Contents

• Notices

• Summary of amendments

• Preface

• 1. Overview of Service Templates

  • 1.1 Types of service templates and plug-ins

  • 1.2 Interpreting the service template reference

  • 1.3 Interpreting the plug-in reference

  • 1.4 Notes common to service templates

• 2. JP1/AO Standard-package Service Templates

  • 2.1 List of JP1/AO standard-package service templates

  • 2.2 Usage examples of service templates for operation and monitoring

    • 2.2.1 Usage example of Add monitoring setting service template

    • 2.2.2 Usage example of Add operational user service template

    • 2.2.3 Usage example of Batch change of operation users service template

  • 2.3 System configuration of JP1/AO standard-package templates

    • 2.3.1 System configuration of Add monitoring setting service template

    • 2.3.2 System configuration of Delete monitoring setting service template

    • 2.3.3 System configuration of Add operational user service template

    • 2.3.4 System configuration of Change operational user service template

    • 2.3.5 System configuration of Delete operational user service template

  • 2.4 Service Template in JP1_Operations/Configuration Category

    • 2.4.1 Add monitoring setting

    • 2.4.2 Add monitoring setting (repeated flow)

    • 2.4.3 Delete monitoring setting

    • 2.4.4 Delete monitoring setting (repeated flow)

    • 2.4.5 Add JP1/Base monitoring settings

    • 2.4.6 Add JP1/Base monitoring setting (repeated flow)

    • 2.4.7 Adding of a node to be monitored by JP1/Cm2

    • 2.4.8 Adding of nodes to be monitored by JP1/Cm2 (repeated flow)

    • 2.4.9 Deletion of nodes monitored by JP1/Cm2

    • 2.4.10 Deletion of nodes monitored by JP1/Cm2 (repeated flow)

    • 2.4.11 Replicating a JP1/PFM alarm definition

  • 2.5 Service Template in JP1_Operations/Management Category

    • 2.5.1 Add operational user

    • 2.5.2 Change operational user

    • 2.5.3 Delete operational user

    • 2.5.4 Register JP1/AJS jobnet for execution

    • 2.5.5 Get JP1 events

    • 2.5.6 Get list of JP1/PFM monitoring targets

    • 2.5.7 Get list of JP1/PFM alarm information

    • 2.5.8 Get list of JP1/PFM process monitoring settings

    • 2.5.9 Get list of JP1 users

    • 2.5.10 Get JP1 user mapping definition

    • 2.5.11 JP1/AJS jobnet planned execution registration

    • 2.5.12 JP1/AJS jobnet scheduled execution results output

    • 2.5.13 Obtain JP1/CM2 monitored node list

    • 2.5.14 Batch change of operation users

    • 2.5.15 Batch change of operation users (repeated flow 1)

    • 2.5.16 Batch change of operation users (repeated flow 2)

    • 2.5.17 JP1/AJS root jobnet migration

    • 2.5.18 JP1/AJS root jobnet migration (repeated flow)

    • 2.5.19 JP1/AJS root jobnet deletion

    • 2.5.20 JP1/AJS root jobnet deletion (repeated flow)

    • 2.5.21 Register a JP1/IM-SS Item

    • 2.5.22 Update JP1/IM-SS Item information

  • 2.6 Service Template in JP1_Operations/Reports Category

    • 2.6.1 Get JP1/PFM report

  • 2.7 Service Template in JP1_Operations/Troubleshoot Category

    • 2.7.1 Get JP1/AJS and JP1/Base logs

    • 2.7.2 Get JP1/IM and JP1/Base logs

    • 2.7.3 Registration of the JP1 event

    • 2.7.4 Changing of the JP1 event action status

  • 2.8 Service Template in OS_Operations/Basic Category

    • 2.8.1 Execute remote command

  • 2.9 Service Template in OS_Operations/Management Category

    • 2.9.1 Get list of OS users

    • 2.9.2 Get lists of OS users by batch

    • 2.9.3 Get list of OS users by batch (repeated flow)

  • 2.10 Service Template in Utility_Components Category

    • 2.10.1 Utility Components

• 3. JP1/AO Content Set Service Templates

  • 3.1 List of JP1/AO Content Set service templates

  • 3.2 Usage examples of service templates relating to virtual servers

    • 3.2.1 Usage example of Add virtual server (LU creation and data store creation) service template

    • 3.2.2 Usage example of Migrate virtual server service template

  • 3.3 System configurations for JP1/AO Content Set service templates

    • 3.3.1 System configuration of Add virtual server (LU creation and data store creation)

    • 3.3.2 System configuration of Add virtual server (deploy/OS initial settings)

    • 3.3.3 System configuration of Add virtual server (virtual disk)

    • 3.3.4 System configuration of Delete virtual server

    • 3.3.5 System configuration of Delete virtual server (virtual disk)

    • 3.3.6 System configuration of Delete virtual server (delete data store and LU)

    • 3.3.7 System configuration of Change virtual server specifications (CPU and memory)

    • 3.3.8 System configuration of Virtual server snapshot

    • 3.3.9 System configuration of Start virtual server

    • 3.3.10 System configuration of Stop virtual server

    • 3.3.11 System configuration of Restart virtual server

    • 3.3.12 System configuration of Migrate virtual server

    • 3.3.13 System configuration of Check env. for adding virtual servers (LU/data store creation)

    • 3.3.14 System configuration of Check env. for adding virtual servers (deployment/OS init.)

    • 3.3.15 System configuration of Get list of virtual server information

    • 3.3.16 System configuration of Get list of storage information

    • 3.3.17 System configuration of Creating a virtual server clone

    • 3.3.18 System configuration of Deletion of a virtual server clone

  • 3.4 Service Template in OS_Operations/Configuration Category

    • 3.4.1 Windows update program installation

    • 3.4.2 Windows update program installation (repeated flow)

  • 3.5 Service Template in VM_Operations/Configuration/HyperV/2008 Category

    • 3.5.1 Add a virtual server (deploy/OS initial settings)

    • 3.5.2 Add a virtual server (virtual disk)

    • 3.5.3 Delete a virtual server

  • 3.6 Service Template in VM_Operations/Configuration/HyperV/2012 Category

    • 3.6.1 Add a virtual server (deploy/OS initial settings)

    • 3.6.2 Change virtual server specifications (CPU and memory)

    • 3.6.3 Delete virtual server

    • 3.6.4 Add virtual server (virtual disk)

  • 3.7 Service Template in VM_Operations/Configuration/OpenStack Category

    • 3.7.1 Addition of a virtual server (deployment/OS initial setup)

    • 3.7.2 Add virtual server (virtual disk)

  • 3.8 Service Template in VM_Operations/Configuration/vSphere Category

    • 3.8.1 Add virtual server (LU creation and data store creation)

    • 3.8.2 Add virtual server (deploy/OS initial settings)

    • 3.8.3 Add virtual server (virtual disk)

    • 3.8.4 Add virtual server (virtual disk) (repeated flow)

    • 3.8.5 Delete virtual server

    • 3.8.6 Delete virtual server (virtual disk)

    • 3.8.7 Delete virtual server (delete data store and LU)

    • 3.8.8 Change virtual server specifications (CPU and memory)

    • 3.8.9 Virtual server snapshot

  • 3.9 Service Template in VM_Operations/Management Category

    • 3.9.1 Start virtual server

    • 3.9.2 Start virtual server (repeated flow)

    • 3.9.3 Stop virtual server

    • 3.9.4 Stop virtual server (repeated flow)

    • 3.9.5 Restart virtual server

    • 3.9.6 Restart virtual server (repeated flow)

    • 3.9.7 Migrate virtual server

    • 3.9.8 Migrate virtual server (repeated flow)

    • 3.9.9 Check env. for adding virtual servers (LU/data store creation)

    • 3.9.10 Check env. for adding virtual servers (deployment/OS init.)

    • 3.9.11 Get list of virtual server information

    • 3.9.12 Get list of storage information

    • 3.9.13 Creating a virtual server clone

    • 3.9.14 Deletion of a virtual server clone

  • 3.10 Service Template in VM_Operations/Management/HyperV/2008 Category

    • 3.10.1 Start virtual servers

    • 3.10.2 Start the virtual server (repeated flow)

    • 3.10.3 Stop the virtual server

    • 3.10.4 Stop the virtual server (repeated flow)

    • 3.10.5 Restart virtual servers

    • 3.10.6 Restart a virtual server (repeated flow)

    • 3.10.7 Obtain the virtual server information list

  • 3.11 Service Template in VM_Operations/Management/HyperV/2012 Category

    • 3.11.1 Start virtual server

    • 3.11.2 Start virtual server (repeated flow)

    • 3.11.3 Stop virtual server

    • 3.11.4 Stop virtual server (repeated flow)

    • 3.11.5 Restart virtual server

    • 3.11.6 Restart virtual server (repeated flow)

    • 3.11.7 Obtain virtual server information list

  • 3.12 Service Template in VM_Operations/Management/OpenStack Category

    • 3.12.1 Start virtual server

    • 3.12.2 Start virtual server (repeated flow)

    • 3.12.3 Back up volumes

• 4. JP1/AO Standard-package Plug-ins

  • 4.1 List of basic plug-ins

  • 4.2 Plug-ins in Hitachi/Basic category

    • 4.2.1 General command plug-in

    • 4.2.2 File-forwarding plug-in

    • 4.2.3 Repeated execution plug-in

    • 4.2.4 Email notification plug-in

    • 4.2.5 User-response wait plug-in

    • 4.2.6 Standard output plug-in

    • 4.2.7 Terminal connect plug-in

    • 4.2.8 Terminal command plug-in

    • 4.2.9 Terminal disconnect plug-in

    • 4.2.10 Flow plug-in

    • 4.2.11 Interval plug-in

    • 4.2.12 Judge returncode plug-in

    • 4.2.13 Test value plug-in

    • 4.2.14 Abnormal-end plug-in

    • 4.2.15 Judge value plug-in

  • 4.3 List of plug-ins in the JP1/AO Content Set

  • 4.4 Plug-in in JP1/AJS Category

    • 4.4.1 Get JP1/AJS troubleshooting information

    • 4.4.2 Register JP1/AJS jobnet for execution

    • 4.4.3 Get JP1/AJS jobnet execution results

    • 4.4.4 Register for JP1/AJS jobnet planned execution

    • 4.4.5 Register for JP1/AJS jobnet fixed execution

    • 4.4.6 JP1/AJS jobnet scheduled execution results output

  • 4.5 Plug-in in JP1/Base Category

    • 4.5.1 Add JP1 user

    • 4.5.2 Set JP1/Base permissions

    • 4.5.3 Delete JP1 user permissions

    • 4.5.4 Delete JP1 user

    • 4.5.5 Add JP1/Base user mapping

    • 4.5.6 Delete JP1/Base user mapping

    • 4.5.7 Change password management information in JP1/Base

    • 4.5.8 Delete OS user information

    • 4.5.9 Change JP1 user password

    • 4.5.10 Get JP1/Base troubleshooting information

    • 4.5.11 Get list of JP1 users

    • 4.5.12 Check mapping information

    • 4.5.13 Registration of a JP1 event

    • 4.5.14 JP1/Base common definition information setting

  • 4.6 Plug-in in JP1/Cm2 Category

    • 4.6.1 Add monitored node

    • 4.6.2 Delete monitored node

    • 4.6.3 Output of the NNMi topology database content

  • 4.7 Plug-in in JP1/IM Category

    • 4.7.1 Collect JP1/IM troubleshooting information

    • 4.7.2 Get JP1 event

    • 4.7.3 Changing the JP1 event action status

  • 4.8 Plug-in in JP1/IM-SS Category

    • 4.8.1 Register JP1/IM-SS Instance

    • 4.8.2 Update JP1/IM-SS Instance

  • 4.9 Plug-in in JP1/PFM Category

    • 4.9.1 Add monitoring target (JP1/PFM - RM)

    • 4.9.2 Delete monitoring target (JP1/PFM - RM)

    • 4.9.3 Add monitoring setting

    • 4.9.4 Bind alarm (JP1/PFM - RM)

    • 4.9.5 Unbind alarm (JP1/PFM - RM)

    • 4.9.6 Add process monitoring settings

    • 4.9.7 Set Store database storage conditions

    • 4.9.8 Set agent hierarchy

    • 4.9.9 Synchronize service information

    • 4.9.10 Display monitoring targets (JP1/PFM - RM)

    • 4.9.11 Get list of alarm table names (JP1/PFM - RM)

    • 4.9.12 Get list of process monitoring settings

    • 4.9.13 Get report

    • 4.9.14 Acquire alarm table information (JP1/PFM)

    • 4.9.15 Delete alarm table (JP1/PFM)

    • 4.9.16 Copy alarm table (JP1/PFM)

    • 4.9.17 Export alarm definition file (JP1/PFM)

    • 4.9.18 Import alarm definition file (JP1/PFM)

  • 4.10 Plug-in in OperatingSystem/Common/Basic Category

    • 4.10.1 Get host name

    • 4.10.2 Delete OS user

    • 4.10.3 Change password for OS user

    • 4.10.4 Create folder

    • 4.10.5 Delete folder

    • 4.10.6 Delete file

    • 4.10.7 Copy file

    • 4.10.8 Output OS type

    • 4.10.9 Get list of OS users

    • 4.10.10 Replace character string

    • 4.10.11 Filter Text

    • 4.10.12 Search Text

    • 4.10.13 Operate OS Service

    • 4.10.14 Shutdown Server

    • 4.10.15 Restart Server

  • 4.11 Plug-in in OperatingSystem/Linux/Basic Category

    • 4.11.1 Add OS user (Linux)

  • 4.12 Plug-in in OperatingSystem/Windows/Basic Category

    • 4.12.1 Configure Windows firewall

    • 4.12.2 Add OS user (Windows)

    • 4.12.3 Set group of OS user (Windows)

    • 4.12.4 Get CSV data

    • 4.12.5 Acquisition of column data from a CSV/Excel file

    • 4.12.6 Acquisition of row data from a CSV/Excel file

  • 4.13 Plug-in in OperatingSystem/Windows/Database/32bit Category

    • 4.13.1 Execute SQL Query

• 5. JP1/AO Content Set Plug-ins

  • 5.1 List of JP1/AO Content Set plug-ins

  • 5.2 Plug-in in HCS/HDvM Category

    • 5.2.1 Create DP volume

    • 5.2.2 Delete DP volume

    • 5.2.3 Register LU in host group

    • 5.2.4 Delete LU from host group

    • 5.2.5 Check HDvM connectivity

    • 5.2.6 Check LU creation

    • 5.2.7 Get storage information list

  • 5.3 Plug-in in OperatingSystem/Common/Basic Category

    • 5.3.1 Set static route

  • 5.4 Plug-in in OperatingSystem/Linux/Basic Category

    • 5.4.1 Initial OS settings (Linux)

  • 5.5 Plug-in in OperatingSystem/Windows/Basic Category

    • 5.5.1 Send ICMP echo request message

    • 5.5.2 Send ICMP echo request message (confirm no response)

    • 5.5.3 Obtain the MAC address of an NIC

    • 5.5.4 Windows network settings

    • 5.5.5 Install the Windows updates

    • 5.5.6 Execution Wait

  • 5.6 Plug-in in VirtualMachine/HyperV/2008 Category

    • 5.6.1 Obtain the virtual server status

    • 5.6.2 Start a virtual server

    • 5.6.3 Shut down a virtual server

    • 5.6.4 Obtain the IP address of a virtual server

    • 5.6.5 Add a disk to the virtual server

    • 5.6.6 Create a virtual server

    • 5.6.7 Delete a virtual server

    • 5.6.8 Create a response file

    • 5.6.9 Mount a virtual disk

    • 5.6.10 Unmount a virtual disk

    • 5.6.11 Virtual server virtual switch settings

    • 5.6.12 Obtain a virtual server information list

  • 5.7 Plug-in in VirtualMachine/HyperV/2012 Category

    • 5.7.1 Create a virtual server

    • 5.7.2 Virtual server virtual switch settings

    • 5.7.3 Create a response file

    • 5.7.4 Mount a virtual disk

    • 5.7.5 Unmount a virtual disk

    • 5.7.6 Start a virtual server

    • 5.7.7 Shut down a virtual server

    • 5.7.8 Obtain Status of Virtual Server

    • 5.7.9 Obtain IP Address of Virtual Server

    • 5.7.10 Change CPU Settings of Virtual Server

    • 5.7.11 Change Memory Settings of Virtual Server

    • 5.7.12 Delete Virtual Servers

    • 5.7.13 Obtain the virtual server information list

    • 5.7.14 Create Virtual Disk

    • 5.7.15 Connect Virtual Disk

  • 5.8 Plug-in in VirtualMachine/Openstack Category

    • 5.8.1 Create a virtual server

    • 5.8.2 Create Volume

    • 5.8.3 Connect Volume

    • 5.8.4 Obtain Status of Virtual Server

    • 5.8.5 Activate Virtual Server

    • 5.8.6 Obtain IP Address of Virtual Server

    • 5.8.7 Create Temporary Volume

    • 5.8.8 Backup Volume

    • 5.8.9 Delete Volume

  • 5.9 Plug-in in VirtualMachine/vSphere Category

    • 5.9.1 Get power status of virtual server

    • 5.9.2 Start virtual server

    • 5.9.3 Shut down virtual server

    • 5.9.4 Get virtual server IP address

    • 5.9.5 Set virtual server resources

    • 5.9.6 Migrate virtual server

    • 5.9.7 Recognize LUN

    • 5.9.8 Create data store

    • 5.9.9 Delete data store

    • 5.9.10 Set FC path priority

    • 5.9.11 Add virtual disk to virtual server

    • 5.9.12 Delete virtual disk

    • 5.9.13 Get canonical name of SCSI LUN

    • 5.9.14 Create virtual server

    • 5.9.15 Delete virtual server

    • 5.9.16 Set OS init. settings and IP addr. of virtual servers (Windows)

    • 5.9.17 Set OS init. settings and IP addr. of virtual servers (Linux)

    • 5.9.18 Change virtual machine port group

    • 5.9.19 Check data store creation

    • 5.9.20 Check virtual server creation

    • 5.9.21 Check VMware vCenter Server connectivity

    • 5.9.22 Get list of virtual server information

    • 5.9.23 Creating a virtual server snapshot

    • 5.9.24 Moving a virtual server snapshot

    • 5.9.25 Deletion of a virtual server snapshot

    • 5.9.26 Creating a virtual server clone

    • 5.9.27 Deletion of a virtual server clone

    • 5.9.28 Resource configuration setting of the virtual server

    • 5.9.29 Pre-evaluation of resource changes in virtual server

    • 5.9.30 Pre-eval. of resource configuration changes in virtual server

• Appendix

  • A. Reference Information

    • A.1 Functional differences between basic plug-ins by version

    • A.2 Functional differences between content plug-ins by version

    • A.3 List of protocols used by each plug-in

    • A.4 List of statuses of virtual servers managed by Hyper-V

    • A.5 Prerequisites for executing command lines containing non-ASCII characters in UNIX

    • A.6 Version changes

• Index

To Page Top