2.7.3 Changing of the JP1 event action status
Function
Changes the action status of a JP1 event registered in the JP1/IM - Manager event database, or deletes a JP1 event from the Severe Event pages of JP1/IM - View.
This template is used to, for example, change the action status of a sent JP1 event to "Completed", and then delete the event from JP1/IM - View after error recovery.
This service template assumes the following servers as prerequisites:
- Monitoring server
- Server running JP1/IM - Manager
An outline of the processing is as follows:
(1) The action status of the JP1 event registered in the JP1/IM - Manager event database is changed.
To delete the JP1 event from the Severe Event pages of JP1/IM - View, set the jp1im.deleteSevereEventFromIMView property (indicating whether to delete an important event from JP1/IM-View) to "yes".
Specify one of the following important event action status keys to change the action status:
(Legend) Key: Changed action status
PROCESSED: Action-completed
PROCESSING: Processing
HELD: Pending
UNPROCESSED: Unprocessed
Prerequisites
For the latest support information about [Required product in the System]/[Prerequisite products in the system executing the service template]/[Prerequisite product OS running in the system executing the service template], see the release notes.
[Required product in the System]
JP1/Automatic Operation 11-10 or later
[Prerequisite products in the system executing the service template]
(1) Job Management Partner 1/Integrated Management - Manager 08-01 or later, or
JP1/Integrated Management - Manager 11-00 or later
[Prerequisite product OS running in the system executing the service template]
(1) Windows Server 2008 R2 Standard/Enterprise/Datacenter
(2) Windows Server 2012 Standard/Datacenter, Windows Server 2012 R2 Standard/Datacenter
(3) Windows Server 2016 Standard/Datacenter
(4) Red Hat Enterprise Linux Server 6 (32-bit x86), Red Hat Enterprise Linux Server 6 (64-bit x86_64)
(5) Red Hat Enterprise Linux Server 7 (64-bit x86_64)
(6) AIX V6.1, AIX V7.1
[Usage conditions for the required products for the service template execution system]
(1) JP1/IM - Manager is running.
Version
02.00.00
Tags
Configure JP1,IM
Property list
The following shows the list of the property groups set in the property:
Property group |
Description |
Initial display |
---|---|---|
Monitoring system environment information |
Specify monitoring server environment information. |
Y |
JP1 important event information |
Specify information about a JP1 event whose action status is to be changed. |
Y |
The following shows the list of the properties to be displayed in the "Service Definition" window:
- (Legend)
-
R: The property must be specified.
O: The property can be omitted. However, the property might be mandatory depending on what is specified for other properties. See the Description of each property.
Property key |
Property name |
Description |
I/O type |
Shared |
Required |
Property group |
---|---|---|---|---|---|---|
jp1im.jp1imHostName |
JP1/IM host name |
Specifies the host name or IP address where JP1/IM is installed. IPv6 addresses are not supported. In the case of a cluster configuration, specify the physical host or logical host of the active server. |
Input |
Disabled |
R |
Monitoring system environment information |
jp1im.jp1imLHostName |
JP1/IM logical host name |
Specify the logical host name of JP1/IM (when using JP1/IM in a cluster configuration). |
Input |
Disabled |
O |
Monitoring system environment information |
The following shows the list of the properties to be displayed on the "Service Definition" window and the "Submit Service" window:
Property key |
Property name |
Description |
I/O type |
Shared |
Required |
Property group |
---|---|---|---|---|---|---|
jp1im.serialNumber |
Serial number for use in the event database |
Specify the serial number of an important event that changes an action status for use in the event database. Up to 10 serial numbers can be specified for use in the event database. To specify two or more serial numbers, separate them with a comma. |
Input |
Disabled |
R |
JP1 important event information |
jp1im.severeEventResponseStatusKey |
Important event action status key |
Specify a key value that indicates the action status of the important event. |
Input |
Disabled |
R |
JP1 important event information |
jp1im.deleteSevereEventFromIMView |
Important event deletion from JP1/IM-View |
Specify whether to delete the specified important event from any JP1/IM - View window. |
Input |
Disabled |
R |
JP1 important event information |
The following shows the restrictions on inputs to the properties displayed in the "Service Definition" window:
Property key |
Characters that can be input |
---|---|
jp1im.jp1imHostName |
A maximum of 255 characters can be entered. Characters that can be used include alphanumeric characters, as well as . and -. |
jp1im.jp1imLHostName |
A maximum of 255 characters can be entered. Characters that can be used include alphanumeric characters, as well as . and -. |
The following shows the restrictions on inputs to the property displayed on the "Service Definition" window and the "Submit Service" window:
Property key |
Characters that can be input |
---|---|
jp1im.serialNumber |
This is a character string consisting of up to 109 numeric characters and commas (,). |
jp1im.severeEventResponseStatusKey |
Select one of the following values: PROCESSED,PROCESSING,HELD,UNPROCESSED |
jp1im.deleteSevereEventFromIMView |
Select one of the following values: yes,no |
Flow specification details
The following table shows the detailed specification of the flow:
Hierarchy |
Display name |
Plug-in |
||
---|---|---|---|---|
Plug-in name |
Description |
Error recovery method |
||
1 |
jp1imChangeEventStatus |
Changing the JP1 event action status |
Changes the action status of a JP1 event. |
Remove the cause of the error, and then execute the service again. |