OpenTP1 Version 7 Description
![[Contents]](FIGURE/CONTENT.GIF)
![[Glossary]](FIGURE/GLOSS.GIF)
![[Index]](FIGURE/INDEX.GIF)
![[Back]](FIGURE/FRONT.GIF)
![[Next]](FIGURE/AFTER.GIF)
Index
[A][B][C][D][E][F][G][H][I][J][K][L][M][N][O][P][Q][R][S][T][U][V][W][X]
- (A)
- abbreviations for products
- abnormal termination
- from status file error
- no swappable file
- recovering from UAP
- access mode for TAM table
- acronyms
- ans-type
- Application Activate facility
- Application Activate facility
- Application Program
- application startup
- application startup process
- archive journal file
- available status of
- available/current status of
- available/standby status of
- creating
- duplicating
- element file name in
- filegroup name in
- numbers of parallel accesses
- parallel access facility for
- physical file name in
- purpose of
- recovering from error
- status of
- structure of
- unavailable status of
- unloading
- unloading
- with Global Archive Journal facility
- archive-journal source node
- archive-journal target node
- association
- asynchronous-response RPC
- asynchronous-response RPC
- automatic connection mode
- automatic system switchover
- (B)
- backing up
- DAM and TAM
- DAM file online
- OpenTP1 file system
- balancing load
- among nodes
- with Multiserver facility
- block in deferred update
- block length extension facility
- branch, specifying
- buffer area, saving shared memory in
- (C)
- C function for DAM file
- C++
- C++
- cache block
- cache block securing
- cacheless access
- called
- calling
- chained RPC
- changing
- definitions
- file capacity
- network configuration while online
- replacing UAPs online
- SPP online
- checkpoint
- checkpoint dump file
- checkpoint dump file
- adding physical file for
- duplicated
- fallback facility for
- operation when, is duplicated
- purpose of
- recovering from error
- structure of
- clean-up processing
- client
- service-using program used as
- software, using
- Client .NET
- client facility
- client gateway program
- client service
- definition of
- client UAP
- client user program
- client user program
- client/server configuration
- client/server configuration
- communication protocol
- CLTIN
- CLTOUT
- cluster system with Multinode facility
- command used to start UAP
- commit
- commit
- heuristic
- heuristic decision
- two-phase
- commit processing
- communication
- in client/server configuration
- via RPC
- via RPC that uses TxRPC interface
- via RPC that uses XATMI interface
- with TP1/Client
- with XDM/DCCM3
- communication functions
- asynchronous
- synchronous
- communication protocol
- client/server configuration
- product
- communication resource manager
- communication resource manager
- compatibility with ORACLE
- complete recovery
- complete recovery
- opening reserved filegroup at
- service recovery in
- system recovery in
- transaction recovery in
- configuration example
- connection
- connection mode
- Connector .NET
- cont-type
- continuous inquiry response type
- conventions
- abbreviations for products
- acronyms
- diagrams
- fonts and symbols
- KB, MB, GB, and TB
- version numbers
- Cosminexus TP1 Connector
- creating
- archive journal file
- checkpoint dump file
- DAM file
- DAM file
- MCF message queue file
- MQA message queue file
- OpenTP1 file system
- server recovery journal file
- status file
- system journal file
- TAM file
- TAM file
- CRM
- CUP
- current status of
- archive journal file
- status file
- system journal file
- system journal file
- (D)
- DAM
- DAM file
- access to unrecoverable
- compared to TAM file
- creating
- deadlock in
- deferred update of
- description of
- FRC (file recovery) facility
- I/O function for
- lock on
- offline backup of
- online backup of
- recovering from error
- dambkup
- damfrc
- damhold
- damload
- damload
- damrm
- data operations using extended presentation facility
- database management system, accessing
- DBMS
- dc_clt_cltin_s()
- dc_clt_cltout_s()
- dc_dam_create()
- dc_dam_put()
- dc_jnl_ujput()
- dc_lck_release_all()
- dc_lck_release_byname()
- dc_mcf_execap()
- dc_mcf_execap()
- dc_mcf_receive()
- dc_mcf_receive()
- dc_mcf_recvsync
- dc_mcf_reply()
- dc_mcf_rollback()
- dc_mcf_send function
- dc_mcf_send()
- dc_mcf_sendrecv
- dc_mcf_sendsync
- dc_rpc_call()
- dc_rpc_cltsend()
- dc_rpc_set_service_prio()
- dc_tam_close()
- dc_tam_open()
- dc_tam_read()
- dc_tam_read()
- dc_trn_begin()
- dc_trn_begin()
- dc_trn_begin()
- dc_trn_begin()
- dc_trn_chained_commit()
- dc_trn_chained_rollback()
- dc_trn_chained_rollback()
- dc_trn_unchained_commit()
- dc_trn_unchained_rollback()
- dclog1
- dclog2
- dcmstart
- dcmstop
- dcndls
- dcreset
- dcsetup
- dcsetup
- dcshmls
- dcstart
- dcstart
- dcstop
- dcstop
- dcstop
- dcsvstart
- dcsvstart
- deadlock
- deadlock
- recovering from
- debugging
- deferred update of DAM file
- definitions
- changing
- necessary for using remote API facility
- with DBMS
- delvcmd
- diagram conventions
- disk
- mirroring
- partitioning for file system
- disk queue
- disk queue
- processing when, is full
- distributed transaction processing
- distributed transactions
- distributions
- maximum number of
- minimum number of
- domain name system
- DTP model
- configuration of
- duplicated system
- duplicating
- archive journal file
- checkpoint dump file
- journals
- dynamic connection schedule mode
- (E)
- element file name
- entity, terminal
- environment
- setting up
- setting up
- setup tasks performed by OpenTP1 administrator
- setup tasks performed by superuser
- variables, setting
- error recovery
- EX lock mode
- example of
- possible configuration
- process control with Multiserver facility
- using remote API facility
- extended internode load-balancing facility
- extended presentation facility
- extended presentation facility
- Microsoft Windows with
- X/P system with
- X/W system with
- extended RM registration definition
- (F)
- facilities
- application activate
- application activate
- DAM FRC (file recovery)
- extended presentation
- file recovery journal integration
- for monitoring node registered in RPC suppression list
- for obtaining message log
- global archive journal
- integrated system management
- journal duplicating
- journal editing
- journal maintenance
- locking
- multinode
- multiserver
- multiserver
- multiserver
- statistics output
- System Switchover
- testing and debugging
- fail-safe system
- failure recovery
- fallback facility
- for checkpoint dump
- guaranteed-valid generation when using
- fallback using memory queue
- fallback using memory queue
- FIFO
- when scheduling messages to MHP
- when scheduling service requests
- FIL event trace
- FIL event trace information file
- filchmod
- filchown
- file capacity, changing
- file error
- file recovery journal integrating facility
- file recovery journal, integrating
- file system
- assigning
- backing up/restoring
- filegroup
- in archive journal file
- in checkpoint dump file
- in status file
- in system journal file
- filegroup name
- filegroup name
- files
- archive journal
- changing capacity of
- creating OpenTP1 file system
- DAM file
- element file name
- message log
- physical file name
- status
- system journal
- TAM file
- filmkfs
- font conventions
- forced normal termination
- forced termination
- FRC (file recovery) facility
- front-end processor
- (G)
- GB meaning
- generation, guaranteed-valid
- Global Archive Journal facility
- Global Archive Journal facility
- global archive unloaded-journals file
- global cache
- global search facility
- global transaction
- global transaction
- grouped system switchover
- guaranteed-valid generation
- when using fallback facility
- (H)
- HAmonitor
- HAmonitor
- heuristic decision
- heuristic decision
- heuristic mix
- processing in
- transaction determination
- heuristic hazard
- heuristic mix
- hold message
- host, multi-homed
- hot-standby system
- (I)
- I/O function for DAM file
- IDL compiler with TxRPC interface
- IDL-only TxRPC
- infinite loop, recovering from
- input function for DAM file
- input queue
- input queue
- description of
- inquiry-response communication
- integrated journal file
- integrated system management facility
- interface definition language file
- interfaces among UAP, TM, RM, and CRM
- internal channel
- internode load-balancing facility
- internode load-balancing facility
- internode shared table
- access environment for
- accessing
- overview of
- structure of
- IP address, correspondence between OpenTP1 instance and
- ISAM file
- ISAM file
- ISAM file
- recovering from error
- IST service
- configuration of
- (J)
- J2EE Connector Architecture
- JNL performance verification trace
- JNL performance verification trace information file
- jnlcolc
- jnlcopy
- jnldelpf
- jnledit
- jnlinit
- jnlinit
- jnlls
- jnlmcst
- jnlmkrf
- jnlmkrf
- jnlopnfg
- jnlrput
- jnlstts
- jnlunlfg
- jnlunlfg
- jnlunlfg
- jnlunlfg
- journal block
- journal duplicating facility
- journal editing facility
- journal maintenance facility
- journals
- editing
- integrating file recovery
- recovery journal
- size of
- statistical journal
- synchronization point journal
- user journal
- (K)
- KB meaning
- (L)
- LAN
- component to be used
- maintenance
- maintenance
- maintenance
- monitoring
- that uses client/server processing
- language for message log, specifying
- large-scale computer
- LCK performance verification trace
- LCK performance verification trace information file
- lckrminf
- link
- monitoring
- with DBMS
- load balancing
- among nodes
- with Multiserver facility
- loading opportunity
- local cache
- local memory
- lock monitoring time
- lock on TAM table
- locking
- deadlock
- EX mode
- on DAM file
- PR mode
- releasing
- resource
- specifying whether to wait
- units
- logcat
- logical channel
- logical file
- in DAM file
- in TAM file
- logical filegroup
- in archive journal file
- in checkpoint dump file
- in status file
- in system journal file
- unload check on
- logical message
- logical terminal
- logical terminal name
- (M)
- mainframe
- maintenance LAN
- maintenance LAN
- maintenance LAN
- maximum dispersed files for parallel access
- MB meaning
- MCF
- applications in MHP scheduling
- starting
- MCF application
- MCF application definition
- MCF communication events
- MCF communication process
- MCF communication process
- MCF error events
- MCF events
- MCF message exchange
- MCF message exchange
- configuration of
- configuration using extended presentation facility
- description of
- input queue
- network that can use
- output queue
- overview of
- supported protocols for
- using TCP/IP protocol
- MCF message queue
- MCF message queue
- MCF message queue file
- MCF message queue file
- MCF message queue file
- purpose of
- recovering from error
- structure of
- MCF online tester
- MCF performance verification trace
- MCF system statistics
- MCF trace
- mcfadctap
- mcftdcstv
- mcftdctsg
- mcftdctsg
- mcfthldiq
- mcfthldoq
- mcftrlsiq
- mcfuevt
- memory
- local
- shared
- structure of
- memory queue
- memory queue
- fallback using
- message control
- message control facility
- message exchange
- screen data operations using
- message exchange facility
- message log
- obtaining
- specifying language for output
- suppressing
- message log file
- recovering
- message queue
- message queue access
- message queue file
- message queue interface
- message sequence numbers
- message sequential number
- message-handling program
- message-handling program
- message-storing buffer pool
- messages
- getting
- handing, when OpenTP1 terminates
- hold
- order of sending
- putting
- receiving
- receiving
- sending
- sending
- sending and receiving
- sequence numbers of
- unprocessed
- MHP
- MHP
- MHP
- MHP
- automatic shutdown of scheduling
- client user program
- overview of
- scheduling requests to
- shutdown scheduling for
- starting, by issung UAP function
- starting, by MCF event
- starting, by MCF event
- transaction
- minimum dispersed files for parallel access
- mirrored disk
- modifying
- monitor
- monitored RM definition
- monitoring
- output queue
- status
- temporary closing request
- to detect infinite loop
- TP monitor
- monitoring LAN
- monitoring link
- monitoring path
- monsbystp
- monsbystp
- monswap
- monswap
- MQA message
- getting
- putting
- MQA message queue
- MQA message queue
- queue manager
- transaction processing
- MQA message queue file
- description of
- purpose of
- recovering from error
- MQA message queuing
- queue manager
- mqainit
- MQI
- MSDTC linkage
- multi-homed host
- multi-node area
- multi-node subarea
- multi-scheduler facility
- Multigeneration Guarantee facility
- recovering, when using
- Multinode facility
- available operations
- Global Archive Journal facility
- overview of
- MultiOpenTP1
- commands, distributing
- configuration of
- description of
- using
- multiple instances, using
- Multiserver facility
- balancing load in
- overview of
- process control with
- multiserver facility
- drawback
- (N)
- NAM event trace
- NAM event trace information file
- namdomainsetup
- name service
- namndchg
- network configuration, changing
- network error, recovering from
- network that can use MCF message exchange
- network transparency
- no-wait RPC
- noans-type
- node
- balancing loads among nodes
- containing two OpenTP1 instances
- internode locking
- OpenTP1
- with Global Archive Journal facility
- node management
- node management
- node monitoring facility
- non-automatic connection mode
- non-resident process
- non-response
- normal termination
- number of ports, restricting
- numbered messages, requesting
- (O)
- offline tester
- one-system operation
- for status file
- for system journal file
- of checkpoint dump file
- online
- backing up DAM file
- changing network configuration while
- changing SPP
- online tester
- OpenTP1 administrator
- operation tasks performed by
- tasks for setup
- OpenTP1 file
- protecting
- protecting
- OpenTP1 file system
- assigning
- backing up
- difference from OS file system
- restoring
- selection of files to create
- OpenTP1 instance
- correspondence between IP address and
- OpenTP1 node
- OpenTP1 process, recovering
- OpenTP1 services
- OpenTP1 services
- types of
- OpenTP1 software products
- list of
- OpenTP1 system
- operating
- setting up
- OpenTP1 system definition
- OpenTP1 system service
- OpenTP1 termination mode
- operation
- routine
- with System Switchover facility
- operations by users
- for backing up DAM and TAM
- for changing file capacity
- for modifying definitions
- for outputting message log to file
- for replacing UAP
- for starting OpenTP1
- for starting UAP
- for terminating UAP
- for unloading journal
- ORACLE
- OS file system, difference from OpenTP1 file system
- output function for DAM file
- output queue
- output queue
- description of
- monitoring message in
- outputting
- message log to file
- statistics
- overwrite check
- (P)
- parallel access facility
- for system journal file
- parallel accesses guaranteed, minimum number of
- parallel processing
- of services
- with Multinode facility
- partial recovery
- partial recovery
- partial recovery
- of transaction
- using system journal file
- performance verification trace
- permanent connection
- physical file
- adding, for checkpoint dump file
- in archive journal file
- in checkpoint dump file
- in DAM file
- in MCF message queue file
- in status file
- in system journal file
- in TAM file
- operating with one, in status file
- operating with one, in system journal file
- physical file name
- planned system switchover
- planned termination
- PR lock mode
- prepare processing
- primary system
- priority selection node
- process
- control
- control, example of
- resident and non-resident
- process service event trace
- process service event trace information file
- protecting file system
- protocol product, system connected to
- purpose of
- archive journal file
- checkpoint dump file
- MCF message queue file
- message queue file
- transaction recovery journal file
- server recovery journal file
- status file
- system journal file
- (Q)
- queinit
- queue
- schedule queue for MHP
- schedule queue for SPP
- server that receives request from
- queue file
- dc_mcf_execap()
- queue group
- queue manager
- queue manager
- queue manager
- (R)
- rap-processing client manager
- real-time statistics service
- real-time statistics service
- received message lifetime
- received messages
- receiving message
- record-based lock
- recovering
- archive journal file
- checkpoint dump file
- DAM file
- from deadlock
- from error in transaction recovery journal file
- from inability to start UAP
- from infinite loop
- from network error
- from system failure
- from UAP abnormal termination
- from UAP failure
- from UAP failure
- ISAM file
- MCF message queue file
- message log file
- MQA message queue file
- server recovery journal file
- server recovery journal file
- status file
- system journal file
- TAM file
- transaction partially
- transaction recovery journal file
- using Multigeneration Guarantee facility
- using system journal file
- recovery journal, contents of
- reference-only TAM table
- regular file
- releasing
- lock
- scheduling shutdown by command
- remote API facility
- remote API facility
- remote procedure call
- compressing send data for
- of TP1/Client
- replacing UAP
- reporting
- communication event failure
- server startup to TP1/Client
- requests, setting scheduling priorities for service
- reserved filegroup, opening
- reserved status of
- archive journal file
- status file
- system journal file
- system journal file
- resident process
- resource
- consistency in transaction processing
- locking
- waiting to use
- resource group
- resource group
- resource manager
- resource manager
- resource manager monitor service
- response-type
- restart
- in complete recovery
- restoring
- return
- RI
- RM
- rollback
- rollback
- heuristic
- rolling update
- root transaction branch
- round-robin scheduling
- RPC
- asynchronous-response
- chaining
- compressing data
- no-response
- non-response
- relationship with SPP
- response
- synchronous-response
- used to request service
- using OpenTP1 library
- RPC trace
- RPC TxRPC
- rpcdump
- rpcmrg
- rts
- RTSSPP
- RTSSUP
- (S)
- scale in
- scale out
- scdhold
- scdrles
- scenario
- rolling update
- scale in
- scale out
- scenario template for system operation, using
- schedule buffer group name
- scheduling
- automatic shutdown
- priority for user servers
- queue for MHP
- queue for MHP
- release scheduling shutdown
- requests to MHP
- requests to SPP
- requests to UAP
- setting priority for MHP
- setting priority for SPP
- shutdown for MHP
- shutdown for SPP
- shutdown for SPP
- scheduling facility
- secondary system
- segment
- in logical message
- segment-receiving function
- send data, compressing
- send message lifetime
- sending messages
- sending priority
- server
- scheduling priority for user
- service-providing program
- that receives request from queue
- that receives request from socket
- server recovery journal file
- creating
- purpose of
- recovering from error
- recovering from error in
- server UAP
- service
- executing in parallel
- group in MHP scheduling
- how RPC is used to request
- in MHP scheduling
- requests, setting scheduling priorities for
- service group
- service information prioritizing function
- service information prioritizing function
- notes about using
- service information searches, optional function for
- service recovery
- service request method
- service requests, setting scheduling priority for
- service-group name
- service-providing program
- service-using program
- service-using program
- setting
- OpenTP1 system
- scheduling priorities for service requests
- setup, use, and error recovery, overview of
- SEWB3
- SGW
- client user program
- overview of
- shared memory
- shutdown
- by command
- of scheduling automatically
- of scheduling for MHP
- of scheduling for SPP
- release of
- simple structure table
- single
- physical file in status file
- physical file in system journal file
- single-system operation
- socket, server that receives request from
- software products
- HAmonitor
- ISAM
- Job Management Partner 1
- overview of
- SEWB3
- TP1/Client/P
- TP1/Client/W
- TP1/FS/Direct Access
- TP1/FS/Table Access
- TP1/High Availability
- TP1/LiNK
- TP1/Message Control
- TP1/Message Control/Tester
- TP1/Message Queue
- TP1/Message Queue
- TP1/Message Queue
- TP1/Multi
- TP1/NET/HDLC
- TP1/NET/High Availability
- TP1/NET/HNA-NIF
- TP1/NET/Library
- TP1/NET/OSI-TP
- TP1/NET/TCP/IP
- TP1/NET/X25
- TP1/NET/XMAP3
- TP1/Offline Tester
- TP1/Online Tester
- TP1/Resource Manager Monitor
- TP1/Server Base
- TP1/Shared Table Access
- SPP
- client user program
- overview of
- release scheduling shutdown
- scheduling requests to
- setting scheduling priority
- shutdown scheduling for
- starting, by issung UAP function
- that can use Multiserver facility
- transaction
- standby status of
- archive journal file
- status file
- system journal file
- system journal file
- standby system
- starting, to complete postprocessing of running system
- starting, to replace running system
- starting
- OpenTP1
- OpenTP1 with Multinode facility
- OpenTP1 with System Switchover facility
- recovering from inability to start UAP
- transaction
- UAP
- UAP by issung function
- UAP by MCF event
- UAP by using command
- startup notification facility
- static connection schedule mode
- statistical journal information
- statistical journal, contents of
- statistics output facility
- status
- archived/not archived
- available
- available
- available/current
- available/current
- available/standby
- available/standby
- monitoring output
- of archive journal file
- of OpenTP1 node
- of status file
- of system journal file
- of system journal file
- of system journal file
- of TAM table
- reserved
- unavailable
- unavailable
- status file
- description of
- operating with one physical file in
- purpose of
- recovering from error
- shutdown status of
- status of
- structure of
- swapping
- stbmake
- structure of
- archive journal
- checkpoint dump file
- MCF message queue file
- memory
- processes
- status file
- system journal file
- stsinit
- stsinit
- stsrm
- stub
- SUP
- transaction
- superuser
- suppressing message log
- swappable file
- swapping
- status files
- system journal files
- symbol conventions
- synchronization point
- setting with MHP
- setting with SUP or SPP
- synchronization point journal, contents of
- synchronous communication functions
- receive
- send
- send/receive
- synchronous-response RPC
- synchronous-response RPC
- system configuration using JP1
- system control information
- system definition
- system definition
- editing
- system journal file
- available status of
- available/current status of
- available/standby status of
- checking
- copying
- description of
- operating with one physical file in
- purpose of
- recovering from error
- reserved status of
- status of
- status of
- structure of
- swapping
- unavailable status of
- unloading
- system monitoring using audit logs
- system recovery
- system service
- process
- system service definition
- system switching, procedure for
- System Switchover facility
- System Switchover facility
- monitoring LAN
- monitoring link
- operating with
- overview of
- system-switch system
- (T)
- table-based lock
- TAM
- TAM data file
- TAM file
- compared to DAM file
- creating
- data file
- deadlock in
- deadlock in
- description of
- loading
- online backup for
- recovering from error
- unloading
- TAM table
- TAM table
- access mode for
- internal functioning of
- lock on
- updatable but permits addition and deletion
- updatable but prohibits addition and deletion
- tamadd
- tambkup
- tamcre
- tamcre
- tamdel
- tamfrc
- tamload
- tamrles
- tamrm
- tamunload
- tasks
- for backing up DAM and TAM
- for modifying definition
- for outputting messages log to file
- for replacing UAP
- for routine OpenTP1 operation
- for starting OpenTP1
- for starting UAP
- for terminating UAP
- for unloading journal
- performed by OpenTP1 administrator
- performed by superuser
- TB meaning
- TCP_NODELAY
- TCP/IP
- protocol
- temporary closing
- checking execution status of
- information obtainable using command to check execution status of
- request, monitoring
- terminal entity
- terminating
- modes
- OpenTP1 with Multinode facility
- OpenTP1 with System Switchover facility
- recovering from UAP abnormal termination
- UAP
- termination
- normal
- planned
- testing
- UAP
- with MultiOpenTP1
- TP monitor
- TP1/Client
- facilities that need to be defined
- preparing to request service from
- TP1/Client communication
- TP1/Client/J
- TP1/Client/J
- TP1/Client/P
- TP1/Client/P
- TP1/Client/W
- TP1/Client/W
- TP1/FS/Direct Access
- DAM file
- TP1/FS/Table Access
- TAM file
- TP1/High Availability
- TP1/High Availability
- TP1/LiNK
- TP1/Message Control
- TP1/Message Control
- MCF online tester
- TP1/Message Control/Tester
- TP1/Message Queue
- TP1/Message Queue
- TP1/Message Queue
- TP1/Multi
- TP1/Multi
- TP1/NET/HDLC
- TP1/NET/High Availability
- TP1/NET/High Availability
- TP1/NET/HNA-NIF
- TP1/NET/Library
- TP1/NET/Library
- TP1/NET/OSI-TP
- TP1/NET/TCP/IP
- TP1/NET/X25
- TP1/NET/XMAP3
- TP1/NET/XMAP3
- TP1/Offline Tester
- TP1/Offline Tester
- TP1/Online Tester
- TP1/Online Tester
- TP1/Resource Manager Monitor
- TP1/Resource Manager Monitor
- TP1/Server Base
- service-using program
- TP1/Shared Table Access
- TP1/Shared Table Access
- transaction
- attribute
- attribute
- branch
- branch
- branch, specifying
- commit and rollback
- determining
- determining
- processing in MQA message queuing
- root transaction branch
- TP1/Client
- UAP
- with MHP
- with SPP
- with SUP
- transaction manager
- transaction manager
- transaction manager
- transaction partial recovery
- transaction processing, relation to
- transaction recovery
- transaction recovery journal file
- purpose of
- recovering from error
- recovering from error in
- trigger event
- trigger facility
- trigger monitor application
- trncmt
- trnfgt
- trnlnkrm
- trnlnkrm
- trnls
- trnmkobj
- trnrbk
- trnrmid
- trnstring
- two-phase commit
- tx_begin()
- tx_commit()
- TxRPC communication, creating UAP for
- TxRPC interface
- communication mode
- communication via RPC that uses
- typed buffer
- typed record
- (U)
- UAP
- changing online
- creating, for TxRPC communication
- failure, recovering from
- overview of
- process control
- scheduling
- scheduling
- scheduling request to MHP
- scheduling request to SPP
- starting
- starting application from
- testing and debugging facilities
- that handles offline work
- transactions
- UAP shared library
- UAP trace
- UAP trace
- UAP trace information
- uCosminexus TP1 Connector
- unload check
- restraining
- unload check restraint
- unload journal file
- unload-journals file
- unloading
- archive journal file
- archive journal file
- journal
- system journal file
- TAM file
- unprocessed message, monitoring
- unprocessed receive messages, lifetime for
- unprocessed send message, lifetime for
- unrecoverable DAM file, access to
- unrestricted to database
- update, deferred
- uptime statistics
- uptime statistics
- user application program
- user exit routine for determining application name
- user journal
- contents of
- user server
- assigning scheduling priority
- process
- providing OpenTP1 services
- providing OpenTP1 services
- user service definition
- (V)
- valid guarantee generation
- version number conventions
- (W)
- WAN
- (X)
- X/Open DTP model
- X/Open DTP model
- transaction processing in
- XA interface
- supported by DBMS
- XA resource service, transaction control based on
- XAR performance verification trace
- XAR performance verification trace information file
- XATMI communication service
- XATMI interface
- communication mode
- communication via RPC that uses
- XDM/DCCM3, communication with
- XID
All Rights Reserved. Copyright (C) 2006, 2010, Hitachi, Ltd.