JP1 Version 10 JP1/Automatic Job Management System 3 - Software Development Kit 設計・構築ガイド
目次
用語
索引
前へ
2 / 182
次へ
表紙
前書き
変更内容
はじめに
1. JP1/AJS3 - SDKの概要
1.1 JP1/AJS3 - SDKの特長
1.1.1 JP1/AJS3 - SDKとは
1.1.2 JP1/AJS3 - SDKでできること
1.2 ユーザーアプリケーションでできる操作
1.3 ユーザーアプリケーションで作成できる画面例
1.4 JP1/AJS3 - SDKのシステム概要
1.4.1 JP1/AJS3 - SDKを使用したJP1/AJS3 - Managerの操作の仕組み
1.4.2 Webアプリケーションとして実装する場合のシステムの概要
1.4.3 C/Sアプリケーションとして実装する場合のシステムの概要
1.5 運用までの流れ
2. システム設計
2.1 システムの前提条件
2.1.1 前提OS
2.1.2 前提プログラム
2.2 システム設計時の検討項目一覧
2.3 システム構成の検討
2.3.1 開発環境のシステム構成(最小構成)
2.3.2 開発環境のシステム構成(基本構成)
2.3.3 実行環境のシステム構成(基本構成)
2.3.4 実行環境のシステム構成(社外アクセスを考慮した構成)
2.4 ネットワーク構成の検討
2.5 JP1/AJS3 - Managerの環境設定の検討
2.5.1 JP1/AJS3 - SDKの導入時に検討が必要なJP1/AJS3 - Managerの環境設定項目一覧
2.5.2 最大同時セッション数の検討
2.5.3 JP1/AJS3 - Managerとの接続打ち切り時間の検討
2.5.4 デスクトップヒープ領域が不足した場合のログオン情報の再利用の検討
2.5.5 スケジューラーログの出力の検討
2.5.6 開始および終了メッセージの出力の検討
2.5.7 内部ログのサイズの検討
2.5.8 ルートジョブネットのスケジュールの有効範囲の検討
2.5.9 世代情報の範囲の検討
2.5.10 JP1イベントの発行の検討
2.6 JP1/AJS3 - SDKの環境設定の検討
2.7 システム環境の検討
2.7.1 タイムゾーンの検討
2.7.2 使用する文字コードの検討
2.8 クラスタシステムでの運用の検討
2.9 クラスライブラリの参照方法の検討
3. インストールとセットアップ
3.1 インストール前の作業
3.1.1 インストール前の確認項目一覧
3.1.2 前提OSの確認
3.1.3 OSのサービスの設定の確認
3.1.4 前提プログラムの確認
3.1.5 インストールするOSユーザーの権限の確認
3.1.6 インストール先フォルダの確認
3.1.7 JP1/AJS3 - SDK運用フォルダの確認
3.2 JP1/AJS3 - SDKのインストールおよびアンインストール手順
3.2.1 新規インストール手順
3.2.2 上書きインストール手順
3.2.3 バージョンアップインストール手順
3.2.4 リモートインストール手順
3.2.5 アンインストール手順(Windows 8,Windows Server 2012,Windows 7,Windows Server 2008の場合)
3.2.6 アンインストール手順(Windows Server 2003の場合)
3.3 セットアップの作業一覧
3.4 JP1/AJS3 - Managerの設定
3.4.1 JP1/AJS3 - Managerのプロセスの起動の設定
3.4.2 JP1/AJS3 - Managerのプロセスの起動の設定手順(JP1/AJS3用起動プロセス定義ファイルが変更されていない場合)
3.4.3 JP1/AJS3 - Managerのプロセスの起動の設定手順(JP1/AJS3用起動プロセス定義ファイルが変更されている場合)
3.4.4 JP1/AJS3 - Managerのプロセスの再起動の設定
3.4.5 JP1/AJS3 - Managerの環境設定
3.4.6 JP1/AJS3 - Managerのファイアウォールの通過の設定
3.5 JP1/AJS3 - SDKの設定
3.5.1 環境設定ファイルの反映手順
3.5.2 環境設定ファイルの形式
3.5.3 環境設定ファイルの設定項目の詳細
3.5.4 環境設定ファイルを編集するときの注意事項
3.5.5 環境設定ファイルの設定例
3.5.6 資料採取ツールのセットアップ項目一覧
3.5.7 資料採取ツールのセットアップ手順
3.5.8 メモリーダンプの出力設定手順(Windows 8,Windows Server 2012,Windows 7,Windows Server 2008の場合)
3.5.9 メモリーダンプの出力設定手順(Windows Server 2003の場合)
3.5.10 クラッシュダンプの出力設定手順(Windows 8,Windows Server 2012,Windows 7,Windows Server 2008の場合)
3.5.11 クラッシュダンプの出力設定手順(Windows Server 2003の場合)
3.5.12 クラスパスへのJP1/AJS3 - SDKのクラスライブラリの追加
3.5.13 クラスパスへの日立ネットワークオブジェクトプラザトレース共通ライブラリの追加
3.5.14 Javaシステムプロパティの設定
3.5.15 トレースログのファイルサイズおよび面数の変更手順
4. ユーザーアプリケーションの設計
4.1 ユーザーアプリケーションの配布方法の検討
4.2 APIの利用方法
4.2.1 JP1/AJS3 - SDKが提供するクラス
4.2.2 API利用の流れ
4.3 ユーザーアプリケーション開発時の検討
4.3.1 APIの実装方法の検討
4.3.2 ユーザーアプリケーションの実装に関する検討
4.4 JP1/AJS3 - Managerホストへの負荷が増える操作と対策
4.4.1 多数のユーザーによるAPIの多重実行とJP1/AJS3 - Managerへの負荷
4.4.2 APIの発行間隔とJP1/AJS3 - Managerへの負荷
4.4.3 ユニットの総数および世代数によって負荷が掛かるAPI操作とJP1/AJS3 - Managerへの負荷
4.5 API利用時の注意事項
4.5.1 操作対象のユニットに対するJP1ユーザーの権限
4.5.2 APIの引数に使用できる文字
4.5.3 APIの引数のバイト数
4.5.4 操作対象のユニットの実行IDの管理
4.5.5 ユニット一覧情報の取得の対象世代
4.5.6 JP1/AJS3 - Managerからのログアウト処理の実装
4.5.7 情報取得のAPIとルートジョブネットの保存世代数
4.5.8 ユーザーアプリケーションのタイムアウト時間の設定
4.5.9 認証エラーへの対応
4.5.10 接続先のJP1/AJS3 - Managerのデータベース構成によるAPIの機能差異
5. ユーザーアプリケーションの開発
5.1 ユーザーアプリケーションの基本的な処理の流れ
5.1.1 AjsCdインスタンスを生成するコーディング例
5.1.2 AjsCdApiインスタンスを生成するコーディング例
5.1.3 JP1/AJS3 - Managerへログインするコーディング例
5.1.4 ユニット一覧情報を取得するコーディング例
5.1.5 ルートジョブネットを即時実行登録するコーディング例
5.1.6 実行したルートジョブネットの状態を取得するコーディング例
5.1.7 JP1/AJS3 - Managerからログアウトするコーディング例
5.1.8 AjsCdApiインスタンスを破棄するコーディング例
5.1.9 AjsCdインスタンスを破棄するコーディング例
5.2 画面作成例
5.2.1 ユニット一覧画面
5.2.2 ジョブフロー画面
5.2.3 実行予実績一覧画面
5.2.4 サマリー画面
5.2.5 画面作成時の注意事項
6. 運用
6.1 運用時に構成変更する場合の注意事項
6.2 運用時に構成変更した場合の対処
6.2.1 JP1/AJS3 - SDKを使用しているホストを構成変更した場合の対処
6.2.2 接続先のJP1/AJS3 - Managerホストを構成変更した場合の対処
6.3 運用時にJP1/AJS3 - Managerで操作できるコマンド一覧
7. トラブルシューティング
7.1 トラブルへの対処の流れ
7.2 ログ情報
7.2.1 ログの種類
7.2.2 ログファイル一覧
7.3 トラブル発生時に採取が必要な資料
7.3.1 トラブル発生時に採取が必要な資料一覧(Windows 8,Windows Server 2012,Windows 7,Windows Server 2008の場合)
7.3.2 トラブル発生時に採取が必要な資料一覧(Windows Server 2003の場合)
7.3.3 OSのログ情報の採取(Windows 8,Windows Server 2012,Windows 7,Windows Server 2008の場合)
7.3.4 OSのログ情報の採取(Windows Server 2003の場合)
7.3.5 JP1の情報の採取
7.3.6 プロセス一覧の採取
7.3.7 スレッドダンプの採取
7.3.8 Webアプリケーションサーバの情報の採取
7.4 資料の採取の手順
7.4.1 資料採取の作業項目(Windows 8,Windows Server 2012,Windows 7,Windows Server 2008の場合)
7.4.2 資料採取の作業項目(Windows Server 2003の場合)
7.4.3 資料採取ツールの実行手順
7.4.4 資料採取ツールの文法
7.4.5 資料採取ツールで採取される資料
7.4.6 ダンプファイルの採取手順(Windows 8,Windows Server 2012,Windows 7,Windows Server 2008の場合)
7.4.7 問題レポートの採取手順(Windows 8,Windows Server 2012,Windows 7,Windows Server 2008の場合)
7.4.8 プロセスの状態の確認手順
7.4.9 スレッドダンプの採取手順
7.4.10 Webアプリケーションサーバの情報の採取手順
7.5 トラブルへの対処方法
7.5.1 想定されるトラブル
7.5.2 インストールできない場合の対処
7.5.3 AjsCdFactoryクラスのインスタンスを取得できない場合の対処
7.5.4 環境設定ファイルの設定内容が有効にならない場合の対処
7.5.5 JP1/AJS3 - SDKが出力するトレースログのファイルサイズおよび面数の変更が有効にならない場合の対処
7.5.6 JP1/AJS3 - Managerに接続できない場合の対処
7.5.7 JP1/AJS3 - Managerの情報を取得できない場合の対処
7.5.8 JP1/AJS3 - Managerでエラーメッセージが出力された場合の対処
付録
付録A ファイルおよびフォルダ一覧
付録B ポート番号一覧
付録C 制限値一覧
付録D トレースログの出力形式
付録E (3021-3-118-10)での変更内容
付録F このマニュアルの参考情報
付録F.1 関連マニュアル
付録F.2 このマニュアルでの表記
付録F.3 このマニュアルで使用する英略語
付録F.4 このマニュアルで使用する記号
付録F.5 数式で使用する記号
付録F.6 図中で使用する記号
付録F.7 デフォルトのインストール先フォルダ
付録F.8 このマニュアルで使用する「Administrators権限」について
付録F.9 KB(キロバイト)などの単位表記について
付録G 用語解説
ページの先頭へ