Job Management Partner 1/Performance Management - Agent Option for Platform Description, User's Guide and Reference

Event Log(System)

Overview

The Event Log(System) alarm monitors MSCS errors and warnings output to the event log.

Note that you can use the collection data addition utility to specify the event logs as the target for data collection. For details about the settings required for using the collection data addition utility to collect event log data, see 3.2.3 Settings for collecting event log information.

Reference note

This alarm terminates alarm evaluation when at least one abnormal or warning value is detected. Accordingly, not all collected data is evaluated. Because each log in the event log has specific information that is not related to previous evaluation, we recommend that all collected data be evaluated.

To evaluate all data, copy this alarm and create an alarm with Enable alarm, Always notify, and Evaluate all data selected in the PFM - Web Console alarm properties. Then use this alarm to perform monitoring.

Primary settings

PFM - Web Console alarm property
Settings

Item Detailed item

Basic information Report alarm when the following damping condition is reached. Yes

interval(s) 1

occurrence(s) during 1

Action SNMP Error, Warning, Normal

Condition expression 1 Record Event Log (PD_ELOG)

Field Log Name

Error condition Log Name = System

Warning condition Log Name = System

Condition expression 2 Record Event Log (PD_ELOG)

Field Event Type Name

Error condition Event Type Name = Error

Warning condition Event Type Name = Warning

Condition expression 3 Record Event Log (PD_ELOG)

Field Source Name

Error condition Source Name = ClusSvc

Warning condition Source Name = ClusSvc

Condition expression 4 Record Event Log (PD_ELOG)

Field Event ID

Error condition Event ID <> 0

Warning condition Event ID <> 0

Condition expression 5 Record Event Log (PD_ELOG)

Field Description

Error condition Description <> dummy^#

Warning condition Description <> dummy^#

#

Set the description of the event log. The value used in the table shows an example of setting a condition value that satisfies the Description field.

PFM - Web Console alarm property	Settings
Item	Detailed item
Basic information	Report alarm when the following damping condition is reached.	Yes
interval(s)	1
occurrence(s) during	1
Action	SNMP	Error, Warning, Normal
Condition expression 1	Record	Event Log (PD_ELOG)
Field	Log Name
Error condition	Log Name = System
Warning condition	Log Name = System
Condition expression 2	Record	Event Log (PD_ELOG)
Field	Event Type Name
Error condition	Event Type Name = Error
Warning condition	Event Type Name = Warning
Condition expression 3	Record	Event Log (PD_ELOG)
Field	Source Name
Error condition	Source Name = ClusSvc
Warning condition	Source Name = ClusSvc
Condition expression 4	Record	Event Log (PD_ELOG)
Field	Event ID
Error condition	Event ID <> 0
Warning condition	Event ID <> 0
Condition expression 5	Record	Event Log (PD_ELOG)
Field	Description
Error condition	Description <> dummy^#
Warning condition	Description <> dummy^#

Alarm table

PFM Windows Template Alarms [LOG] 09.00

Related reports

None

[Contents][Back][Next]

[Trademarks]