Summary of amendments

Windows Server 2012 R2 was added to the list of supported operating systems.

--

JP1/IM - Service Support Advanced Edition was added as a JP1/IM - Service Support product.

Users of JP1/IM - Service Support Advanced Edition can now save Items registered in the Item management database to the Item storage database. It is now possible to specify XL size for an Item management database.

• jssdbbackup.bat command (backs up databases)

• jssdbinit.bat command (initializes databases)

• jssdbrecovery.bat command (recovers the database)

• jssdbrorg.bat command (reorganizes the Item management database)

• jsshadbinit.bat command (initializes the database in a cluster environment)

• jsshasetup.bat command (sets up JP1/IM - Service Support for a cluster environment)

• jsshaunsetup.bat command (performs unsetup of JP1/IM - Service Support in a cluster environment)

• jssitemstore command (store Items)

• jssitemstoredbexpand.bat command (expands the Item storage database area)

• jssitemstoredbrotate command (rotates Item storage databases)

• jssitemstoredbsetup.bat command (sets up the Item storage database)

• jsssetup.bat command (sets up JP1/IM - Service Support)

• jssstoreitemdel.batcommand (deletes multiple stored Items)

• jssunsetup.bat command (performs unsetup of JP1/IM - Service Support)

• Configuration file for expanding an Item storage database (jssitemstoredbexpandinfo.bat)

• Configuration file for setting up an Item storage database (jssitemstoredbinfo.bat)

• User log definition file (jp1itemstore.conf)

• User log definition file (jp1itemstoredbrotate.conf)

1.6, 2.1.2, 2.2.1, 3.1, 3.2.1, 3.2.2, 3.2.3, 3.3, 3.4, 3.5.6, 3.6, 3.6.1, 3.7, 3.7.2, 3.8, 3.9, 3.10, 3.11, 3.13, 3.16, 3.19, 3.20, 3.20.1, 3.20.2, 5.12.1, 5.13, 5.13.1, 5.13.2, 5.13.3, 5.13.4, 6.1, 6.3.1, 6.3.2, 6.4, 6.4.3, 6.5, 6.5.1, 6.6, 6.6.1, 6.6.2, 8.13, 9.1.4, 9.2, 9.5, 9.5.1, 9.5.2, 9.9, 9.9.1, 9.9.2, 9.10, 10.1.1, 10.2.1, 10.2.7, 10.2.9, 10.2.10, 10.2.11, 10.2.12, 10.2.13, 10.2.14, 10.2.15, 11. List of commands, 11. Commands that cannot be executed at the same time, 11. Status of services when commands are executed, 11. jss_log.bat (collects data), 11. jsscollectdata (counts Item information), 11. jssitemcount (counts Items), 11. jssitemdeletion (centrally places Items into the Waiting to be deleted status), 11. jssitemimport (imports Item information), 11. jssitemlist (outputs a list of Items), 11. jssdbbackup.bat (backs up databases), 11. jssdbinit.bat (initializes databases), 11. jssdbrecovery.bat (recovers a database), 11. jssdbrorg.bat (reorganizes the Item management database), 11. jssdbstatchk.bat (checks the database status), 11. jsshadbinit.bat (initializes the database in a cluster environment), 11. jsshasetup.bat (sets up JP1/IM - Service Support in a cluster environment), 11. jsshaunsetup.bat (performs unsetup of JP1/IM - Service Support in a cluster environment), 11. jssitemstore (stores Items), 11. jssitemstoredbexpand.bat (expands an Item storage database), 11. jssitemstoredbrotate (rotates Item storage databases) , 11. jssitemstoredbsetup.bat (sets up an Item storage database), 11. jsssetup.bat (sets up JP1/IM - Service Support), 11. jssstoreitemdel.bat (deletes stored Items), 11. jssunsetup.bat (performs unsetup of JP1/IM - Service Support), 12. List of definition files, 12. When the definition is applied after a definition file is changed, 12. Configuration file for expanding an Item storage database (jssitemstoredbexpandinfo.bat), 12. Configuration file for setting up an Item storage database (jssitemstoredbinfo.bat), 12. User log definition file (jp1itemcount.conf), 12. User log definition file (jp1itemstore.conf), 12. User log definition file (jp1itemstoredbrotate.conf), 13.2.2, 14.2.3, A.1, A.2, Appendix D, D.1, D.2, H.2, Appendix I

By using the Item Management window function, users can now work with Items that were registered within a specific time frame.

• System property file (hptl_jp1_imss_main_setting.properties)

3.1, 3.2, 3.2.3, 3.4.1, 3.9, 5.10, 8.11, 12. System property file (hptl_jp1_imss_main_setting.properties)

The status of multiple Items can now be changed to Acknowledged or Close in a batch operation. In addition, a consolidated JP1 event for completed-action linkage can now be issued when the status of multiple Items are changed to Close in a batch operation.

• System property file (hptl_jp1_imss_main_setting.properties)

• Configuration file for issuing JP1 events (hptl_jp1_imss_jp1event_setting.properties)

• Definition file for status-change JP1 events (hptl_jp1_imss_jp1event_status.properties)

3.1, 3.7, 3.7.1, 3.7.2, 3.9, 3.12.1, 4.1.4, 5.11.1, 8.15.1, 12. Configuration file for issuing JP1 events (hptl_jp1_imss_jp1event_setting.properties), 12. System property file (hptl_jp1_imss_main_setting.properties), Appendix E, E.1, E.2, E.3

View permission can now be set for individual Items.

• jssrefaclsetup (sets up view permission settings for individual Items)

• User log definition file (jp1refaclsetup.conf)

1.3.4, 3.2.1, 3.2.2, 3.3, 3.4, 3.5.3, 3.5.5, 3.6, 3.8.1, 3.10, 3.11, 3.11.1, 3.16, 3.16.3, 3.20.1, 5.2.1, 5.2.3, 8.1, 8.5.1, 8.12, 8.13, 9.10, 10.1.1, 11. List of commands, 11. Status of services when commands are executed, 11. jssitemedit (edits an Item), 11. jssitementry (registers an Item) , 11. jssrefaclsetup (sets up view permission settings for individual Items), 12. List of definition files, 12. When the definition is applied after a definition file is changed, 12. File for Item information entries (Optional), 12. File for extended Item information entries (Optional), 12. User log definition file (jp1refaclsetup.conf), 14.2.3, A.1, A.2

Items can now be created based on existing Items registered in JP1/IM - Service Support.

3.2.1, 3.2.2, 3.3.1, 3.5.2

Items registered in JP1/IM - Service Support can now be printed.

3.1, 3.2.1, 3.2.2, 3.3.1, 3.9, 3.10

The number of Items registered in JP1/IM - Service Support can now be checked. In addition, a message is now output if the number of Items drops below the predefined threshold when Items are counted.

• jssitemcount (command to count Items)

• System property file (hptl_jp1_imss_main_setting.properties)

• User log definition file (jp1itemcount.conf)

3.5.6, 3.20.1, 3.20.2, 8.13, 9.10, 10.1.1, 11. List of commands, 11. Status of services when commands are executed, 11. jssitemcount (counts Items), 12. List of definition files, 12. When the definition is applied after a definition file is changed, 12. System property file (hptl_jp1_imss_main_setting.properties), 12. User log definition file (jp1itemcount.conf), 14.2.3, A.1, A.2

Access-permission information can be set by using a command, and can be output to a CSV file by using a command.

• jssaclexport (command to export access-permission information)

• jssaclimport (command to import access-permission information)

• File for Item information entries (Optional)

• User log definition file (jp1aclexport.conf)

• User log definition file (jp1aclimport.conf)

3.11, 8.6, 8.13, 9.10, 10.1.1, 11. List of commands, 11. Status of services when commands are executed, 11. jssaclexport (exports access-permission information), 11. jssaclimport (imports access-permission information), 12. List of definition files, 12. When the definition is applied after a definition file is changed, 12. Access privileges input file (Optional), 12. User log definition file (jp1aclexport.conf), 12. User log definition file (jp1aclimport.conf), 14.2.3, A.1, A.2

Item information that can be reported by email was added.

• Email definition file (jp1imss_mail_setting.conf)

3.12.2, 12. Email definition file (jp1imss_mail_setting.conf)

The status of JP1/IM - Service Support databases can now be checked.

• jssdbstatchk.bat (command to check the database status)

3.20.1, 3.20.2, 5.13.1, 5.13.2, 5.13.3, 10.2.11, 11. List of commands, 11. Status of services when commands are executed, 11. jssdbstatchk.bat (checks the database status)

Precautionary notes on running anti-virus software were added.

5.16

Version upgrading procedures were added.

6.1, 6.2.3, 6.4, 6.4.2, 6.6.1, 6.6.2, 8.15.1, 8.19, 9.2, 9.3, 9.8, 9.8.1, 9.9.1, 11. jsshasetup.bat (sets up JP1/IM - Service Support in a cluster environment), 11. jsssetup.bat (sets up JP1/IM - Service Support)

The following messages were added:

• KNAB10035-E

• KNAB11044-E to KNAB11048-E

• KNAB12014-E

• KNAB20041-I to KNAB20043-I

• KNAB20150-I to KNAB20151-I

• KNAB20277-I to KNAB20299-I

• KNAB20300-I to KNAB20303-I

• KNAB22028-W to KNAB22030-W

• KNAB24114-E to KNAB24115-E

• KNAB24226-E to KNAB24233-E

• KNAB26097-E

• KNAB26157-E

• KNAB26159-E to KNAB26161-E

• KNAB26163-E

• KNAB26165-E to KNAB26168-E

• KNAB26170-E to KNAB26174-E

• KNAB26176-E

• KNAB26178-E to KNAB26186-E

• KNAB26188-E to KNAB26198-E

• KNAB26223-E

• KNAB28033-E to KNAB28036-E

• KNAB28105-E

• KNAB28121-E to KNAB28125-E

• KNAB99050-E

13.1, 13.5, 13.6, 13.8

The following message was deleted:

• KNAB20274-I

13.1, 13.6

The operator action was changed for the following messages:

• KNAB12001-E

• KNAB24002-E

• KNAB26144-E

• KNAB28011-E

13.5, 13.6

The system action was changed for the following messages:

• KNAB13005-W

• KNAB26149-E

13.5, 13.6

The explanation was changed for the following messages:

• KNAB20026-I

• KNAB20028-I

• KNAB20272-I

• KNAB22022-W

13.6

The message text was changed for the following messages:

• KNAB20125-I

• KNAB20133-I

• KNAB26154-E

13.6

The message text and operator action were changed for the following messages:

• KNAB26102-E to KNAB26103-E

13.6