A.1 List of files and directories (in Windows)
In the following tables, the Base_Path indicates the installation-folder in this manual. The default location of Base_Path is as follows:
- In an x86 environment:
-
system-drive\Program Files\Hitachi\jp1base
- In an x64 environment:
-
system-drive\Program Files (x86)\Hitachi\jp1base
SystemDrive in the table is the same as system-drive used in the body of this manual.
Contents |
File name/folder name |
---|---|
Command storage folder |
Base_Path\bin\ |
Environment settings folder#1 |
Base_Path\conf\ shared-folder\jp1base\conf\ |
Language type settings file |
Base_Path\conf\jp1bs_param.conf shared-folder\jp1base\conf\jp1bs_param.conf |
Configuration definition file |
Base_Path\conf\route\jbs_route.conf shared-folder\jp1base\conf\route\jbs_route.conf |
JP1/IM function header file |
Base_Path\include\JevApi.h |
Log folder#2 |
Base_Path\log\ shared-folder\jp1base\log\ |
Folder for plug-in |
Base_Path\plugin\ |
Operating information storage folder |
Base_Path\sys\OPI\ shared-folder\jp1base\sys\OPI\ |
Readme file |
Base_Path\readme.txt |
Event database storage folder#3 |
Base_Path\sys\event\servers\#4 shared-folder\jp1base\event\#4 |
jp1hosts2 information |
Base_Path\sys\jp1hosts2\hostdb{0|1}.bin shared-folder\jp1base\sys\jp1hosts2\hostdb{0|1}.bin |
Log and temporary folder#2 |
Base_Path\sys\tmp\event\servers\#4 |
|
|
|
|
Tool folder |
Base_Path\tools\ |
|
|
|
|
|
|
Integrated trace log folder |
SystemDrive\Program Files\Hitachi\HNTRLib2\spool\ |
IT Report Utility (system information collection tool) folder |
|
Forwarding suppression status management folder |
Base_Path\conf\event\servers\default\suppress#4 |
Forwarding suppression information folder for each agent |
Base_Path\conf\event\servers\default\suppress\agent-host-name#4 |
- Organization of this subsection
(1) List of definition files (in Windows)
Function |
File name/folder name |
---|---|
Startup control |
|
|
|
Event service |
|
|
|
|
|
|
|
|
|
|
|
|
|
Event conversion |
|
|
|
|
|
|
|
|
|
|
|
Event service definition information collection and distribution |
|
|
|
|
|
User management |
|
|
|
|
|
|
|
|
|
Health check function |
|
|
|
|
|
Plugin service |
|
Operation log output function |
|
Process management |
|
|
|
Communication settings |
|
|
|
|
|
|
|
Local action function |
|
|
|
|
|
Collection of JP1/Base setup information in a single operation |
|
(2) List of log files (in Windows)
The table below lists the log files that JP1/Base outputs by default.
- Important note
-
JP1/Base also outputs some internal log files required for program maintenance. There is no need for users to reference or modify these internal log files. You might need to keep these files temporarily for data collection purposes if a system error occurs.
Log type indicates the type of log to which JP1/Base outputs data.
File name/folder name indicates the full path of the log file name when JP1/Base is installed using the default settings, and the log file name when JP1/Base is used in a cluster system.
Max. disk space indicates the maximum space the log file uses on a disk. If there are multiple log files, this column indicates the total.
File changing timing indicates when JP1/Base switches the output log files. Output destinations are changed when the indicated file size is reached or when the indicated event occurs. If there is only one log file, file changing causes that log file to be overwritten. If there are multiple log files and the maximum disk space has been reached, the file with the oldest update date is overwritten.
Log type |
File name/folder name |
Max. disk space |
File changing timing |
---|---|---|---|
Process management log |
|
384 KB |
128 KB |
|
384 KB |
128 KB |
|
|
384 KB |
128 KB |
|
Authentication server log |
|
2 MB |
256 KB |
|
2 MB |
256 KB |
|
|
2 MB |
256 KB |
|
|
2 MB |
256 KB |
|
Log of the authentication server setting command |
|
2 MB |
256 KB |
|
128 KB |
64 KB |
|
Log of the environment settings program |
|
128 KB |
64 KB |
Log of the logical host setting program |
|
2,000 KB |
1,000 KB |
|
128 KB |
64 KB |
|
SNMP trap converter log (for definitions) |
|
3 MB |
1 MB |
SNMP trap converter log (for monitoring) |
|
15 MB |
5 MB |
|
125 MB#5 |
125 MB#5 |
|
|
200 KB#5 |
None |
|
|
1 KB |
When the command is executed |
|
|
125 MB#5 |
125 MB#5 |
|
|
200 KB#5 |
None |
|
|
1 KB |
When the command is executed |
|
Common definition information log |
|
128 KB |
64 KB |
Log of jp1hosts information command |
|
128 KB |
64 KB |
User mapping command log |
|
128 KB |
64 KB |
Remote command log#4 |
|
2,304 KB |
768 KB |
|
2,304 KB |
768 KB |
|
|
2,304 KB |
768 KB |
|
|
2,304 KB |
768 KB |
|
|
2,304 KB |
768 KB |
|
|
2,304 KB |
768 KB |
|
|
2,304 KB |
768 KB |
|
|
2,304 KB |
768 KB |
|
|
2,304 KB |
768 KB |
|
|
2,304 KB |
768 KB |
|
Plug-in service log |
|
2,048 KB |
256 KB |
|
20 MB |
256 KB |
|
|
2,048 KB |
256 KB |
|
|
2,048 KB |
256 KB |
|
|
2,048 KB |
256 KB |
|
|
2,048 KB |
256 KB |
|
|
2,048 KB |
256 KB |
|
|
2,048 KB |
256 KB |
|
|
2,048 KB |
256 KB |
|
|
2,048 KB |
256 KB |
|
|
2,048 KB |
256 KB |
|
|
2,048 KB |
256 KB |
|
Configuration management log#4 |
|
20 MB |
4 MB |
Start sequence control log |
|
128 KB |
64 KB |
Event log trap trace log |
|
1,024 KB |
512 KB |
Trap log for event log traps |
|
4,096 KB |
1,024 KB |
Log of the health check function (local host monitoring) |
|
2,048 KB |
256 KB |
Log of the health check function (remote host monitoring) |
|
2,048 KB |
256 KB |
Health check command log |
|
2,048 KB |
256 KB |
Log of the health check API |
|
2,048 KB |
256 KB |
Log of the command for deleting shared memory used by the health check function |
|
2,048 KB |
256 KB |
Application error log |
|
5 MB |
5 MB |
Operation log |
|
68 MB#7 |
1,024 KB#7#8 |
Trace log for the event setting, centralized management, and acquisition command |
|
192 KB |
When the command is executed |
Trace log for event setting, centralized management, and distribution command |
|
192 KB |
When the command is executed |
Trace log of the event service |
|
5 MB#10 |
When the event service starts |
|
5 MB#10 |
When the event service starts |
|
Transfer error log of the event service |
|
5 MB#10 |
When the event service starts |
Error log of the event service |
|
2,500 KB#10 |
When the event service starts |
Log of the event service API. |
|
5 MB#11 |
1 MB#11 |
Socket communication connection log for compatibility with JP1/AJS |
|
2,000 lines#13 |
1,000 lines |
Log of JP1/SES-format event transmission and reception for compatibility with JP1/AJS |
|
2,000 lines#13 |
1,000 lines |
Error log of the log file trap |
|
A few hundred bytes#14 |
When the log file trap starts |
Log of the log file trap |
|
5 MB#15 |
1 MB#15 |
Log-file trap startup execution results log |
|
3 MB |
1 MB |
Remote monitoring log (log-file trap) |
|
10 MB |
2 MB |
Remote monitoring log (event log trap) |
|
10 MB |
2 MB |
Installation log |
|
128 KB |
At installation |
|
5 MB |
1 MB |
|
The output destination in the terminal service environment of the server OS changes as follows:
|
512 KB |
At installation |
|
Trace log for inter-process communication |
|
4 MB |
1 MB |
|
4 MB |
1 MB |
|
|
4 MB |
1 MB |
|
|
4 MB |
1 MB |
|
|
4 MB |
1 MB |
|
|
4 MB |
1 MB |
|
Error log of the command for collecting operating information |
|
5 MB |
1 MB |
Log for the operating information API |
|
5 MB |
1 MB |
Service management control log |
|
4 MB |
1 MB |
Trace log of the service management control |
|
4 MB |
1 MB |
Log of the service management control API |
|
4 MB |
1 MB |
Local action execution log |
|
1,024 KB#16 |
256 KB#16 |
Local action log |
|
2,048 KB |
256 KB |
|
2,048 KB |
256 KB |
|
|
2,048 KB |
256 KB |
|
Product information log |
|
5 MB |
1 MB |
JP1/Base communications base log |
|
5 MB |
1 MB |
Individual log for the setup information collection command |
|
2 MB |
1 MB |
Log for recording starting and stopping of forwarding suppression |
|
128 KB |
64 KB |
Trace log for the event-forwarding suppression command |
|
5 MB |
1 MB |