1.3.1 Procedure to perform a new installation of JP1/AO

Before you begin

Perform all of the tasks that are required prior to installing JP1/AO, such as checking prerequisites.

To perform a new installation of JP1/AO:

1. Set the distribution media, and then execute the Hitachi Integrated Installer or Hitachi Program Product Installer.

   (If you choose to use the Hitachi Program Product Installer) For details about how to use the Hitachi Program Product Installer, see 1.3.2 Installation procedure using the Hitachi Program Product Installer. When installation by the Hitachi Program Product Installer finishes, perform the procedure from step 8.

2. Continue the configuration process as prompted by the wizard.^#

   • Specify the JP1/AO installation folder.

3. Check the summary that is displayed to verify the settings that you have entered in the wizard thus far.^#

   If necessary, you can click the Edit settings button and change the following items:

   • Installation folders for the databases

   • IP address or host name of the JP1/AO server

   • Port number of the JP1/AO server

   • Backup execution flag and backup folder

     In case of a failure during installation, you can back up the database that is shared with the Hitachi Command Suite products, and can set the folder in which the database is to be backed up. You must specify these settings only if Hitachi Command Suite products have already been installed.

4. Click the Install button to start the installation of JP1/AO.

   When the installation of JP1/AO is complete, the JP1/AO - Contents installation wizard is displayed.^#

5. Specify the JP1/AO - Contents installation folder.^#

6. Check the summary that is displayed to verify the settings that you have entered in the wizard thus far.^#

7. Click the Install button to start the installation of JP1/AO - Contents.^#

8. If the OS is Windows, if you specify a port number that is not the default port number, you must perform the procedure for changing the port number.

9. After the installation is complete, execute the hcmds64srv command with the start option specified to start the JP1/AO services.

#

If the Hitachi Program Product Installer is used, the installation wizard is not displayed during installation. When JP1/AO is installed, JP1/AO - Contents is also installed.

Important

• In Linux, do not specify a symbolic link as the installation destination. If you specify a symbolic link, installation will fail.

• If you interrupt the installation process, it might leave empty folders. You can manually delete any empty folders that were created.

• If Common Component fails to install and you have to reinstall, you cannot specify an installation destination that is different from the previous destination. Even if you enter a different destination, it will automatically be installed in the previous installation destination.

Results of procedure

• The product names listed below are displayed in the Programs and Features window displayed by clicking Windows Control Panel, Programs and then Programs and Features.

  Table 1‒3: Product names displayed in the Programs and Features window

  Product name	Version
  JP1/Automatic Operation	vv.rr.mm
  JP1/Automatic Operation - Contents	vv.rr.mm

• If the OS is Windows, JP1_Automatic Operation is added to All Programs in the Start menu.

• If the OS is Windows, some of the ports that JP1/AO uses for external connections are registered as firewall exceptions.