JP1 Version 10 JP1/Automatic Job Management System 3 運用ガイド
目次
用語
索引
前へ
2 / 219
次へ
表紙
前書き
変更内容
はじめに
1. JP1/AJS3を使用したシステム運用の概要
1.1 運用サイクルの例
1.2 運用中に実施する作業内容
2. バックアップとリカバリー
2.1 バックアップとリカバリーの概要
2.1.1 バックアップの概要
2.1.2 リカバリーの概要
2.2 JP1/AJS3を使用するシステムの設定情報のバックアップ
2.2.1 JP1/Baseの設定情報のバックアップ
2.2.2 JP1/AJS3 - Managerの設定情報のバックアップ
2.2.3 JP1/AJS3 - Agentの設定情報のバックアップ
2.2.4 JP1/AJS3 - Viewの設定情報のバックアップ
2.2.5 その他の情報のバックアップ
2.3 JP1/AJS3を使用するシステムの設定情報のリカバリー
2.3.1 JP1/BaseおよびJP1/AJS3のインストールとセットアップ
2.3.2 JP1/Baseの設定情報のリカバリー
2.3.3 JP1/AJS3 - Managerの設定情報のリカバリー
2.3.4 JP1/AJS3 - Agentの設定情報のリカバリー
2.3.5 JP1/AJS3 - Viewの設定情報のリカバリー
2.3.6 その他の情報のリカバリー
2.4 システム全体のバックアップとリカバリー
2.4.1 マネージャーホスト側をコールドスタートする場合
2.4.2 エージェントホスト側をコールドスタートする場合
2.4.3 システム全体のバックアップとリカバリーに関する注意事項
3. データベースのバックアップとリカバリー
3.1 運用方法によるバックアップとリカバリー
3.1.1 システムログを使用しない運用でのバックアップとリカバリー
3.1.2 アンロードログ運用でのバックアップとリカバリー
4. ジョブネットの退避・回復
4.1 ジョブネットの退避・回復の概要
4.1.1 退避・回復の機能
4.1.2 退避および回復時の注意事項
4.2 ajsprint,ajsdefineコマンドによるジョブネットの退避・回復の操作
4.2.1 ajsprintコマンドでユニットを退避する手順
4.2.2 ajsdefineコマンドでユニットを回復する手順
4.3 ajsbackup,ajsrestoreコマンドまたはJP1/AJS3 - Viewによるジョブネットの退避・回復の操作
4.3.1 ajsbackupコマンドまたはJP1/AJS3 - Viewで退避した情報の格納場所
4.3.2 ajsbackupコマンドまたはJP1/AJS3 - Viewでユニットを退避する手順
4.3.3 ajsrestoreコマンドまたはJP1/AJS3 - Viewでユニットを回復する手順
4.3.4 退避ボックスの属性を変更および表示する(UNIX限定)
4.3.5 退避ボックスまたは退避ファイルを削除する
4.3.6 退避ボックス中のユニットの一覧を表示する
4.4 ajsrgexport,ajsrgimportコマンドによるジョブネットの実行登録状態のバックアップ・リカバリー
4.4.1 実行登録状態のバックアップ・リカバリーの概要
4.4.2 実行登録状態のバックアップ・リカバリーの前提条件
4.4.3 実行登録状態のバックアップ・リカバリーの注意事項
4.4.4 ajsrgexportコマンドで登録予定情報をエクスポートする手順
4.4.5 ajsrgimportコマンドで登録予定情報をインポートする手順
5. ジョブネットの監視
5.1 ジョブネットの実行結果の確認と実行時間の監視
5.1.1 ジョブネットの実行結果を確認する
5.1.2 ジョブネットの実行時間を監視する
6. キャパシティの監視
6.1 ログファイルのサイズと出力されるログ情報を確認する
6.2 データベースの使用状況を確認する
6.2.1 データベース使用状況の確認方法
6.2.2 QUEUEジョブ,サブミットジョブの実行環境で使用するISAMファイルの未使用領域の確認方法と再編成の時期
7. JP1/AJS3のサービスの起動と停止
7.1 JP1/AJS3のサービスを起動または終了する
7.1.1 JP1/AJS3のサービスを手動で起動する
7.1.2 JP1/AJS3のサービスを手動で終了する
7.2 JP1/AJS3の起動時または終了時の動作を変更する
7.2.1 JP1/AJS3起動時の動作を一時的に変更する
7.2.2 JP1/AJS3終了時の動作を一時的に変更する
7.3 JP1/AJS3のプロセスが異常終了した場合のJP1/AJS3の動作を変更する
7.3.1 異常終了したJP1/AJS3のプロセスを再起動する
7.3.2 JP1/AJS3のプロセスが起動,停止,または異常終了したときにJP1イベントを発行する
7.3.3 jp1ajs_param.confファイルの形式
7.4 JP1/AJS3サービス再起動時のジョブの再サブミット
8. 運用中の設定変更
8.1 設定変更のポイント
8.2 ジョブネットやジョブの実行を抑止する
8.2.1 スケジューラーサービス起動時のジョブネットおよびジョブの実行抑止
8.2.2 運用中のジョブネットおよびジョブの実行抑止
8.3 実行登録中にジョブネットの定義を切り替える
8.3.1 リリース登録までの流れ
8.3.2 リリース登録
8.3.3 リリース登録後のジョブネット定義の状態
8.3.4 リリースのタイミング
8.3.5 リリース情報の表示
8.3.6 リリース登録後の実行予定の確認
8.3.7 リリース中止
8.3.8 ジョブネットリリース機能の運用方法
8.4 実行登録中にユニット定義情報を変更する
8.4.1 実行登録中に変更したユニット定義情報を有効にする設定で有効になるユニット定義情報について
8.4.2 実行登録中に変更したユニット定義情報を有効にする
8.5 スケジューラーサービスだけを起動・停止する
8.5.1 スケジューラーサービスを起動する
8.5.2 スケジューラーサービスを停止する
8.6 スケジューラーサービスのローカル日時を定義する
8.7 スケジューラーログを交代する
8.8 実行エージェントの情報を変更する
8.8.1 実行エージェントを追加・削除・変更する
8.8.2 実行エージェントを一括定義する
8.9 JP1/AJS3が動作しているホストの設定を変更する
8.9.1 JP1/AJS3が動作しているホストの名称を変更する
8.9.2 JP1/AJS3が動作しているホストのIPアドレスを変更する
8.9.3 システムの日時を変更する
8.9.4 夏時間対応のタイムゾーンでJP1/AJS3を運用する
8.9.5 イベントジョブを使用したDNS運用時にFQDN形式のホスト名での運用に変更する
8.10 運用プロファイルの設定を変更する
8.10.1 運用プロファイルの設定変更が反映されるタイミング
8.10.2 運用プロファイルの設定変更の手順
8.10.3 実行エージェントプロファイルの設定変更
8.10.4 ユニット属性プロファイルの設定変更
8.11 接続元制限の設定を変更する
8.11.1 接続元制限の有効と無効を切り替える
8.11.2 JP1/AJS3への接続を許可する接続元を変更する
8.12 QUEUEジョブ,サブミットジョブの実行環境を変更する
8.12.1 エージェントホストおよびキューを追加・削除・変更する
8.12.2 デフォルトキューおよびキューを接続解除・接続する
8.12.3 排他実行リソースを変更する
9. さまざまな運用方法
9.1 起動条件に関する運用方法
9.1.1 起動条件監視中のジョブネットの停止
9.1.2 実行登録後に起動条件に定義したイベントジョブの定義を変更する
9.2 イベントジョブに関する運用方法
9.2.1 JP1/AJS3のサービスが停止してもイベントジョブの実行を継続させる
9.3 待ち合わせ条件に関する運用方法
9.3.1 待ち合わせ条件の設定を一時的に変更する
9.3.2 登録解除しないで待ち合わせ条件の定義を変更する
9.3.3 待ち合わせ対象ユニットの状態および待ち合わせ状態から,待ち合わせの状況を確認する
9.3.4 待ち合わせ条件付きユニットを検索する
10. データベースのメンテナンス
10.1 メンテナンス時期の見積もり
10.1.1 データベース領域の解析
10.1.2 領域不足のメッセージ
10.2 メンテナンスの実行
10.2.1 ajsembdbreclaimコマンドを実行する場合
10.2.2 データベースを再編成する場合
10.3 QUEUEジョブ,サブミットジョブを使用している場合のデータベース再編成
10.3.1 ISAMデータベースの再編成
11. クラスタシステムでの運用
11.1 クラスタシステムの概要
11.1.1 JP1/AJS3のクラスタシステムでの前提条件とサポート範囲
11.1.2 JP1/AJS3がサポートするシステム構成
11.1.3 クラスタシステムでJP1/AJS3 Consoleを使用した構成例
11.2 障害発生時の系切り替えの流れ
11.2.1 JP1/AJS3 - Managerに障害が発生した場合のフェールオーバー
11.2.2 JP1/AJS3 - Agentに障害が発生した場合のフェールオーバー
11.3 クラスタシステムでのJP1/AJS3のプロセス監視
11.3.1 JP1/AJS3のプロセス監視
11.3.2 JP1/AJS3のプロセスの動作監視中に異常を検知した場合の対処
11.4 クラスタシステム対応のユーティリティ(UNIX限定)
11.4.1 JP1/AJS3強制停止シェルスクリプト(jajs_killall.clusterコマンド)
11.5 非クラスタ環境での論理ホスト運用
11.5.1 非クラスタ環境の論理ホストを運用する場合の見積もり
11.5.2 非クラスタ環境で論理ホストを運用する場合の設定
11.5.3 非クラスタ環境の論理ホスト上での運用
11.6 クラスタシステムでの注意事項
11.6.1 クラスタシステム運用時の注意事項
12. JP1/AJS3のディザスター・リカバリー
12.1 JP1/AJS3のディザスター・リカバリー運用
12.1.1 ディザスター・リカバリーの仕組み
12.1.2 ディザスター・リカバリー運用の前提条件とサポート範囲
12.1.3 JP1/AJS3が対応するディザスター・リカバリーのシステム構成
12.1.4 JP1/AJS3の共有ディレクトリの情報以外で業務に必要なデータの配置
12.2 運用の切り替え
12.2.1 リモートサイトに運用を切り替える
12.2.2 メインサイトを再構築する
12.2.3 メインサイトに運用を切り戻す
12.3 ディザスター・リカバリー運用中の設定変更
12.3.1 ディザスター・リカバリー運用設定変更の種類
12.3.2 ディザスター・リカバリー運用設定変更の手順
12.4 ディザスター・リカバリー運用をやめる場合の操作
12.4.1 ディザスター・リカバリー運用をやめる場合の操作(メインサイトとリモートサイトの論理ホスト名が別名のとき)
12.4.2 ディザスター・リカバリー運用をやめる場合の操作(メインサイトとリモートサイトの論理ホスト名が同一名のとき)
13. ケーススタディ
13.1 ケーススタディの事例一覧
13.1.1 ユーザーごとのジョブの稼働実績を知りたい
13.1.2 実行エージェントの指定誤りなどによる,不正なジョブ実行を防止したい
13.1.3 毎日実行するジョブの実行結果を,日付ごとに異なるファイル名で保存したい
13.1.4 リリース登録によって削除された一時変更をリリース登録後の実行予定に対して再反映したい
13.1.5 マネージャー・エージェント構成でイベントジョブの実行先ホストにエイリアスホスト名を使用したい
13.1.6 JP1/AJS3 - Managerの運用をジョブの実行だけに限定して使用するリソースを低減したい
13.1.7 1台のマネージャーホストで,スケジューラーサービスごとに業務の運用を独立させたい
13.1.8 JP1/AJS3 - Viewで定義済みのユニットを編集して,編集前後の定義内容を比較したい
付録
付録A JP1/AJS3が発行するJP1イベント
付録A.1 JP1イベント一覧
付録A.2 JP1イベントの属性
付録B 各バージョンの変更内容
付録B.1 10-50の変更内容
付録B.2 10-10の変更内容
付録B.3 10-00の変更内容
付録B.4 09-50の変更内容
付録B.5 09-10の変更内容
付録B.6 09-00の変更内容
付録B.7 08-50の変更内容
付録B.8 08-10の変更内容
付録B.9 08-00の変更内容
付録B.10 07-50の変更内容
付録B.11 07-11の変更内容
付録B.12 07-10の変更内容
付録B.13 07-00の変更内容
付録C このマニュアルの参考情報
付録C.1 関連マニュアル
付録C.2 このマニュアルでの表記
付録C.3 このマニュアルで使用する英略語
付録C.4 マニュアルで使用する記号
付録C.5 コマンドの文法に使用する記号
付録C.6 数式で使用する記号
付録C.7 図中で使用する記号
付録C.8 Windows版JP1/AJS3のデフォルトのインストール先フォルダ
付録C.9 Windowsの[スタート]メニューについて
付録C.10 このマニュアルで使用する「Administrators権限」について
付録C.11 オンラインマニュアルについて
付録C.12 このマニュアルで使用するフォルダ名またはディレクトリ名
付録C.13 JP1/AJS3で使用できる正規表現について
付録C.14 JIS 2004(JIS X 0213:2004)で追加された第3水準,第4水準漢字について
付録C.15 NNM連携について
付録C.16 KB(キロバイト)などの単位表記について
付録D 用語解説
ページの先頭へ