Contents

• Notices

• Summary of amendments

• Preface

• Part 1: Overview

  • 1. Overview of JP1/Base

    • 1.1 Overview of JP1/Base functionality

      • 1.1.1 JP1/Base functionality supported by each OS (in Windows)

      • 1.1.2 JP1/Base functionality supported by each OS (in UNIX)

• Part 2: Functions

  • 2. Details of JP1/Base Functions

    • 2.1 Managing users

      • 2.1.1 Authenticating users

      • 2.1.2 User authentication block

      • 2.1.3 Secondary authentication server

      • 2.1.4 User authentication by linking with a directory server

      • 2.1.5 Mapping users

    • 2.2 Controlling the service start and stop sequences (Windows only)

    • 2.3 Sending and receiving events with the event service

      • 2.3.1 Event service

      • 2.3.2 Event database

      • 2.3.3 JP1 events acquired by JP1/Base

      • 2.3.4 Forwarding JP1 events

    • 2.4 Converting log messages and event log data into JP1 events

      • 2.4.1 Converting application program log files

      • 2.4.2 Prerequisites for a log file trap

      • 2.4.3 Start and end of monitoring with a log file trap

      • 2.4.4 Types of log files that can be monitored

      • 2.4.5 Types of log files that cannot be monitored

      • 2.4.6 The number of log files that can be monitored

      • 2.4.7 Reattempting to monitor a log file when a trap fails

      • 2.4.8 Reattempting to connect to the event service (log file trap)

      • 2.4.9 Converting Windows event logs

      • 2.4.10 Start and end of monitoring in event log trap

      • 2.4.11 Reattempting to connect to an event service (event log trap)

    • 2.5 Suppressing forwarding of large numbers of events

      • 2.5.1 Large numbers of events

      • 2.5.2 Precautions against large numbers of events

      • 2.5.3 Using a manager to suppress event forwarding from an agent with large numbers of JP1 events

      • 2.5.4 Setting a threshold to automatically suppress forwarding of large numbers of events

    • 2.6 Collecting and distributing definitions (JP1/IM only)

      • 2.6.1 Managing definitions by using IM configuration management

      • 2.6.2 Checking information on the operation of services by using IM configuration management

      • 2.6.3 Managing the system's hierarchical configuration by using commands

      • 2.6.4 Collecting and distributing definitions for the event service by using commands

      • 2.6.5 Collecting definitions of JP1 programs

    • 2.7 Detecting a process hangup and abnormal termination

      • 2.7.1 Flow of using the health check function to troubleshoot problems

      • 2.7.2 Problems that can be detected by the health check function

      • 2.7.3 Process monitoring with the health check function

      • 2.7.4 Processes monitored by the health check function

      • 2.7.5 Remote host monitoring with the health check function

    • 2.8 Command execution triggered by a JP1 event

      • 2.8.1 Conditions required for executing local actions

      • 2.8.2 Commands for local actions

      • 2.8.3 Execution status of local actions

      • 2.8.4 Pausing local actions

    • 2.9 Support for system configurations

      • 2.9.1 Using JP1/Base in a cluster system

      • 2.9.2 Using logical hosts in a non-cluster environment

    • 2.10 Communication protocols of JP1/Base

      • 2.10.1 Recommended communication protocol

      • 2.10.2 Changes in communication waiting process between the ANY and the IP binding methods

      • 2.10.3 Checking IP addresses corresponding to host names

      • 2.10.4 Notes on communication protocols of JP1/Base

    • 2.11 Managing JP1/Base as a JP1/Base administrator (UNIX only)

    • 2.12 JP1/Base compatibility

      • 2.12.1 Compatibility between JP1/Base and program products supported by event service functionality

      • 2.12.2 Compatibility and connectivity with previous versions of JP1/Base

• Part 3: Installation and Setup

  • 3. Installation and Setup

    • 3.1 Installation and setup overview

    • 3.2 Installing JP1/Base (in Windows)

      • 3.2.1 Installing JP1/Base

      • 3.2.2 Uninstalling JP1/Base

      • 3.2.3 Notes on installing and uninstalling JP1/Base

    • 3.3 Installing JP1/Base (in UNIX)

      • 3.3.1 Installing JP1/Base

      • 3.3.2 Using the Hitachi Program Product Installer

      • 3.3.3 Uninstalling JP1/Base

      • 3.3.4 Notes on installing and uninstalling JP1/Base

    • 3.4 JP1/Base setup

      • 3.4.1 Setting the language (for Windows)

      • 3.4.2 Setting the language (for UNIX)

      • 3.4.3 Adjusting the kernel parameters (UNIX only)

      • 3.4.4 Extending regular expressions to be used

      • 3.4.5 Setting the password save format

    • 3.5 Backup and recovery

      • 3.5.1 Backup and recovery considerations

      • 3.5.2 Backup and recovery (in Windows)

      • 3.5.3 Backup and recovery (in UNIX)

  • 4. Setup for Handling Possible Errors in JP1/Base

    • 4.1 Setup for handling possible errors in JP1/Base

      • 4.1.1 Range of process errors that can be detected by the health check and process management functions

    • 4.2 Using health check function to detect process errors

      • 4.2.1 Enabling the health check function

      • 4.2.2 Checking the health check settings

      • 4.2.3 Changing the health check settings

      • 4.2.4 Disabling the health check settings

      • 4.2.5 Notes on using the health check function

    • 4.3 Detecting abnormal process termination and authentication server switching

      • 4.3.1 Monitored processes

      • 4.3.2 Triggering of JP1 events

      • 4.3.3 Setup process for detecting abnormal process termination and switching of the authentication server

    • 4.4 Restarting abnormally terminated processes managed by the process management function

      • 4.4.1 Target processes

      • 4.4.2 Setup procedure for restarting processes managed by the process management function

    • 4.5 Restarting an abnormally terminated event service process (UNIX only)

      • 4.5.1 Target processes

      • 4.5.2 Setup procedure for restarting an abnormally terminated event service process

    • 4.6 Setting Hitachi Network Objectplaza Trace Library (HNTRLib2)

    • 4.7 Preparing to collect information when a problem occurs (Windows only)

      • 4.7.1 Setting up user dump output

    • 4.8 Setting a threshold to detect large numbers of events

    • 4.9 Function for automatically re-organizing the command execution log file

  • 5. Setting Up JP1/Base for Use in a Cluster System

    • 5.1 Overview of using JP1/Base in a cluster system

      • 5.1.1 Overview of a cluster system

      • 5.1.2 Overview of using JP1/Base in a cluster system

    • 5.2 Prerequisites for using JP1/Base in a cluster system and the support range

      • 5.2.1 Prerequisites for a logical host environment

      • 5.2.2 Prerequisites for a physical host environment

      • 5.2.3 Specifying a logical host

      • 5.2.4 The scope supported by JP1

    • 5.3  Functions of JP/Base in a cluster system

      • 5.3.1  Cluster operation with the log file trapping function

      • 5.3.2 Cluster operation with the event log trapping function

      • 5.3.3 Cluster operation with the health check function

    • 5.4 Setting up the environment for a cluster system (in Windows)

      • 5.4.1 Required environment settings

      • 5.4.2 Installing JP1/Base

      • 5.4.3 Setup

      • 5.4.4 Registering services in the cluster software

      • 5.4.5 Settings to configure both physical and logical host environments on the same logical host

    • 5.5 Setting up the environment for a cluster system (in UNIX)

      • 5.5.1 Required environment settings

      • 5.5.2 Installing JP1/Base

      • 5.5.3 Setup

      • 5.5.4 Registering daemons in the cluster software

    • 5.6 Follow-up tasks when changing settings in a cluster environment

      • 5.6.1 Operations that result in changes to the common definition information on the primary node and how to apply the settings to the secondary node

    • 5.7 Deleting logical hosts

      • 5.7.1 Deleting logical hosts (in Windows)

      • 5.7.2 Deleting logical hosts (in UNIX)

    • 5.8 Notes on using JP1/Base in a cluster system

      • 5.8.1 Notes on cluster use (common to all OSs)

      • 5.8.2 Notes on cluster use (limited to Windows only)

      • 5.8.3 Notes on cluster use (limited to UNIX only)

    • 5.9 Setting up a logical host in a non-cluster environment

      • 5.9.1 Considerations when using logical hosts in a non-cluster environment

      • 5.9.2 Configuring a logical host in a non-cluster environment

      • 5.9.3 Logical host operation in a non-cluster environment

  • 6. JP1/Base Communication Settings According to Network Configurations

    • 6.1 Using JP1/Base on a single network

    • 6.2 Using JP1/Base on multiple networks

      • 6.2.1 Communication settings when JP1/Base is used on multiple networks

    • 6.3 Setting up JP1/Base communication protocols

      • 6.3.1 Situations where the JP1/Base communication protocol must be changed

      • 6.3.2 Changing the JP1/Base communication protocol

      • 6.3.3 Specifying an ANY binding address

      • 6.3.4 Checking the JP1/Base communication protocol

      • 6.3.5 Setting a duplicate communication protocol using IM configuration management

    • 6.4 Setting JP1-specific hosts information

      • 6.4.1 When JP1-specific hosts information is required

      • 6.4.2 Setting JP1-specific hosts information

      • 6.4.3 Behavior when both jp1hosts information and jp1hosts2 information are defined

      • 6.4.4 Differences between jp1hosts and jp1hosts2 information

      • 6.4.5 Migrating from jp1hosts information to jp1hosts2 information

      • 6.4.6 Checking jp1hosts or jp1hosts2 information

    • 6.5 Using JP1/Base in an environment of distinct networks (with jp1hosts information)

      • 6.5.1 Issues when using JP1/Base in an environment of distinct networks (with jp1hosts information)

      • 6.5.2 Defining jp1hosts information

      • 6.5.3 Changing communication settings of event services

      • 6.5.4 Restarting JP1/Base

      • 6.5.5 Note on transmitting/receiving an event to/from earlier versions of event servers

    • 6.6 Using JP1/Base in an environment of distinct networks (with jp1hosts2 information)

      • 6.6.1 Issues when using JP1/Base in an environment of distinct networks (with jp1hosts2 information)

      • 6.6.2 Defining jp1hosts2 information

      • 6.6.3 Changing communication settings for event services

      • 6.6.4 Restart JP1/Base as needed

      • 6.6.5 Note on transmitting/receiving events to/from earlier event server versions

    • 6.7 An example of communication settings when JP1/Base is not used in a cluster system (in an environment of distinct networks)

      • 6.7.1 Changing communication settings (with jp1hosts information)

      • 6.7.2 Changing communication settings (with jp1hosts2 information)

    • 6.8 An example of communication settings when JP1/Base is used in a cluster system (in an environment of distinct networks)

      • 6.8.1 Changing communication settings (with jp1hosts information)

      • 6.8.2 Changing communication settings (with jp1hosts2 information)

    • 6.9 Communication settings example when JP1/Base is operating within a specific network in an environment with multiple networks

      • 6.9.1 Changing communication settings (with jp1hosts information)

      • 6.9.2 Changing communication settings (with jp1hosts2 information)

    • 6.10 Resetting JP1/Base to a single network after use on multiple networks

      • 6.10.1 Resetting JP1/Base to single network use (with jp1hosts information)

      • 6.10.2 Resetting JP1/Base to single network use (with jp1hosts2 information)

    • 6.11 Using JP1/Base in IPv6 environments

      • 6.11.1 Prerequisites for an IPv6 environment

      • 6.11.2 Communication settings when using JP1/Base in an IPv6 environment

      • 6.11.3 Checking IP addresses

    • 6.12 Situations that require communication settings

      • 6.12.1 Situations that require communication settings for definition files

    • 6.13 Communication encryption in JP1/Base

      • 6.13.1 Files required for SSL communication

      • 6.13.2 Setting up an SSL communication environment on the server side

      • 6.13.3 Setting up an SSL communication environment on the client side

      • 6.13.4 Setting up the communication encryption function of JP1/Base

• Part 4: Installation and Operation

  • 7. Startup and Termination

    • 7.1 Starting and stopping JP1/Base (in Windows)

      • 7.1.1 Starting services

      • 7.1.2 Confirming service startup

      • 7.1.3 Stopping services

    • 7.2 Starting and stopping JP1/Base (in UNIX)

      • 7.2.1 Setting services to start and stop automatically

      • 7.2.2 Confirming JP1/Base startup

  • 8. User Management Setup

    • 8.1 User management setup (in Windows)

      • 8.1.1 Specifying the authentication servers to use

      • 8.1.2 Setting JP1 users (standard users)

      • 8.1.3 Setting JP1 user operating permissions

      • 8.1.4 Copying settings from the primary authentication server

      • 8.1.5 Assigning user permissions to OS users before setting user mapping

      • 8.1.6 Using the GUI to set user mapping

      • 8.1.7 Using commands to set user mapping

      • 8.1.8 Notes on user management setup

    • 8.2 Setup for user authentication linking with the directory server (Windows only)

      • 8.2.1 Settings for the operation to use a linkage user

      • 8.2.2 Settings for the operation to use a DS user

    • 8.3 User management setup (in UNIX)

      • 8.3.1 Specifying the authentication servers to use

      • 8.3.2 Setting JP1 users

      • 8.3.3 Setting JP1 user operating permissions

      • 8.3.4 Copying settings from the primary authentication server

      • 8.3.5 Setting user mapping

      • 8.3.6 Notes on user management setup

    • 8.4 Setup for handling the blocked status (using a secondary authentication server)

      • 8.4.1 Blocked status settings using the GUI (Windows only)

      • 8.4.2 Blocked status settings using commands

  • 9. Setting the Service Start and Stop Sequences (Windows Only)

    • 9.1 Setting the service start and stop sequences

    • 9.2 Editing a start sequence definition file

      • 9.2.1 Setting the service start sequence

      • 9.2.2 Setting the service stop sequence

    • 9.3 Setting the timing for starting services

    • 9.4 Notes on using startup control

  • 10. Setting up an Event Service Environment

    • 10.1 Process for setting up an event service environment

      • 10.1.1 Determining which JP1 events to forward

      • 10.1.2 Determining if forwarding of a large numbers of events are suppressed

      • 10.1.3 Setting up an event service environment

      • 10.1.4 Modifying the event service operating environment

      • 10.1.5 Modifying the settings for forwarding JP1 events

      • 10.1.6 Checking whether the event service is active

      • 10.1.7 Checking the settings for forwarding JP1 events

      • 10.1.8 Using a manager to suppress event forwarding of large numbers of events

      • 10.1.9 Setting a threshold to suppress forwarding of large numbers of events

      • 10.1.10 Setting up an event server in a system that uses DNS services

    • 10.2 Initializing the event database

      • 10.2.1 Initializing an event database while the event service is active

      • 10.2.2 Initializing an event database while the event service is stopped

    • 10.3 Outputting the event database to a CSV file

      • 10.3.1 Output format of a CSV file

      • 10.3.2 Items output to the CSV file

    • 10.4 Notes on using the event service

  • 11. Setting Up the Event Converters

    • 11.1 Converting application program log files

      • 11.1.1 Checking the format of application program log files

      • 11.1.2 Setting up a log file trap

      • 11.1.3 Notes on log file trapping

    • 11.2 Converting Windows event logs

      • 11.2.1 Procedures for setting up event log trapping

      • 11.2.2 Notes on event log trapping

  • 12. Collecting and Distributing Event Service Definitions (JP1/IM Only)

    • 12.1 Communication settings for definition and operation information (linked with IM configuration management)

    • 12.2 Setting the system's hierarchical configuration

      • 12.2.1 Specifying the method for distributing configuration definition information

    • 12.3 Collecting event service definitions

      • 12.3.1 Output format

      • 12.3.2 Collection example

    • 12.4 Distributing event service definitions

  • 13. Setting Local Actions

    • 13.1 Setting a local action

      • 13.1.1 Defining a local action

      • 13.1.2 Changing local action settings

      • 13.1.3 Checking the operating status of a local action

      • 13.1.4 Pausing a local action

    • 13.2 Example of operating a local action

      • 13.2.1 Setting the local action execution definition file

      • 13.2.2 Setting the forwarding settings file

    • 13.3 Notes on local actions

  • 14. Modifying Settings During JP1/Base Operation

    • 14.1 Modifying settings for JP1/Base

      • 14.1.1 When changes take effect

    • 14.2 Modifying settings on a JP1/Base host

      • 14.2.1 Effects and follow-up tasks when changing host names

      • 14.2.2 Effects and follow-up tasks when changing IP addresses

      • 14.2.3 Follow-up tasks when changing the system time

• Part 5: Reference

  • 15. Commands

    • List of commands

    • JP1/Base administrator console (for Windows)

    • cpysvprm (Windows only)

    • hntr2conf

    • hntr2getconf

    • hntr2getname (Windows only)

    • hntr2kill (UNIX only)

    • hntr2mon (UNIX only)

    • hntr2util (UNIX only)

    • hntr2util (Windows only)

    • jbs_killall.cluster (UNIX only)

    • jbs_log.bat (Windows only)

    • jbs_log.sh (UNIX only)

    • jbs_setup_cluster (Windows only)

    • jbs_spmd (UNIX only)

    • jbs_spmd_reload

    • jbs_spmd_status

    • jbs_spmd_stop

    • jbs_start (UNIX only)

    • jbs_start.cluster (UNIX only)

    • jbs_stop (UNIX only)

    • jbs_stop.cluster (UNIX only)

    • jbsacllint

    • jbsaclreload

    • jbsadduser

    • jbsadmin (Windows only)

    • jbsblockadesrv

    • jbscancellcact

    • jbschgds (Windows only)

    • jbschgpasswd

    • jbschkds (Windows only)

    • jbsgetcnf

    • jbsgetopinfo

    • jbsgetumap

    • jbshostsexport

    • jbshosts2export

    • jbshostsimport

    • jbshosts2import

    • jbslistacl

    • jbslistlcact

    • jbslistsrv

    • jbslistuser

    • jbsmkpass (Windows only)

    • jbsmkumap

    • jbsparamdump

    • jbspassmgr (Windows only)

    • jbsrmacl

    • jbsrmumap

    • jbsrmumappass (Windows only)

    • jbsrmuser

    • jbsrt_del

    • jbsrt_distrib

    • jbsrt_get

    • jbsrt_sync

    • jbssetacl

    • jbssetadmingrp (UNIX only)

    • jbssetcnf

    • jbssetumap

    • jbssetupsrv (Windows only)

    • jbssetusrsrv (UNIX only)

    • jbsumappass (Windows only)

    • jbsunblockadesrv

    • jbsunsetcnf

    • jcocmdconv

    • jcocmddef

    • jcocmddel

    • jcocmdlog

    • jcocmdshow

    • jevagtfw

    • jevdbinit

    • jevdbmkrep

    • jevdbswitch

    • jevdef_distrib

    • jevdef_get

    • jeveltreload (Windows only)

    • jevexport

    • jevextreload

    • jevlogdstart (UNIX only)

    • jevfwstat

    • jevlogdstat

    • jevlogdstop (UNIX only)

    • jevlogreload

    • jevlogstart

    • jevlogstart (cluster environment only)

    • jevlogstat

    • jevlogstop

    • jevlogstop (cluster environment only)

    • jevmessageid.bat (Windows only)

    • jevregsvc (Windows only)

    • jevreload

    • jevsend

    • jevsendd

    • jevstart (UNIX only)

    • jevstat

    • jevstop (UNIX only)

    • Jischk

    • Jiscond

    • Jisconv

    • Jiscpy

    • Jisext

    • Jisinfo

    • Jiskeymnt

    • Jisktod

    • Jislckclear (Windows only)

    • Jislckext

    • Jislckfree (Windows only)

    • Jislckreg (UNIX only)

    • Jismlcktr (Windows only)

    • Jisprt

    • Jisrsdel (UNIX only)

    • jp1base_setup (UNIX only)

    • jp1base_setup_cluster (UNIX only)

    • jp1bshasetup (Windows only)

    • jp1ping

    • openssl

  • 16. Definition Files

    • List of definition files

    • Definition files required for each operational case

    • Types of parameters

    • Event filter syntax

    • Start sequence definition file (Windows only)

    • Service startup delay time / timer monitoring period definition file (Windows only)

    • Event server index file

    • Event server settings file

    • Forwarding settings file

    • API settings file

    • Additional extended attribute settings files

    • Action definition file for log file trapping

    • Log-file trap startup definition file

    • Log information definition file

    • Action definition file for event log trapping (Windows only)

    • Distribution definition file

    • Password definition file (Windows only)

    • User permission level file

    • User permission definition file

    • Directory server modification file (Windows only)

    • Directory server linkage definition file (Windows only)

    • User mapping definition file

    • Health check definition file

    • Common definition settings file (health check function)

    • JP1/Base parameter definition file

    • Extended startup process definition file

    • jp1hosts definition file

    • jp1hosts2 definition file

    • Host access control definition file

    • SSL communication definition file

    • Local action environment variable file

    • Local action execution definition file

    • Common definition settings file (local action function)

    • Collection information file

    • Common definition settings file (configuration management functionality)

  • 17. JP1 Events

    • 17.1 JP1 event attributes

      • 17.1.1 Basic attributes

      • 17.1.2 Extended attributes

    • 17.2 List of JP1 events output by JP1/Base

    • 17.3 JP1 event details

      • 17.3.1 JP1 event details by event ID

• Part 6: Troubleshooting

  • 18. Troubleshooting

    • 18.1 Troubleshooting procedure

    • 18.2 Types of log information

      • 18.2.1 Common message log information

      • 18.2.2 Integrated trace log information

      • 18.2.3 Log information of each process

      • 18.2.4 Operation log

      • 18.2.5 Log files and directories

    • 18.3 Data that must be collected when a problem occurs

      • 18.3.1 Data that must be collected when a problem occurs (in Windows)

      • 18.3.2 Data that must be collected when a problem occurs (in UNIX)

    • 18.4 How to collect data

      • 18.4.1 How to collect data (in Windows)

      • 18.4.2 How to collect data (in UNIX)

    • 18.5 Troubleshooting different types of problems

      • 18.5.1 Problems in Windows or UNIX

      • 18.5.2 Problems in Windows

      • 18.5.3 Problems in UNIX

      • 18.5.4 Errors detected by the health check function

    • 18.6 Notes on using JP1/Base

      • 18.6.1 Notes on starting the system

      • 18.6.2 Notes on starting the system operation

      • 18.6.3 Notes on user authentication

      • 18.6.4 Notes on controlling the start sequence

      • 18.6.5 Notes on the files and directories used by JP1/Base

• Appendixes

  • A. List of Files and Directories

    • A.1 List of files and directories (in Windows)

    • A.2 List of files and directories (in UNIX)

  • B. List of Processes

    • B.1 List of processes (in Windows)

    • B.2 List of processes (in UNIX)

  • C. List of Port Numbers

    • C.1 Port numbers for JP1/Base

    • C.2 Direction in which data passes through the firewall

    • C.3 Connection status

  • D. List of Limits

  • E. Performance and Estimation

    • E.1 Memory requirements

    • E.2 Disk space requirements (in Windows)

    • E.3 Disk space requirements (in UNIX)

    • E.4 Disk space requirements for the shared disk in a cluster system

  • F. Syntax of Regular Expressions

    • F.1 Regular expressions that can be used by default

    • F.2 Extended regular expressions that can be used when regular expressions are extended

    • F.3 Comparison among regular expressions that can be used

    • F.4 Tips on using regular expressions

    • F.5 Examples of using regular expressions

  • G. List of Kernel Parameters

  • H. Handling Changes in Communication Settings

    • H.1 Changing the settings in the jp1hosts2 definition file

    • H.2 Changing the settings in the jp1hosts definition file

    • H.3 Changing the settings in the communication protocol settings files

    • H.4 Changing the settings for the ports parameter in the event server settings file (conf)

    • H.5 Changing the settings for the client-bind parameter in the event server settings file (conf)

    • H.6 Changing the settings for the remote-server parameter in the event server settings file (conf)

    • H.7 Changing the settings for the server parameter in the API settings file (api)

    • H.8 Changing the settings for the client parameter in the API settings file (api)

    • H.9 Functionality supported in communication settings

    • H.10 Parameters defined in the communication protocol settings file

    • H.11 Differences between communication protocols of JP1/Base 06-51 or earlier and JP1/Base 06-71 or later

    • H.12 Communication protocols in a cluster setup

  • I. Converting SNMP Traps

    • I.1 Using the SNMP trap converter to convert SNMP traps into events

    • I.2 Setting the SNMP trap converter

    • I.3 SNMP trap conversion command syntax

    • I.4 Definition files for SNMP trap conversion

    • I.5 JP1 events for SNMP trap conversion

  • J. Linking with Products That Use JP1/SES Events

    • J.1 Settings for individual products that use JP1/SES events

    • J.2 Settings in common for products that use JP1/SES events

    • J.3 Notes on using JP1/SES events

    • J.4 Converting JP1/SES events into JP1 events

  • K. Operation Log Output

    • K.1 Types of events recorded in the operation log

    • K.2 Storage format of operation log output

    • K.3 Operation log output format

    • K.4 Trigger conditions for operation log output

    • K.5 Settings for outputting operation logs

    • K.6 Operation log messages

  • L. Operating JP1/Base as a JP1/Base Administrator (UNIX Only)

    • L.1 Division of roles when operating JP1/Base

    • L.2 Setting up an environment in which JP1/Base administrators can use JP1/Base

    • L.3 Setting up an environment for JP1/Base administrators on a logical host

  • M. Operating a secure system

    • M.1 Prerequisites for a secure system

    • M.2 Restricting connections from unintended hosts

    • M.3 Definition for restricting connections from unintended hosts

    • M.4 Procedure for restricting connections from unintended hosts

    • M.5 Messages that are output when a request was denied by connection restriction

  • N. Using JP1/Base linked with the auto-scaling functionality

    • N.1 System configuration for using JP1/Base linked with the auto-scaling functionality

    • N.2 Prerequisites for using JP1/Base linked with the auto-scaling functionality

    • N.3 Adding hosts to the monitoring target during scale out

    • N.4 Terminating monitoring during scale in

    • N.5 Setup procedure for using JP1/Base linked with the auto-scaling functionality (for the manager host)

    • N.6 Setup procedure for using JP1/Base linked with the auto-scaling functionality (for agent hosts)

    • N.7 Configuring the Amazon EC2 service

    • N.8 Auto-scaling linkage script

    • N.9 Processing time required for configuring and clearing monitoring settings

    • N.10 Notes about using JP1/Base linked with the auto-scaling functionality

  • O. Version Changes

    • O.1 Changes in 11-50

    • O.2 Changes in 11-10

    • O.3 Changes in 11-00

    • O.4 Changes in 10-50

    • O.5 Changes in 10-10

    • O.6 Changes in 10-00

    • O.7 Changes in 09-00

    • O.8 Changes in 08-00

  • P. Reference Material for this Manual

    • P.1 Related publications

    • P.2 Abbreviations

    • P.3 Acronyms

    • P.4 Conventions for KB (kilobytes) and other units

  • Q. Glossary

• Index

To Page Top