Contents

• Notices

• Summary of amendments

• Preface

• 1. New Installation

  • 1.1 New installation procedure

  • 1.2 Pre-installation tasks

    • 1.2.1 Checking installation prerequisites

    • 1.2.2 Language settings in the JP1/AO server OS

  • 1.3 New installation of JP1/AO

    • 1.3.1 Procedure to perform a new installation of JP1/AO

    • 1.3.2 Installation procedure using the Hitachi Program Product Installer

    • 1.3.3 Installation folder for each product

    • 1.3.4 Installation folders for databases

    • 1.3.5 Database backup folder

    • 1.3.6 Characters that can be specified in installation, database, and backup folder names

    • 1.3.7 Characters that can be specified in the host name and IP address of the JP1/AO server

  • 1.4 Procedure to install the manual

  • 1.5 Installing JP1/AO Content Pack

    • 1.5.1 Procedure to install JP1/AO Content Pack

    • 1.5.2 JP1/AO Content Pack installation folder

  • 1.6 Procedure to enable HTTPS connections between Web browsers and JP1/AO

    • 1.6.1 Communication protocols available for JP1/AO for connecting to a Web browser

    • 1.6.2 Procedure to acquire an SSL server certificate necessary for HTTPS connections

    • 1.6.3 Procedure to enable HTTPS connections

  • 1.7 SSH connections with operation target devices

    • 1.7.1 SSH connection authentication method available for JP1/AO

    • 1.7.2 Public key authentication available for JP1/AO

    • 1.7.3 Deploying public keys and private keys in a cluster configuration

    • 1.7.4 Procedure to set public key authentication for SSH connections

  • 1.8 Procedure to import SSL server certificates for https connections between JP1/AO and external Web servers into Common Component

• 2. Post-Installation Environment Settings

  • 2.1 Procedure for setting the JP1/AO environment

  • 2.2 User-specified properties file (config_user.properties)

  • 2.3 Command property file (command_user.properties)

  • 2.4 Email notification definition files (mailDefinition_ja.conf, mailDefinition_en.conf, mailDefinition_zh.conf)

  • 2.5 Security definition file (security.conf)

  • 2.6 Connection-destination property file (connection-destination-name.properties)

  • 2.7 Character-set mapping file (charsetMapping_user.properties)

  • 2.8 Configuration file for external authentication server linkage (exauth.properties)

  • 2.9 Settings for automatically starting JP1/AO when the OS starts (in Linux)

• 3. Linking to other products

  • 3.1 Linking to the JP1/Base authentication function

    • 3.1.1 Procedure for linking to the JP1/Base authentication function

    • 3.1.2 Procedure for setting up the configuration file for external authentication server linkage

    • 3.1.3 Procedure to create and configure JP1 users (JP1/Base linkage)

    • 3.1.4 Defining permission levels in JP1/Base (JP1/Base linkage)

    • 3.1.5 Procedure to check the link to JP1/Base

  • 3.2 Linking with Active Directory

    • 3.2.1 Procedure to link with Active Directory

    • 3.2.2 Registering users in Active Directory

    • 3.2.3 Registering information in the configuration file for external authentication server linkage

    • 3.2.4 Registering LDAP search information

    • 3.2.5 Checking JP1/AO connection with Active Directory

    • 3.2.6 Registering user information in JP1/AO

    • 3.2.7 Assigning roles to Active Directory groups

  • 3.3 Linking to the JP1/IM event monitoring function

    • 3.3.1 Procedure for linking to the JP1/IM event monitoring function

    • 3.3.2 Definition files used for linking to JP1/IM

    • 3.3.3 Integrated function menu definition file (hitachi_jp1_ao_tree.conf)

    • 3.3.4 Target folders into which definition files for linking to JP1/IM (in a Windows environment) are copied

    • 3.3.5 Target directories into which definition files for linking to JP1/IM (for a UNIX environment) are copied

• 4. Changing System Information

  • 4.1 Procedure to change the JP1/AO installation folder

  • 4.2 Procedure to change the database installation folder

  • 4.3 Procedure to change the host name of the JP1/AO server

    • 4.3.1 Procedure to change the host name of the JP1/AO server (non-cluster system)

    • 4.3.2 Procedure to change the host name of the JP1/AO server (cluster system)

  • 4.4 Procedure to change the IP address of the JP1/AO server

    • 4.4.1 Procedure to change the IP address of the JP1/AO server (non-cluster system)

    • 4.4.2 Procedure to change the IP address of the JP1/AO server (cluster system)

  • 4.5 Procedure to change the port number

    • 4.5.1 Procedure to change the port number used for communications between JP1/AO and Web browsers

    • 4.5.2 Procedure to change the port number between JP1/AO and the SMTP server

  • 4.6 Procedure to change the URL

  • 4.7 Procedures to change the time on the JP1/AO server

    • 4.7.1 Procedure to move the time forward on the JP1/AO server

    • 4.7.2 Procedure to move the time back on the JP1/AO server

  • 4.8 Procedure to change the maximum number of plug-ins that can be executed concurrently

• 5. Setting up a cluster system

  • 5.1 Procedure for installing JP1/AO in a cluster system

  • 5.2 Installation prerequisites (for cluster systems)

  • 5.3 Installing JP1/AO in a cluster system

    • 5.3.1 Tasks required before installation of JP1/AO in a cluster system

    • 5.3.2 Procedure for creating a resource group by using the cluster software

    • 5.3.3 Procedures for installing JP1/AO on the active server and standby server

    • 5.3.4 Procedure for setting up the active server

    • 5.3.5 Procedure for setting up the standby server

    • 5.3.6 Procedure for using the cluster software to register services (in Windows)

    • 5.3.7 Procedure for using the cluster software to register resources and to set up the resource group (in Linux)

  • 5.4 Installing JP1/AO in a cluster system (if Common Component is already installed in a cluster configuration)

    • 5.4.1 Tasks required before installation of JP1/AO in a cluster system (if Common Component is already installed in a cluster configuration)

    • 5.4.2 Procedure for configuring services before installation (if Common Component is already installed)

    • 5.4.3 Procedures for installing JP1/AO on the active server and standby server (if Common Component is already installed)

    • 5.4.4 Procedure for setting up the active server (if Common Component is already installed)

    • 5.4.5 Procedure for setting up the standby server (if Common Component is already installed)

    • 5.4.6 Procedure to register services by using the cluster software (if Common Component is already installed)

  • 5.5 Cluster settings file (cluster.conf)

  • 5.6 Folders created on the JP1/AO shared disk

  • 5.7 Cluster service control commands to be registered in the cluster software

    • 5.7.1 Tasks required before the cluster service control commands can be registered

    • 5.7.2 Command that controls the database for Common Component (sc_hbase64_hirdb)

    • 5.7.3 Command that controls the HBase 64 Storage Mgmt SSO Service (sc_hbase64_hsso command)

    • 5.7.4 Command that controls the HBase 64 Storage Mgmt Web SSO Service (sc_hbase64_hweb)

    • 5.7.5 Command that controls the HBase 64 Storage Mgmt Web Service (sc_hbase64_web)

    • 5.7.6 Command that controls the HAutomation Engine Web Service (sc_automation)

• 6. Overwrite or upgrade installation

  • 6.1 Overwrite or upgrade installation procedure

  • 6.2 Tasks required before an upgrade installation (when upgrading from version 10 to 11)

  • 6.3 Procedure to perform an overwrite or upgrade installation of JP1/AO (non-cluster system)

  • 6.4 Tasks required after an upgrade installation

    • 6.4.1 Tasks required after an upgrade installation (when upgrading from version 10 to 11)

    • 6.4.2 Tasks required after an upgrade installation (when automatic startup for JP1/AJS3 is enabled)

    • 6.4.3 Tasks required after an upgrade installation (in an environment in which JP1/AO coexists with JP1/AJS3)

  • 6.5 Procedure to perform an overwrite or upgrade installation of JP1/AO (for a Windows cluster system)

    • 6.5.1 Tasks that must be completed before an overwrite or upgrade installation (Windows)

    • 6.5.2 Procedure to configure services before overwrite or upgrade installation (Windows)

    • 6.5.3 Procedure to perform an overwrite or upgrade installation of JP1/AO on the active server(Windows)

    • 6.5.4 Procedure to perform an overwrite or upgrade installation of JP1/AO on the standby server (Windows)

    • 6.5.5 Procedure for enabling failover of the resource group (Windows)

  • 6.6 Procedure to perform an overwrite or upgrade installation of JP1/AO (for a Linux cluster system)

    • 6.6.1 Tasks that must be completed before an overwrite or upgrade installation (Linux)

    • 6.6.2 Procedure to configure resources before overwrite or upgrade installation (Linux)

    • 6.6.3 Procedure to perform an overwrite or upgrade installation of JP1/AO on the active server(Linux)

    • 6.6.4 Procedure to perform an overwrite or upgrade installation of JP1/AO on the standby server (Linux)

    • 6.6.5 Procedure for changing resource settings (Linux)

  • 6.7 Procedure to perform an overwrite installation of JP1/AO Content Pack

• 7. Uninstallation

  • 7.1 Uninstallation procedure

  • 7.2 Prepare for uninstallation

  • 7.3 Procedure to uninstall JP1/AO (non-cluster system)

  • 7.4 Procedure to uninstall JP1/AO (cluster system)

    • 7.4.1 Procedure to configure services before uninstallation (for a cluster system in Windows)

    • 7.4.2 Procedure to configure resources before uninstallation (for a cluster system in Linux)

    • 7.4.3 Procedure to uninstall JP1/AO and related products (cluster system)

    • 7.4.4 Procedure to delete folders created in the shared folder (cluster system)

    • 7.4.5 Procedure to delete services from the cluster software (for a cluster system in Windows)

    • 7.4.6 Procedure to delete resources from the cluster software (for a cluster system in Linux)

  • 7.5 Procedure to uninstall JP1/AO - Contents and JP1/AO Content Pack

• 8. Server Migration

  • 8.1 JP1/AO system migration procedure (to an environment with the same host name or IP address)

  • 8.2 JP1/AO system migration procedure (to an environment with a different host name or IP address)

• 9. Troubleshooting During Setup

  • 9.1 What to do if you are unable to resolve the problem based on what is displayed in the error dialog box

• Appendix

  • A. Reference Information

    • A.1 List of folders (in Windows)

    • A.2 List of folders (in Linux)

    • A.3 Information necessary to perform operations on the scheduler services and embedded databases in a configuration in which JP1/AO coexists with JP1/AJS3

    • A.4 Version changes

• Index

To Page Top