Summary of amendments
Changes |
Location |
---|---|
The following OSs were added to the supported OSs:
|
-- |
The following functions were added to suppress forwarding of large numbers of events:
|
User's Guide: 2.5, 3.1, 3.2.3(6), 3.3.4(6), 4.1, 4.8, 10.1.1, 10.1.2, 10.1.8, 10.1.9, 15. List of commands, 15. jevagtfw, 15. jevfwstat, 15. jevreload, 16. Event server settings file, 16. Forwarding settings file, 16. Action definition file for log file trapping, 18.5.1(1), A.1, A.2, C.1, Appendix P Messages: -- Function Reference: -- |
Descriptions about the JP1 events to which local action execution conditions are applied were added. |
User's Guide: 2.8.1, 16. Local action execution definition file Messages: -- Function Reference: -- |
HNP_Admin was added to the permissions that are granted to JP1 users at initial settings for user management. |
Messages: -- Function Reference: -- |
Descriptions about the language type in the LANG environment variable for an automated startup script were added. |
User's Guide: 3.4.1, 3.4.1(1), 5.8.3, 7.2.1, 15. jbs_start (UNIX only), 15. jbs_start.cluster (UNIX only) Messages: -- Function Reference: -- |
Japanese UTF-8 is now supported as a language type in JP1/Base in HP-UX, Solaris, and AIX. |
User's Guide: 3.4.1 Messages: -- Function Reference: -- |
The jbsgetcnf command can now be used to collect definition information by specifying a component. |
User's Guide: 3.5.2(1)(b), 3.5.3(1)(b), 15. jbsgetcnf Messages: -- Function Reference: -- |
Exclusive control can now be enabled or disabled when outputting to an integrated trace log. |
User's Guide: 4.6, 15. hntr2conf, 15. hntr2getconf, 16. Action definition file for log file trapping Messages: -- Function Reference: -- |
The jbshostsimport command can now be used to forcibly register the jp1hosts information in an environment where jp1hosts2 information is specified. Descriptions about the behavior when both jp1hosts information and jp1hosts2 information is specified were also added. |
User's Guide: 5.6.1(4), 6.4.3, 6.4.4(2), 6.4.6, 6.6.1, 6.6.2, 15. jbshostsimport Messages: -- Function Reference: -- |
Notes on event service communication settings were added. |
Messages: -- Function Reference: -- |
Notes on using log file trapping to monitor a Unicode file in Windows were added. |
User's Guide: 11.1.3(3) Messages: -- Function Reference: -- |
The JP1/Base setup information can now be collected by one operation. |
User's Guide: 15. List of commands, 15. jbsparamdump, 16. List of definition files, 16. Collection information file, A.1, A.2 Messages: -- Function Reference: -- |
Notes on using the jbsmkumap and jbssetumap commands to register user mapping information in the common definition information were added. |
User's Guide: 15. jbsmkumap, 15. jbssetumap Messages: -- Function Reference: -- |
Notes on using the jbssetcnf command to change the JP1/AJS common definition information were added. |
User's Guide: 15. jbssetcnf Messages: -- Function Reference: -- |
In Windows, Unicode (UTF-8)-formatted log files are now supported for monitoring by log file trapping. |
User's Guide: 15. jevlogstart, 16. Action definition file for log file trapping Messages: -- Function Reference: -- |
The following JP1 events were added: 00003D05, 00003D06, 00003D07, 00003D08, 00003D09, 00003D0B, 00003D0C, 00003D0D, 00003D0E |
Messages: -- Function Reference: -- |
The extended attributes that are set to a JP1 event issued by the log file trapping function now include a monitor ID and monitor name. |
User's Guide: 17.3.1(28) Messages: -- Function Reference: -- |
The following items were added to the information that can be collected by the data collection tool:
|
User's Guide: 18.3.1(1), 18.3.1(2), 18.3.2(2) Messages: -- Function Reference: -- |
The number and size of the configuration management log files were changed. |
Messages: -- Function Reference: -- |
Descriptions about the parameters defined in the communication protocol settings file were added. |
User's Guide: H.10 Messages: -- Function Reference: -- |
Descriptions about the differences between the communication protocols of JP1/Base version 06-51 or earlier and JP1/Base version 06-71 or later were added. |
User's Guide: H.11 Messages: -- Function Reference: -- |
Descriptions about the communication protocols specified during cluster setup were added. |
User's Guide: H.12 Messages: -- Function Reference: -- |
Descriptions about the messages that are output when a request is denied by connection restriction were added. |
User's Guide: M.5 Messages: -- Function Reference: -- |
The following messages were added: KAJP1083-W, KAJP1084-I, KAJP1085-I, KAJP1086-W, KAJP1087-W, KAJP1350-I, KAJP1351-I, KAJP1352-E, KAJP1401-I, KAJP1402-E, KAJP1403-E, KAJP1404-I, KAJP1405-I, KAJP1406-E, KAJP1407-E, KAJP1408-I, KAJP1410-I, KAJP1411-E, KAJP1413-I, KAJP1414-I, KAJP1415-E, KAJP1416-I, KAJP1417-I, KAJP1418-I, KAJP1419-I, KAJP1420-I, KAJP1421-I, KAJP1422-I, KAJP1423-E, KAJP1424-I, KAJP1425-E, KAJP1426-I, KAJP1427-I, KAJP1428-I, KAJP1429-I, KAJP1430-I, KAJP1431-I, KAJP1432-E, KAJP1433-I, KAJP1434-E, KAJP1435-E, KNAM9001-I, KNAM9002-I, KNAM9003-E, KNAM9004-E, KNAM9005-E, KNAM9006-E, KNAM9007-E, KNAM9008-E, KNAM9009-E, KNAM9010-E, KNAM9011-W, KNAM9012-I, KNAM9013-E, KNAM9014-E, KNAM9015-W, KNAM9016-W, KNAM9020-I, KNAM9021-E, KNAM9022-I, KNAM9023-E, KNAM9024-I, KNAM9025-E, KNAM9026-I, KNAM9027-E, KNAM9028-W |
User's Guide: -- Messages: 1.2.1, 1.2.17, 1.4.1, 2.1, 2.17 Function Reference: -- |
The following messages were modified: KAJP1033-E, KAVA0443-E, KAVA0590-E, KAVA0592-E, KAVA0678-E, KAVA0901-E, KAVA0906-E, KAVA3650-I, KAVA6726-E, KAVB2027-E, KAVB3098-E, KAVB3107-E, KNAM3130-E, KNAM3170-E |
User's Guide: -- Messages: 2.1, 2.2, 2.4, 2.7, 2.9, 2.10, 2.15 Function Reference: -- |
Visual C++(R) 2012 was added to the supported compilers. |
User's Guide: -- Messages: -- Function Reference: 2.1.1(2) |
Old (3021-3-301-10(E)) |
New (3021-3-301-20(E)) |
---|---|
Part 1: Overview 1. Overview of JP1/Base 1.1 Overview of JP1/Base functionality |
Part 1: Overview 1. Overview of JP1/Base |
1.2 Managing users 1.3 Controlling the service start and stop sequences (Windows only) 1.4 Sending and receiving events with the event service 1.5 Converting log messages and event log data into JP1 events 1.6 Collecting and distributing definitions (JP1/IM only) 1.7 Health check 1.8 Local action 1.9 Support for system configurations 1.10 Communication protocols of JP1/Base 1.11 Managing JP1/Base as a JP1/Base administrator (UNIX only) 1.12 JP1/Base compatibility |
Part 2: Functions 2. Detail of JP1/Base Functions |
Part 2: Installation and Setup 2. Installation and Setup |
Part 3: Installation and Setup 3. Installation and Setup |
2.4.3 Setup for handling possible errors in JP1/Base |
4. Setup for handling possible errors in JP1/Base |
3 Setting Up JP1/Base for Use in a Cluster System |
5. Setting Up JP1/Base for Use in a Cluster System |
4. JP1/Base Communication Settings According to Network Configurations |
6. JP1/Base Communication Settings According to Network Configurations |
Part 3: Installation and Operation 5. Startup and Termination |
Part 4: Installation and Operation 7. Startup and Termination |
6. User Management Setup |
8. User Management Setup |
7. Setting the Service Start and Stop Sequences (Windows Only) |
9. Setting the Service Start and Stop Sequences (Windows Only) |
8. Setting up an Event Service Environment |
10. Setting up an Event Service Environment |
9. Setting Up the Event Converters |
11. Setting Up the Event Converters |
10. Collecting and Distributing Event Service Definitions (JP1/IM Only) |
12. Collecting and Distributing Event Service Definitions (JP1/IM Only) |
11. Setting Local Actions |
13. Setting Local Actions |
12. Modifying Settings During JP1/Base Operation |
14. Modifying Settings During JP1/Base Operation |
Part 4: Reference 13. Commands |
Part 5: Reference 15. Commands |
14. Definition Files |
16. Definition Files |
15. JP1 Events |
17. JP1 Events |
Part 5: Troubleshooting 16. Troubleshooting |
Part 6: Troubleshooting 18. Troubleshooting |
Appendixes |
Appendixes |