17.2 List of JP1 events output by JP1/Base
Event ID |
Occurrence |
Message |
---|---|---|
00003D00 |
When the event database is switched |
Event DB was switched from old-database-number to new-database-number. |
00003D04 |
When the event service restart function restarts an abnormally stopped process |
The event service was recovered by restarting an internal function. |
00003D05 |
When a specified amount of time has passed since event forwarding suppression was performed by the jevagtfw command |
Suppression of event-forwarding by the jevagtfw command has continued for total-suppression-time seconds. (server = host-name) |
00003D06 |
When event forwarding suppression is performed by using the jevagtfw command |
Event-forwarding from host-name is now being suppressed. |
00003D07 |
When event forwarding is suppressed by using the jevagtfw command |
The suppression of event-forwarding from host-name was stopped. |
00003D08 |
When received events are discarded by using the jevagtfw command |
The events received from host-name are now being discarded. |
00003D09 |
When discarding of received events is stopped by using the jevagtfw command |
Discarding of events received from host-name was stopped. |
00003D0B |
When threshold-based suppression of event-forwarding is started by detecting the occurrence of a large number of events based on a threshold |
host-name will start the threshold-based suppression of event-forwarding. (suppression ID = identifier) |
00003D0C |
When threshold-based suppression of event-forwarding is stopped by detecting convergence of a large number of events based on the threshold |
host-name stopped the threshold-based suppression of event-forwarding. (suppression ID = identifier) |
00003D0D |
When threshold-based suppression of event-forwarding is stopped by reloading (executing the jevreload command) or by stopping the event service |
host-name stopped all threshold-based suppressions of event-forwarding. |
00003D0E |
When a specified amount of time has passed since the threshold-based suppression of event-forwarding was started |
Suppression of event-forwarding by host-name has continued for total-suppression-time seconds. (suppression ID = identifier) |
00003A10#4 |
When a log file trap successfully connects to the event service at retry |
Event issuance was delayed because the system retried the log file trap. |
00003A20#4 |
When a log file trap cannot start log file monitoring |
Monitoring of the relevant log file cannot start. |
00003A21#4 |
When the retry count for reading application log files reaches the threshold and monitoring of the affected log file stops |
Monitoring will now stop because the specified number of retries was performed, but the relevant log file cannot be read. |
00003A22#4 |
When an application log file is in error status |
Monitoring of the relevant log file cannot continue. |
00003A25#4 |
When a log file trap starts, or begins monitoring its first log file |
The log file (file-type) will now be monitored. |
00003A26#4 |
When a log file trap switches its monitoring target during the monitoring process |
A different log file (file-type) is now being monitored. |
00003A27#4 |
When monitoring an UPD type log file, the status of the monitored log file becomes abnormal |
The log file (file-type) can no longer be properly monitored. |
00003A28#4 |
When more than the maximum number of files match a monitoring target name that includes a wildcard pattern |
Monitoring will now stop because the number of files corresponding to the monitoring file name exceeds the maximum. |
00003A29#4 |
When a log file trap cannot identify a log file to monitor |
Monitoring will now stop because no log files can be identified for monitoring. |
00003A2A#4 |
When the addition of a file causes the number of potential monitoring targets to approach the maximum |
number-of-files files correspond to the monitoring file name. |
00003A30 |
When a remote monitoring log (log file trap or event log trap) terminates abnormally and then restarts |
Log data from the termination previous to this startup might not be registered as JP1 events. |
00003A31 |
When a remote monitoring log (log file trap or event log trap) terminates abnormally in a state where a connection can be established with the event service |
The remote monitor stopped due to an error that prevents processing. |
00003A32 |
When a remote monitoring log (log file trap or event log trap) was able to reconnect to the event service |
Event issuance was delayed because the system retried the remote monitor. |
00003A71 |
When a log message for a Windows event is detected |
Windows event-log message |
00003A73 |
When a Windows event log failed to be acquired |
Acquisition of event log data failed. |
00003A74 |
When it is possible to monitor a Windows event log |
An event log can now be monitored. |
Event ID set in the ACTDEF parameter in the action definition file#4 |
When a record of an AP log file is detected |
Contents of one line of log file data |
00003A80 |
When an SNMP trap is detected |
NNM messages (For details, see I.5 JP1 events for SNMP trap conversion). |
00003FA0#1 |
When the command execution control receives an command execution request from the Execute Command window |
[host-name:JP1-user-name] Command execution started. |
00003FA1#1 |
When the command execution requested from the Execute Command window completes |
[host-name:JP1-user-name] Command execution ended normally. |
00003FA2#1 |
When command execution from the Execute Command window is not performed for some reason |
[host-name:JP1-user-name] Command execution ended abnormally. |
00003FA3#1 |
When the interval for issuing elapsed time events has been specified by the jcocmddef command. When the command execution requested from the Execute Command window or automated action is performed after the issuance interval of the elapse time event has been exceeded. |
[host-name] The execution time of command execution exceeded the regulation value (number sec) |
00003FA5#1 |
When a threshold of queued commands is specified in the jcocmddef command. When the number of queued commands has reached the threshold of the automated action |
In target-host-name, the number of queued commands requested from source-host-name has exceeded the threshold (xx). |
00003FA6#1 |
When a threshold of queued commands is specified in the jcocmddef command. When the threshold of queued commands for the automated action is specified as 0 |
In target-host-name, the number of queued commands requested from source-host-name has become 0. |
00004700#2 |
When an authentication server is blocked |
connection-sequence: authentication-server-name was successfully blocked. |
00004701#2 |
When an authentication server is unblocked |
connection-sequence: authentication-server-name was successfully unblocked. |
00004702#2 |
When all authentication servers are blocked |
All authentication servers are blocked. |
00004720#2 |
When the process ends abnormally |
component-name management-target-process-name has ended abnormally. |
00004721#2 |
When an attempt to start a process results in a timeout |
A component-name timeout occurred in management-target-process-name Processing continues. |
00004722#2 |
When an abnormally ended process is restarted |
Restart of the component-name management-target-process-name has finished. |
00004724#5 |
When JP1/Base has finished the startup process |
JP1/Base has started on the host host-name. |
00004725#5 |
When JP1/Base will be stopped |
JP1/Base will now end on the host host-name. |
00004740 |
When a monitored process ends abnormally |
function-name ended abnormally. |
00004741 |
When a monitored process has been unable to access (update) shared memory for a set time (SEVERITY:Error) |
function-name has been processing for nn seconds. |
00004742 |
When a monitored process has been unable to access (update) shared memory for a set time (SEVERITY:Warning) |
function-name has been processing for nn seconds. After passes of mm seconds, becomes error condition. |
00004743 |
When a monitored process that was unable to access (update) shared memory for a set time has recovered |
function-name has a normal status. |
00004747 |
When the health check function ends abnormally |
The health check function stopped because an error occurred. |
00004748 |
When an error (service inactivity) is detected during monitoring of a remote host |
Monitoring notification cannot be performed at host-name because service-name is not functioning. |
00004749 |
When an error (host unreachable) is detected during monitoring of a remote host |
Monitoring cannot be performed because a connection with host-name cannot be established. |
0000474A |
When a remote host becomes able to be monitored. When a monitoring target that was stopped starts again. |
host-name can now be monitored. |
0000474B |
When the shared memory is inaccessible |
The shared memory is locked. |
0000474C |
When the monitoring target host stops. |
The host host-name will not be monitored because it is not running. |
0000474D |
When the system cannot determine whether a monitoring target host has stopped or an error has occurred |
Monitoring cannot be performed because a connection cannot be established with host-name, which is not receiving stop notifications. |
0000474E |
When the system cannot reference the shared memory of one or more functions |
The status of function-name cannot be confirmed. |
0000474F |
When the system continues to be unable to reference the shared memory of one or more functions |
The status of function-name still cannot be confirmed. |
00004750 |
When the system is able to reference the previously inaccessible shared memory of one or more functions |
The status of function-name can now be confirmed. |
00002102#3 |
In UNIX, a JP1 event is output in one of the following cases:
|
None |
00002103#3 |
In UNIX, a JP1 event is output in one of the following cases:
In Windows, a JP1 event is output in one of the following cases:
|
None |
00002104#3 |
In UNIX, a JP1 event is output in one of the following cases:
|
Function name of the process |
00010B7F#3 |
In Windows or UNIX, when connected from the JP1/SES or JP1/AJS event service on a remote host |
None |
00004780 |
When a request to start execution of the action is accepted, or when the JP1 event (action start event) is registered |
An action execution start request was accepted. (action-execution-information) |
00004781 |
When command execution completed and the JP1 event (action end event) is registered |
An action has completed. (action-execution-information) |
00004782 |
When command execution is not completed and the JP1 event (action end event (not executable) is registered |
An action ended without being executed. (action-execution-information) |
00004783 |
When command execution is canceled and the JP1 event (action end event (cancellation)) is registered |
An action ended because it was cancelled. (action-execution-information) |