2.2.1 Usage example of Add monitoring setting service template
This section describes an assumed system configuration and examples of properties to be specified when using the Add monitoring setting service template.
By using this service template, you can add monitoring targets and make monitoring settings in JP1/Cm2/NNM and JP1/PFM.
Assumed system configuration
This service template assumes the following system configuration:
- Web browser
-
A terminal used to operate JP1/AO. The user uses this terminal to set property values in the service template.
- IT operation automation server
-
A server with JP1/AO and JP1/Base installed. On the local disk (C:\temp) of the IT operation automation server, prepare the following monitoring definition files in advance:
-
Definition file for monitoring (agent.conf)
-
Agent hierarchy definition file (tree.xml)
-
Application definition file (process.xml)
-
Definition file for method of recording (parameter.xml)
-
Definition file for data retention conditions (store.xml)
-
- NNM server
-
A server with JP1/Cm2/NNM or JP1/Cm2/NNMi installed.
- PFM-RM server
-
A server with JP1/PFM-RM and JP1/PFM - Base installed.
- PFM management server
-
A server with JP1/PFM - Manager and JP1/PFM - Web Console installed.
- ESX server
-
A server with VMware vSphere ESXi (or VMware ESX Server) installed. This server controls the monitoring target server.
- Monitoring target server
-
A server set as a monitoring target of the NNM server or the PFM-RM server.
|
Processing flow
-
A user enters property values in the Web browser and submits the service for execution.
-
The IT operation automation server executes automatic processing on the PFM management server, the PFM-RM server, and the NNM server.
-
A monitored node is added to the NNM server.
-
A remote agent is added to the PFM-RM server.
-
An agents tree is added to the PFM management server.
-
The following monitoring settings are added to the added remote agent:
-
Method of recording performance data
-
Retention conditions of performance data
-
Process monitoring settings
-
Alarm table settings
-
Example of specifying property values
To use the Add monitoring setting service template, a user must specify the appropriate property values for the user environment. Specify the property values in the Service Definition window and the Submit Service window.
Property group |
Property name |
Property key |
Description |
Specification example |
---|---|---|---|---|
Monitored system environment information |
NNMi server host name |
jp1cm2nnm.nnmHostName |
Specify the host name of the server where JP1/Cm2/NNMi is installed. Specify the physical host name of primary server or the logical host name of JP1/Cm2/NNMi. |
cm2host |
PFM management server host name |
jp1pfm.pfmHostName |
Specifies the host name of the server where JP1/PFM - Manager and JP1/PFM - Web Console are installed. In the case of a cluster configuration, specify the physical host or logical host of the active server. |
pfmhost |
|
Host name of PFM-RM server |
jp1pfm.pfmRMHostName |
Specifies the host name of the server where JP1/PFM - RM for Platform is installed. In the case of a cluster configuration, specify the physical host or logical host of the active server. |
pfmrmhost |
|
Monitoring information |
Instance name of JP1/PFM - RM |
jp1pfm.instance |
Specify the name of the instance of JP1/PFM - RM for Platform associated with the remote agent of the monitor server. |
INST1 |
Monitoring target definition file (local) |
jp1pfm.agentDefFileLocal |
Specify the full path of the monitoring target definition file to be transferred from the JP1/AO server. |
C:\temp\agent.txt |
|
Monitoring target definition file (remote) |
jp1pfm.agentDefFileRemote |
Specify the full destination path for the monitoring target definition files to be transferred to the PFM-RM server. |
D:\temp\agent.txt |
|
Option monitoring information |
Agent tree definition file (local) |
jp1pfm.agentLevelDefFileNameLocal |
Specify the full path of the agent tree definition file to be transferred from the JP1/AO server. If you omit this property, the service will not transfer a file or apply its contents. |
C:\temp\tree.xml |
Agent tree definition file (remote) |
jp1pfm.agentLevelDefFileNameRemote |
Specify the full destination path for agent tree definition files to be transferred to the PFM management server. |
D:\temp\tree.xml |
|
Recording method definition file (local) |
jp1pfm.paramDefFileLocal |
Specify the full path of the recording method definition file to be transferred from the JP1/AO server. If you omit this property, the service will not transfer the file or apply its contents. |
C:\temp\param.xml |
|
Recording method definition file (remote) |
jp1pfm.paramDefFileRemote |
Specify the full destination path for the recording method definition files to be transferred to the PFM management server. |
D:\temp\param.xml |
|
Storage conditions definition file (local) |
jp1pfm.saveConditionDefFileNameLocal |
Specify the full path of the storage conditions definition file to be transferred from the JP1/AO server. If you omit this property, the service will not transfer the file or apply its contents. |
C:\temp\store.xml |
|
Storage conditions definition file (remote) |
jp1pfm.saveConditionDefFileNameRemote |
Specify the full destination path for storage conditions definition files to be transferred to the PFM management server. |
D:\temp\store.xml |
|
Application definition file (local) |
jp1pfm.procMonDefFileLocal |
Specify the full path of the application definition file to be transferred from the JP1/AO server. If you omit this property, the service will not transfer the file or apply its contents. |
C:\temp\process.txt |
|
Application definition file (remote) |
jp1pfm.procMonDefFileRemote |
Specify the full destination path for application definition files transferred to the PFM management server. |
D:\temp\process.txt |
Property group |
Property name |
Property key |
Description |
Specification example |
---|---|---|---|---|
Monitoring information |
IP address of monitor server |
common.foreachIPaddress |
Specify the IP address of the monitored server. Separate multiple addresses with commas. You cannot specify an IPv6 address. |
192.168.1. xx ,192.168.1. yy |