定したい場合
4.1.10 部品実行時に必要なOSのコマンドについて
4.2 部品を作成する
4.2.1 部品を作成する手順
4.2.2 部品の作成または複製時に設定する項目について
4.3 部品を編集する
4.3.1 部品の定義情報を編集する手順
4.3.2 部品の定義情報として設定する項目について
4.3.3 部品のアイコンとして設定できる画像ファイルについて
4.3.4 部品の認証種別とは
4.3.5 部品に定義するプロパティ(部品プロパティ)
4.3.6 実行ホストまたは認証情報を指定するための予約部品プロパティ
4.3.7 標準出力および標準エラー出力を出力プロパティにマッピングする手順
4.3.8 「出力フィルタ」の指定方法について
4.3.9 スクリプトを設定する手順
4.3.10 [コマンドライン]テキストボックスの指定方法について
4.3.11 コンテンツ部品の戻り値について
4.3.12 実行したコマンドまたはスクリプトの戻り値,部品の戻り値,ステップの戻り値の関係について
4.3.13 コマンドまたはスクリプトの戻り値をフローの分岐条件に使用する手順(戻り値が0〜63の範囲外の場合)
4.3.14 部品の標準出力について
4.3.15 スクリプトの設定方法による差異
4.3.16 「実行ディレクトリ」の指定方法について
4.3.17 コマンドを設定する手順
4.4 部品を削除する
4.4.1 部品を削除する手順
4.5 部品を複製する
4.5.1 部品を複製する手順
4.6 部品の表示情報をリソースファイルで設定する
4.6.1 部品リソースファイルを設定する手順
4.6.2 部品リソースファイルの形式
4.6.3 部品の表示情報と部品リソースファイルのプロパティとの対応
5. サービステンプレートを検証する
5.1 サービステンプレートを検証する概要
5.1.1 サービステンプレートを検証する流れ
5.1.2 ビルドとは
5.1.3 デバッグとは
5.1.4 運用テストとは
5.2 サービステンプレートをビルドする
5.2.1 サービステンプレートをビルドする手順
5.3 サービステンプレートをデバッグする
5.3.1 サービステンプレートをデバッグする流れ
5.3.2 デバッグ時に組み合わせて使用する機能一覧
5.3.3 サービステンプレートのデバッグ例
5.3.4 デバッグを開始する手順
5.3.5 デバッグを開始するときの設定項目について
5.3.6 サービステンプレートをビルドしないで再度デバッグする手順
5.3.7 ステップごとに中断しないでデバッグする流れ
5.3.8 ステップごとに中断してデバッグする流れ
5.3.9 ステップごとに中断してデバッグする場合の処理の流れ
5.3.10 デバッグ時にステップ実行を中断できない部品
5.3.11 ステップ実行の中断時に変更できるステップの情報
5.3.12 デバッグ時に部品の処理をスキップする手順
5.3.13 デバッグ時に失敗したステップからリトライする手順
5.3.14 デバッグ時に失敗した次のステップからリトライする手順
5.3.15 応答待ち中のデバッグタスクの対処を入力する手順(応答入力)
5.3.16 デバッグ時にプロパティマッピングの設定を確認する手順
5.3.17 デバッグ時に部品の入力プロパティの値を変更する手順
5.3.18 デバッグ時に部品の出力プロパティの値を変更する手順
5.3.19 デバッグ時に部品の戻り値を変更する手順
5.3.20 デバッグ時の部品プロパティの値の表示について
5.3.21 デバッグ時に部品プロパティの値を変更した場合の影響
5.3.22 部品プロパティの値にサロゲートペア文字および制御文字が含まれていた場合について
5.3.23 部品プロパティの値の改行コードについて(ステップ実行の中断時)
5.3.24 デバッグタスクのフロー表示について
5.3.25 デバッグタスクのフローツリー表示について
5.3.26 デバッグ時の繰り返し実行フローのフロー表示について
5.3.27 デバッグ時の繰り返し実行フローのフローツリー表示について
5.3.28 デバッグ時の繰り返し実行部品および繰り返し実行フローの表示情報について
5.4 デバッグタスクを管理する
5.4.1 すべてのデバッグタスクの状態を確認する手順
5.4.2 [タスク]画面からデバッグタスクの進捗状況を確認する手順
5.4.3 デバッグタスクの進捗状況の詳細を一覧形式で確認する手順
5.4.4 デバッグタスクのタスクログを確認する手順
5.4.5 デバッグタスクを実行停止する手順
5.4.6 デバッグタスクを強制停止する手順
5.4.7 デバッグタスクを削除する手順
5.5 サービステンプレートの運用をテストする
5.5.1 サービステンプレートの運用をテストする手順
6. サービステンプレートをリリースする
6.1 サービステンプレートをリリースする
6.1.1 サービステンプレートをリリースする手順
6.2 リリースの概要
6.2.1 リリースの概要
6.3 サービステンプレートを本番環境にインポートする(開発環境と本番環境が別の場合)
6.3.1 サービステンプレートを本番環境にインポートする手順(開発環境と本番環境が別の場合)
6.3.2 サービステンプレートの開発環境と本番環境を別にすることを推奨する理由
付録
付録A 参考情報
付録A.1 ビルドおよびリリースの参考情報
付録A.2 各バージョンの変更内容
ページの先頭へ