Job Management Partner 1/Performance Management - Agent Option for Platform Description, User's Guide and Reference
Overview
The Event Log(all) alarm monitors all errors and warnings output to the event log. Note that you can use the collection data addition utility to specify the event logs as the target for data collection. For details about the settings required for using the collection data addition utility to collect event log data, see 3.2.3 Settings for collecting event log information.
- Reference note
- This alarm terminates alarm evaluation when at least one abnormal or warning value is detected. Accordingly, not all collected data is evaluated. Because each log in the event log has specific information that is not related to previous evaluation, we recommend that all collected data be evaluated.
- To evaluate all data, copy this alarm and create an alarm with Enable alarm, Always notify, and Evaluate all data selected in the PFM - Web Console alarm properties. Then use this alarm to perform monitoring.
Primary settings
PFM - Web Console alarm property
SettingsItem Detailed item Basic information Report alarm when the following damping condition is reached. Yes interval(s) 1 occurrence(s) during 1 Action SNMP Error, Warning, Normal Condition expression 1 Record Event Log (PD_ELOG) Field Log Name Error condition Log Name <> dummy#1 Warning condition Log Name <> dummy#1 Condition expression 2 Record Event Log (PD_ELOG) Field Event Type Name Error condition Event Type Name = Error Warning condition Event Type Name = Warning Condition expression 3 Record Event Log (PD_ELOG) Field Source Name Error condition Source Name <> dummy#2 Warning condition Source Name <> dummy#2 Condition expression 4 Record Event Log (PD_ELOG) Field Event ID Error condition Event ID <> 0 Warning condition Event ID <> 0 Condition expression 5 Record Event Log (PD_ELOG) Field Description Error condition Description <> dummy#3 Warning condition Description <> dummy#3
- #1
- Set the type of event log to be monitored. The value used in the table shows an example of setting a condition value satisfies the Log Name field.
- #2
- Set the name of the source for which entries were generated. The value used in the table shows an example of setting a condition value that satisfies the Source Name field.
- #3
- Set the description of the event log. The value used in the table shows an example of setting a condition value that satisfies the Description field.
Alarm table
PFM Windows Template Alarms [LOG] 09.00
Related reports
None
All Rights Reserved. Copyright (C) 2009, Hitachi, Ltd.