Contents

• Notices

• Summary of amendments

• Preface

• 1. Overview of Service Templates

  • 1.1 Types of service templates and plug-ins

  • 1.2 Interpreting the service template reference

  • 1.3 Interpreting the plug-in reference

  • 1.4 Notes common to service templates

• 2. JP1/AO Standard-package Service Templates

  • 2.1 List of JP1/AO standard-package service templates

    • 2.1.1 List of the service templates used for JP1 (configuration)

    • 2.1.2 List of the service templates used for JP1 (operation)

    • 2.1.3 List of the service templates used for JP1 (reporting)

    • 2.1.4 List of the service templates used for JP1 (troubleshooting)

    • 2.1.5 List of the service templates used for OS (generic processing)

    • 2.1.6 List of the service templates used for OS (configuration)

    • 2.1.7 List of the service templates used for OS (operation)

    • 2.1.8 List of the service templates used for providing Plug-ins

  • 2.2 Usage examples of service templates for operation and monitoring

    • 2.2.1 Usage example of Add monitoring setting service template

    • 2.2.2 Usage example of Add operational user service template

    • 2.2.3 Usage example of Batch change of operation users service template

  • 2.3 System configuration of JP1/AO standard-package templates

    • 2.3.1 System configuration of Add monitoring setting service template

    • 2.3.2 System configuration of Delete monitoring setting service template

    • 2.3.3 System configuration of Add operational user service template

    • 2.3.4 System configuration of Change operational user service template

    • 2.3.5 System configuration of Delete operational user service template

  • 2.4 Service templates for JP1 (configuration)

    • 2.4.1 Add JP1/Base monitoring settings

    • 2.4.2 Add JP1/Base monitoring setting (repeated flow)

    • 2.4.3 Deletion of nodes monitored by JP1/Cm2

    • 2.4.4 Deletion of nodes monitored by JP1/Cm2 (repeated flow)

    • 2.4.5 Adding of a node to be monitored by JP1/Cm2

    • 2.4.6 Adding of nodes to be monitored by JP1/Cm2 (repeated flow)

    • 2.4.7 Replicating a JP1/PFM alarm definition

    • 2.4.8 Create JP1/VERITAS Backup Policy

    • 2.4.9 Delete monitoring setting

    • 2.4.10 Delete monitoring setting (repeated flow)

    • 2.4.11 Add monitoring setting

    • 2.4.12 Add monitoring setting (repeated flow)

  • 2.5 Service templates for JP1 (operation)

    • 2.5.1 Register JP1/AJS jobnet for execution

    • 2.5.2 JP1/AJS jobnet planned execution registration

    • 2.5.3 JP1/AJS jobnet scheduled execution results output

    • 2.5.4 JP1/AJS root jobnet migration

    • 2.5.5 JP1/AJS root jobnet migration (repeated flow)

    • 2.5.6 JP1/AJS root jobnet deletion

    • 2.5.7 JP1/AJS root jobnet deletion (repeated flow)

    • 2.5.8 Obtain JP1/CM2 monitored node list

    • 2.5.9 Update JP1/IM-SS Item information

    • 2.5.10 Register a JP1/IM-SS Item

    • 2.5.11 Get list of JP1/PFM monitoring targets

    • 2.5.12 Get list of JP1/PFM alarm information

    • 2.5.13 Get list of JP1/PFM process monitoring settings

    • 2.5.14 Execution of instant recovery of JP1/VERITAS

    • 2.5.15 End of instant recovery of JP1/VERITAS

    • 2.5.16 Perform JP1/VERITAS backup

    • 2.5.17 Virtual-machine restoration with JP1/VERITAS

    • 2.5.18 Get JP1 events

    • 2.5.19 Get list of JP1 users

    • 2.5.20 Get JP1 user mapping definition

    • 2.5.21 Batch change of operation users

    • 2.5.22 Batch change of operation users(SYSTEM)

    • 2.5.23 Batch change of operation users (repeated flow 1)

    • 2.5.24 Batch change of operation users (repeated flow 2)

    • 2.5.25 Delete operational user

    • 2.5.26 Delete operational user(SYSTEM)

    • 2.5.27 Add operational user

    • 2.5.28 Add operational user(SYSTEM)

    • 2.5.29 Change operational user

    • 2.5.30 Change operational user(SYSTEM)

  • 2.6 Service templates for JP1 (reporting)

    • 2.6.1 Get JP1/PFM report

  • 2.7 Service templates for JP1 (troubleshooting)

    • 2.7.1 Get JP1/AJS and JP1/Base logs

    • 2.7.2 Get JP1/IM and JP1/Base logs

    • 2.7.3 Changing of the JP1 event action status

    • 2.7.4 Registration of the JP1 event

  • 2.8 Service templates for OS (generic processing)

    • 2.8.1 Execute Remote Command

  • 2.9 Service templates for OS (configuration)

    • 2.9.1 Registering Chef Client

    • 2.9.2 Registering the Puppet Enterprise Agent instance

  • 2.10 Service templates for OS (operation)

    • 2.10.1 Get Lists of Users from Multiple Servers

    • 2.10.2 Get Lists of Users from Multiple Servers (repeated flow)

    • 2.10.3 Get List of Users from Server

  • 2.11 Service templates for providing Plug-ins

    • 2.11.1 Utility Components

• 3. JP1/AO Content Pack Service Templates

  • 3.1 List of JP1/AO Content Pack service templates

    • 3.1.1 List of the service templates used for AWS (configuration)

    • 3.1.2 List of the service templates used for AWS (operation)

    • 3.1.3 List of the service templates used for Hyper-V 2008 (configuration)

    • 3.1.4 List of the service templates used for Hyper-V 2008 (operation)

    • 3.1.5 List of the service templates used for Hyper-V 2012 (configuration)

    • 3.1.6 List of the service templates used for Hyper-V 2012 (operation)

    • 3.1.7 List of the service templates used for Hyper-V 2016 (configuration)

    • 3.1.8 List of the service templates used for Hyper-V 2016 (operation)

    • 3.1.9 List of the service templates used for OpenStack (configuration)

    • 3.1.10 List of the service templates used for OpenStack (operation)

    • 3.1.11 List of the service templates used for OS (configuration)

    • 3.1.12 List of the service templates used for vSphere (configuration)

    • 3.1.13 List of the service templates used for vSphere (operation)

    • 3.1.14 List of the service templates used for providing Plug-ins

  • 3.2 Usage examples of service templates relating to virtual servers

    • 3.2.1 Usage example of Create Datastore on VMware vSphere service template

    • 3.2.2 Usage example of Migrate Virtual Machine service template

  • 3.3 System configurations for JP1/AO Content Pack service templates

    • 3.3.1 System configuration of Create Datastore on VMware vSphere

    • 3.3.2 System configuration of Deploy and Setup OS on Virtual Machine

    • 3.3.3 System configuration of Add Virtual Disk to Virtual Machine

    • 3.3.4 System configuration of Delete Virtual Machine

    • 3.3.5 System configuration of Remove Virtual Disk from Virtual Machine

    • 3.3.6 System configuration of Delete Datastore on VMware vSphere

    • 3.3.7 System configuration of Modify Virtual Machine Configuration

    • 3.3.8 System configuration of Create Snapshot of Virtual Machine

    • 3.3.9 System configuration of Start Virtual Machine

    • 3.3.10 System configuration of Stop Virtual Machine

    • 3.3.11 System configuration of Restart Virtual Machine

    • 3.3.12 System configuration of Migrate Virtual Machine

    • 3.3.13 System configuration of Pre-check for Datastore Creation on VMware vSphere

    • 3.3.14 System configuration of Pre-check for OS Deployment on Virtual Machine

    • 3.3.15 System configuration of Get List of Virtual Machines from VMware vSphere

    • 3.3.16 System configuration of Get List of Storage Systems from Device Manager

    • 3.3.17 System configuration of Clone Virtual Machine

    • 3.3.18 System configuration of Delete Cloned Virtual Machine

  • 3.4 Service templates for AWS (configuration)

    • 3.4.1 Delete a virtual server

    • 3.4.2 Add a virtual server (deploy)

  • 3.5 Service templates for AWS (operation)

    • 3.5.1 Start virtual servers

    • 3.5.2 Start virtual servers (repeated flow)

    • 3.5.3 Stop virtual servers

    • 3.5.4 Stop virtual servers (repeated flow)

  • 3.6 Service templates for Hyper-V 2008 (configuration)

    • 3.6.1 Delete a virtual server

    • 3.6.2 Add a virtual server (deploy/OS initial settings)

    • 3.6.3 Add a virtual server (virtual disk)

  • 3.7 Service templates for Hyper-V 2008 (operation)

    • 3.7.1 Start virtual servers

    • 3.7.2 Start the virtual server (repeated flow)

    • 3.7.3 Restart virtual servers

    • 3.7.4 Restart a virtual server (repeated flow)

    • 3.7.5 Obtain the virtual server information list

    • 3.7.6 Stop the virtual server

    • 3.7.7 Stop the virtual server (repeated flow)

  • 3.8 Service templates for Hyper-V 2012 (configuration)

    • 3.8.1 Change virtual server specifications (CPU and memory)

    • 3.8.2 Delete virtual server

    • 3.8.3 Add a virtual server (deploy/OS initial settings)

    • 3.8.4 Add virtual server (virtual disk)

  • 3.9 Service templates for Hyper-V 2012 (operation)

    • 3.9.1 Start virtual server

    • 3.9.2 Start virtual server (repeated flow)

    • 3.9.3 Restart virtual server

    • 3.9.4 Restart virtual server (repeated flow)

    • 3.9.5 Obtain virtual server information list

    • 3.9.6 Stop virtual server

    • 3.9.7 Stop virtual server (repeated flow)

  • 3.10 Service templates for Hyper-V 2016 (configuration)

    • 3.10.1 Change virtual server specifications (CPU and memory)

    • 3.10.2 Delete virtual server

    • 3.10.3 Add a virtual server (deploy/OS initial settings)

    • 3.10.4 Add virtual server (virtual disk)

  • 3.11 Service templates for Hyper-V 2016 (operation)

    • 3.11.1 Start virtual server

    • 3.11.2 Start virtual server (repeated flow)

    • 3.11.3 Restart virtual server

    • 3.11.4 Restart virtual server (repeated flow)

    • 3.11.5 Obtain virtual server information list

    • 3.11.6 Stop virtual server

    • 3.11.7 Stop virtual server (repeated flow)

  • 3.12 Service templates for OpenStack (configuration)

    • 3.12.1 Delete a virtual server

    • 3.12.2 Delete a virtual server (virtual disk)

    • 3.12.3 Addition of a virtual server (deployment/OS initial setup)

    • 3.12.4 Add virtual server (virtual disk)

  • 3.13 Service templates for OpenStack (operation)

    • 3.13.1 Back up volumes

    • 3.13.2 Start virtual server

    • 3.13.3 Start virtual server (repeated flow)

    • 3.13.4 Obtain a virtual server information list

  • 3.14 Service templates for OS (configuration)

    • 3.14.1 Windows update program installation

    • 3.14.2 Windows update program installation (repeated flow)

  • 3.15 Service templates for vSphere (configuration)

    • 3.15.1 Script execution through the vCenter server

    • 3.15.2 Modify Virtual Machine Configuration

    • 3.15.3 Create Snapshot of Virtual Machine

    • 3.15.4 Delete Virtual Machine

    • 3.15.5 Delete Datastore on VMware vSphere

    • 3.15.6 Remove Virtual Disk from Virtual Machine

    • 3.15.7 Create Datastore on VMware vSphere

    • 3.15.8 Deploy and Setup OS on Virtual Machine

    • 3.15.9 Add Virtual Disk to Virtual Machine

    • 3.15.10 Add virtual server (virtual disk) (repeated flow)

  • 3.16 Service templates for vSphere (operation)

    • 3.16.1 Get List of Storage Systems from Device Manager

    • 3.16.2 Clone Virtual Machine

    • 3.16.3 Delete Cloned Virtual Machine

    • 3.16.4 Migrate Virtual Machine

    • 3.16.5 Migrate virtual server (repeated flow)

    • 3.16.6 Start Virtual Machine

    • 3.16.7 Start virtual server (repeated flow)

    • 3.16.8 Restart Virtual Machine

    • 3.16.9 Restart virtual server (repeated flow)

    • 3.16.10 Get List of Virtual Machines from VMware vSphere

    • 3.16.11 Pre-check for Datastore Creation on VMware vSphere

    • 3.16.12 Pre-check for OS Deployment on Virtual Machine

    • 3.16.13 Stop Virtual Machine

    • 3.16.14 Stop virtual server (repeated flow)

  • 3.17 Service templates for providing Plug-ins

    • 3.17.1 AWS Components

    • 3.17.2 HCS Components

    • 3.17.3 Hyper-V2008 Components

    • 3.17.4 Hyper-V2012 Components

    • 3.17.5 Hyper-V2016 Components

    • 3.17.6 OpenStack Components

    • 3.17.7 Oracle Components

    • 3.17.8 vSphere Components

• 4. JP1/AO Standard-package Plug-ins

  • 4.1 List of basic plug-ins

  • 4.2 Basic plug-ins

    • 4.2.1 Notes common to basic plug-ins

    • 4.2.2 General command plug-in

    • 4.2.3 File-Transfer Plug-in

    • 4.2.4 Repeated execution plug-in

    • 4.2.5 Email notification plug-in

    • 4.2.6 User-response wait plug-in

    • 4.2.7 Standard output plug-in

    • 4.2.8 Terminal connect plug-in

    • 4.2.9 Terminal command plug-in

    • 4.2.10 Terminal disconnect plug-in

    • 4.2.11 Flow plug-in

    • 4.2.12 Interval plug-in

    • 4.2.13 Branch by returncode plug-in

    • 4.2.14 Test value plug-in

    • 4.2.15 Abnormal-end plug-in

    • 4.2.16 Branch by property value plug-in

    • 4.2.17 JavaScript plug-in

    • 4.2.18 File export plug-in

    • 4.2.19 Web client plug-in

  • 4.3 List of plug-ins in the JP1/AO Content Set

    • 4.3.1 List of the Active Directory-related Plug-ins

    • 4.3.2 List of the JP1-related Plug-ins

    • 4.3.3 List of the JP1/AJS-related Plug-ins

    • 4.3.4 List of the JP1/Base-related Plug-ins

    • 4.3.5 List of the JP1/IM-related Plug-ins

    • 4.3.6 List of the JP1/NNMi-related Plug-ins

    • 4.3.7 List of the JP1/PFM-related Plug-ins

    • 4.3.8 List of the JP1/SS-related Plug-ins

    • 4.3.9 List of the JP1/VERITAS-related Plug-ins

    • 4.3.10 List of the OS-related Plug-ins

    • 4.3.11 List of the TELstaff-related Plug-ins

    • 4.3.12 List of the UNIX-related Plug-ins

    • 4.3.13 List of the Windows-related Plug-ins

  • 4.4 Active Directory-related Plug-ins

    • 4.4.1 Moving an object in the Active Directory

    • 4.4.2 Searching for an object in the Active Directory

    • 4.4.3 Delete an object from the Active Directory instance

    • 4.4.4 Acquiring a group member list in the Active Directory

    • 4.4.5 Changing the group attribute in the Active Directory

    • 4.4.6 Add a group to the Active Directory instance

    • 4.4.7 Changing the OU attribute of the Active Directory

    • 4.4.8 Acquiring a UPN list in the Active Directory

    • 4.4.9 Adding an OU to the Active Directory

    • 4.4.10 Unlocking user account in the Active Directory

    • 4.4.11 Changing the user password in the Active Directory

    • 4.4.12 Modify user attributes on the Active Directory instance

    • 4.4.13 Add a user to the Active Directory instance

    • 4.4.14 Delete a member from an existing Active Directory group

    • 4.4.15 Add a member to an existing Active Directory group

    • 4.4.16 Changing the attribute of the contact in the Active Directory

    • 4.4.17 Adding a contact in the Active Directory

  • 4.5 JP1-related Plug-ins

    • 4.5.1 JP1 silent install (UNIX)

    • 4.5.2 JP1 silent install (Windows)

    • 4.5.3 JP1 apply patch (UNIX)

    • 4.5.4 JP1 apply patch (Windows)

  • 4.6 JP1/AJS-related Plug-ins

    • 4.6.1 Register for JP1/AJS jobnet fixed execution

    • 4.6.2 Forced termination of JP1/AJS jobnet

    • 4.6.3 Register for JP1/AJS jobnet planned execution

    • 4.6.4 Re-execute JP1/AJS jobnet

    • 4.6.5 Change JP1/AJS jobnet execution schedule

    • 4.6.6 Stop JP1/AJS jobnet execution

    • 4.6.7 Register JP1/AJS jobnet for execution

    • 4.6.8 JP1/AJS jobnet scheduled execution results output

    • 4.6.9 Suspend JP1/AJS jobnet

    • 4.6.10 Change hold attribute for JP1/AJS jobnet

    • 4.6.11 Change JP1/AJS job status

    • 4.6.12 Get JP1/AJS jobnet execution results

    • 4.6.13 Get JP1/AJS troubleshooting information

    • 4.6.14 Start JP1/AJS(UNIX)

    • 4.6.15 Obtain Status of JP1/AJS

    • 4.6.16 Stop JP1/AJS(UNIX)

    • 4.6.17 Check JP1/AJS unit existence

  • 4.7 JP1/Base-related Plug-ins

    • 4.7.1 Start event service of JP1/Base(UNIX)

    • 4.7.2 Obtain event service Status of JP1/Base

    • 4.7.3 Stop event service of JP1/Base(UNIX)

    • 4.7.4 Get JP1/Base troubleshooting information

    • 4.7.5 Change password management information in JP1/Base

    • 4.7.6 Change password management information in JP1/Base(SYSTEM)

    • 4.7.7 Add JP1/Base user mapping

    • 4.7.8 Add JP1/Base user mapping(SYSTEM)

    • 4.7.9 Start JP1/Base

    • 4.7.10 Obtain Status of JP1/Base

    • 4.7.11 Stop JP1/Base(UNIX)

    • 4.7.12 Delete JP1/Base user mapping

    • 4.7.13 Delete JP1/Base user mapping(SYSTEM)

    • 4.7.14 JP1/Base common definition information setting

    • 4.7.15 Set JP1/Base permissions

    • 4.7.16 Set JP1/Base permissions(SYSTEM)

    • 4.7.17 Registration of a JP1 event

    • 4.7.18 Change JP1 user password

    • 4.7.19 Change JP1 user password(SYSTEM)

    • 4.7.20 Get list of JP1 users

    • 4.7.21 Delete JP1 user

    • 4.7.22 Delete JP1 user(SYSTEM)

    • 4.7.23 Delete JP1 user permissions

    • 4.7.24 Delete JP1 user permissions(SYSTEM)

    • 4.7.25 Add JP1 user

    • 4.7.26 Add JP1 user(SYSTEM)

    • 4.7.27 Delete OS user information

    • 4.7.28 Delete OS user information(SYSTEM)

    • 4.7.29 Check mapping information

  • 4.8 JP1/IM-related Plug-ins

    • 4.8.1 Collect JP1/IM troubleshooting information

    • 4.8.2 Changing the JP1 event action status

    • 4.8.3 Get JP1 event

  • 4.9 JP1/NNMi-related Plug-ins

    • 4.9.1 Output of the NNMi topology database content

    • 4.9.2 Delete monitored node

    • 4.9.3 Add monitored node

  • 4.10 JP1/PFM-related Plug-ins

    • 4.10.1 Set Store database storage conditions

    • 4.10.2 Copy alarm table (JP1/PFM)

    • 4.10.3 Delete alarm table (JP1/PFM)

    • 4.10.4 Acquire alarm table information (JP1/PFM)

    • 4.10.5 Get list of alarm table names (JP1/PFM - RM)

    • 4.10.6 Unbind alarm (JP1/PFM - RM)

    • 4.10.7 Bind alarm (JP1/PFM - RM)

    • 4.10.8 Import alarm definition file (JP1/PFM)

    • 4.10.9 Export alarm definition file (JP1/PFM)

    • 4.10.10 Set agent hierarchy

    • 4.10.11 Synchronize service information

    • 4.10.12 Get list of process monitoring settings

    • 4.10.13 Add process monitoring settings

    • 4.10.14 Get report

    • 4.10.15 Add monitoring setting

    • 4.10.16 Delete monitoring target (JP1/PFM - RM)

    • 4.10.17 Add monitoring target (JP1/PFM - RM)

    • 4.10.18 Display monitoring targets (JP1/PFM - RM)

  • 4.11 JP1/SS-related Plug-ins

    • 4.11.1 Update JP1/IM-SS Instance

    • 4.11.2 Register JP1/IM-SS Instance

  • 4.12 JP1/VERITAS-related Plug-ins

    • 4.12.1 Execute instant recovery (JP1/VERITAS)

    • 4.12.2 End instant recovery (JP1/VERITAS)

    • 4.12.3 Initialize Backup Policy (VMware)

    • 4.12.4 Change Backup Policy Attributes (VMware)

    • 4.12.5 Create Backup Policy

    • 4.12.6 Add Clients to Backup Policy

    • 4.12.7 Change Backup Policy Schedule Attributes

    • 4.12.8 Add Schedule to Backup Policy

    • 4.12.9 Add File List to Backup Policy

    • 4.12.10 Perform backup (JP1/VERITAS)

    • 4.12.11 Virtual-machine restoration

    • 4.12.12 Rename-file creation

  • 4.13 OS-related Plug-ins

    • 4.13.1 Update cell data in a CSV/Excel file

    • 4.13.2 Acquisition of cell data from a CSV/Excel file

    • 4.13.3 Division of data from a CSV/Excel file

    • 4.13.4 Acquisition of row data from a CSV/Excel file

    • 4.13.5 Acquisition of column data from a CSV/Excel file

    • 4.13.6 Send ICMP echo request message

    • 4.13.7 Set IP address

    • 4.13.8 Operate OS Service

    • 4.13.9 Change password for OS user

    • 4.13.10 Change password for OS user(SYSTEM)

    • 4.13.11 Get list of OS users

    • 4.13.12 Delete OS user

    • 4.13.13 Delete OS user(SYSTEM)

    • 4.13.14 Output OS type

    • 4.13.15 Shutdown Server

    • 4.13.16 Restart Server

    • 4.13.17 Extract character string in a text file

    • 4.13.18 Copy file

    • 4.13.19 Obtaining the file size

    • 4.13.20 Compressing a file

    • 4.13.21 Decompressing a file

    • 4.13.22 Obtaining the latest update time stamp of a file

    • 4.13.23 Converting the character encoding of a file

    • 4.13.24 Acquiring access authority of a file or folder

    • 4.13.25 Confirm file or folder existence

    • 4.13.26 Moving a file

    • 4.13.27 Obtaining a file list

    • 4.13.28 Delete file

    • 4.13.29 Delete file(SYSTEM)

    • 4.13.30 Create folder

    • 4.13.31 Delete folder

    • 4.13.32 Acquiring process information

    • 4.13.33 Get host name

    • 4.13.34 Execution Wait

    • 4.13.35 Calculating dates and times

    • 4.13.36 Obtain date and time

    • 4.13.37 Comparing dates and times

    • 4.13.38 Sorting character strings

    • 4.13.39 Filter Text

    • 4.13.40 Search Text

    • 4.13.41 Replace character string

    • 4.13.42 Adding a character string

  • 4.14 TELstaff-related Plug-ins

    • 4.14.1 Notifications by TELstaff

  • 4.15 UNIX-related Plug-ins

    • 4.15.1 Add OS user (UNIX)

    • 4.15.2 Change file or directory access permissions

  • 4.16 Windows-related Plug-ins

    • 4.16.1 Get CSV data

    • 4.16.2 Send ICMP echo request message (confirm no response)

    • 4.16.3 Changing the account for the OS service

    • 4.16.4 Startup setting for the OS service

    • 4.16.5 Set group of OS user (Windows)

    • 4.16.6 Set group of OS user (Windows)(SYSTEM)

    • 4.16.7 Add OS user (Windows)

    • 4.16.8 Add OS user (Windows)(SYSTEM)

    • 4.16.9 Execute SQL Query

    • 4.16.10 Configure Windows firewall

    • 4.16.11 Get event list from Event log

    • 4.16.12 Create event for Event log

    • 4.16.13 Printing a file (in Windows)

    • 4.16.14 Change file or folder access permissions

    • 4.16.15 Time determination

• 5. JP1/AO Content Pack Plug-ins

  • 5.1 List of JP1/AO Content Pack plug-ins

    • 5.1.1 List of the AWS-related Plug-ins

    • 5.1.2 List of the HCS-related Plug-ins

    • 5.1.3 List of the Hyper-V 2008-related Plug-ins

    • 5.1.4 List of the Hyper-V 2012-related Plug-ins

    • 5.1.5 List of the Hyper-V 2016-related Plug-ins

    • 5.1.6 List of the Linux-related Plug-ins

    • 5.1.7 List of the OpenStack-related Plug-ins

    • 5.1.8 List of the Oracle-related Plug-ins

    • 5.1.9 List of the OS-related Plug-ins

    • 5.1.10 List of the vSphere-related Plug-ins

    • 5.1.11 List of the Windows-related Plug-ins

  • 5.2 AWS-related Plug-ins

    • 5.2.1 AMI creation

    • 5.2.2 Stack creation

    • 5.2.3 Stack deletion

    • 5.2.4 Stack information list

    • 5.2.5 Creating a snapshot

    • 5.2.6 Deleting a snapshot

    • 5.2.7 Acquiring a list of information about snapshots

    • 5.2.8 Uploading a file

    • 5.2.9 Downloading a file

    • 5.2.10 Deleting a file

    • 5.2.11 Virtual server resources configuration

    • 5.2.12 Shut down a virtual server

    • 5.2.13 Start a virtual server

    • 5.2.14 Create a virtual server

    • 5.2.15 Delete a virtual server

    • 5.2.16 Virtual server information list

    • 5.2.17 Obtain status of virtual server

  • 5.3 HCS-related Plug-ins

    • 5.3.1 Create DP volume

    • 5.3.2 Delete DP volume

    • 5.3.3 Check HDvM connectivity

    • 5.3.4 Check LU creation

    • 5.3.5 Get storage information list

    • 5.3.6 Delete LU from host group

    • 5.3.7 Register LU in host group

  • 5.4 Hyper-V 2008-related Plug-ins

    • 5.4.1 Create a response file

    • 5.4.2 Obtain the IP address of a virtual server

    • 5.4.3 Shut down a virtual server

    • 5.4.4 Virtual server virtual switch settings

    • 5.4.5 Start a virtual server

    • 5.4.6 Create a virtual server

    • 5.4.7 Delete a virtual server

    • 5.4.8 Obtain a virtual server information list

    • 5.4.9 Obtain the virtual server status

    • 5.4.10 Add a disk to the virtual server

    • 5.4.11 Unmount a virtual disk

    • 5.4.12 Mount a virtual disk

  • 5.5 Hyper-V 2012-related Plug-ins

    • 5.5.1 Create a response file

    • 5.5.2 Change CPU Settings of Virtual Server

    • 5.5.3 Obtain IP Address of Virtual Server

    • 5.5.4 Shut down a virtual server

    • 5.5.5 Change Memory Settings of Virtual Server

    • 5.5.6 Virtual server virtual switch settings

    • 5.5.7 Start a virtual server

    • 5.5.8 Create a virtual server

    • 5.5.9 Delete Virtual Servers

    • 5.5.10 Obtain the virtual server information list

    • 5.5.11 Obtain Status of Virtual Server

    • 5.5.12 Unmount a virtual disk

    • 5.5.13 Mount a virtual disk

    • 5.5.14 Create Virtual Disk

    • 5.5.15 Connect Virtual Disk

  • 5.6 Hyper-V 2016-related Plug-ins

    • 5.6.1 Create a response file

    • 5.6.2 Change CPU Settings of Virtual Server

    • 5.6.3 Obtain IP Address of Virtual Server

    • 5.6.4 Shut down a virtual server

    • 5.6.5 Change Memory Settings of Virtual Server

    • 5.6.6 Virtual server virtual switch settings

    • 5.6.7 Start a virtual server

    • 5.6.8 Create a virtual server

    • 5.6.9 Delete Virtual Servers

    • 5.6.10 Obtain the virtual server information list

    • 5.6.11 Obtain Status of Virtual Server

    • 5.6.12 Unmount a virtual disk

    • 5.6.13 Mount a virtual disk

    • 5.6.14 Create Virtual Disk

    • 5.6.15 Connect Virtual Disk

  • 5.7 Linux-related Plug-ins

    • 5.7.1 Initial OS settings (Linux)

  • 5.8 OpenStack-related Plug-ins

    • 5.8.1 Backup Volume

    • 5.8.2 Create Volume

    • 5.8.3 Delete Volume

    • 5.8.4 Disconnect volume

    • 5.8.5 Connect Volume

    • 5.8.6 Create Temporary Volume

    • 5.8.7 Obtain IP Address of Virtual Server

    • 5.8.8 Activate Virtual Server

    • 5.8.9 Create a virtual server

    • 5.8.10 Delete virtual server

    • 5.8.11 Get list of virtual server information

    • 5.8.12 Obtain Status of Virtual Server

  • 5.9 Oracle-related Plug-ins

    • 5.9.1 Start an Oracle DB instance

    • 5.9.2 Stop an Oracle DB instance

    • 5.9.3 Delete an Oracle DB user

    • 5.9.4 Add an Oracle DB user (UNIX)

    • 5.9.5 Add an Oracle DB user (Windows)

  • 5.10 OS-related Plug-ins

    • 5.10.1 Set static route

  • 5.11 vSphere-related Plug-ins

    • 5.11.1 DRS automation level setting for the DRS clusters

    • 5.11.2 Add a DRS rule (from virtual server to host)

    • 5.11.3 Set maintenance mode for the ESX server

    • 5.11.4 Move the ESX server

    • 5.11.5 Obtain list of virtual network information for the ESX server

    • 5.11.6 Set FC path priority

    • 5.11.7 Set virtual server options for the HA cluster

    • 5.11.8 Monitoring settings for the virtual server in the HA cluster

    • 5.11.9 Recognize LUN

    • 5.11.10 Get canonical name of SCSI LUN

    • 5.11.11 Script execution through the vCenter server

    • 5.11.12 File deletion through the vCenter server

    • 5.11.13 File transmission through the vCenter server

    • 5.11.14 Folder deletion through the vCenter server

    • 5.11.15 Folder transmission through the vCenter server

    • 5.11.16 Check VMware vCenter Server connectivity

    • 5.11.17 Create data store

    • 5.11.18 Check data store creation

    • 5.11.19 Delete data store

    • 5.11.20 Create a template

    • 5.11.21 Delete a template

    • 5.11.22 Change the network adapter settings

    • 5.11.23 Add a network adapter

    • 5.11.24 Set traffic shaping policy for the port group

    • 5.11.25 Set host DRS group

    • 5.11.26 Retrieving log bundles

    • 5.11.27 Set the virtual server DRS group

    • 5.11.28 Get virtual server IP address

    • 5.11.29 Set OS init. settings and IP addr. of virtual servers (Linux)

    • 5.11.30 Set OS init. settings and IP addr. of virtual servers (Windows)

    • 5.11.31 Creating a virtual server clone

    • 5.11.32 Deletion of a virtual server clone

    • 5.11.33 Shut down virtual server

    • 5.11.34 Moving a virtual server snapshot

    • 5.11.35 Creating a virtual server snapshot

    • 5.11.36 Deletion of a virtual server snapshot

    • 5.11.37 Migrate virtual server

    • 5.11.38 Resource configuration setting of the virtual server

    • 5.11.39 Pre-eval. of resource configuration changes in virtual server

    • 5.11.40 Set virtual server resources

    • 5.11.41 Pre-evaluation of resource changes in virtual server

    • 5.11.42 Start virtual server

    • 5.11.43 Create virtual server

    • 5.11.44 Delete virtual server

    • 5.11.45 Get power status of virtual server

    • 5.11.46 Add virtual disk to virtual server

    • 5.11.47 Check virtual server creation

    • 5.11.48 Get list of virtual server information

    • 5.11.49 Extend a virtual disk

    • 5.11.50 Delete virtual disk

    • 5.11.51 Change virtual machine port group

    • 5.11.52 Add a port group to the standard virtual switch

    • 5.11.53 Get the physical adapter information list

    • 5.11.54 Set the physical adapter

  • 5.12 Windows-related Plug-ins

    • 5.12.1 Obtain the MAC address of an NIC

    • 5.12.2 Windows network settings

    • 5.12.3 Install the Windows updates

• Appendix

  • A. Reference Information

    • A.1 Functional differences between basic plug-ins by version

    • A.2 List of protocols used by each plug-in

    • A.3 List of statuses of virtual servers managed by Hyper-V

    • A.4 Prerequisites for executing command lines containing non-ASCII characters in UNIX

    • A.5 List of plug-ins contained in service templates

    • A.6 Version changes

• Index

To Page Top