2.5 Preparations for using functions
To use a specific JP1/IM - Manager function, you must complete preparations appropriate to the type of function. The following methods are available for performing the preparations:
-
Executing commands
-
Specifying parameters in definition files
-
Specifying values for items in windows
The table below describes the prerequisite functions, preparations, and configuration methods for using each JP1/IM - Manager function. The settings that are not discussed in this table do not need to be specified because JP1/IM - Manager functions use their initial values. For details about the settings for each function, such as event conditions, see the details for the corresponding function.
|
Section |
Prerequisite function |
Preparation for using the function |
|---|---|---|
|
2.6 Functions provided by the IM database
|
-- |
Specify information such as the size and storage location of the IM database.
|
|
Set up the IM database by using the following command:
|
||
|
Enable the function by using the following command:
|
||
|
2.6 Functions provided by the IM database
|
-- |
Specify information such as the size and storage location of the IM database.
|
|
Set up the IM database by using the following command:
|
||
|
Enable the function by using the following command:
|
- Legend:
-
--: Not applicable
|
Section |
Prerequisite function |
Preparation for using the function |
|---|---|---|
|
2.6 Functions provided by the IM database
|
-- |
Specify information such as the size and storage location of the IM database.
|
|
Set up the IM database by using the following command:
|
||
|
Enable the function by using the following command:
|
||
|
2.8 Deploying and providing Intelligent Integrated Management Database function
|
-- |
Set Intelligent Integrated Management Database size or storage location, etc.
|
|
Set up Intelligent Integrated Management Database with the following command:
|
||
|
3.1 System management based on the system configuration information and JP1 events |
Integrated monitoring database Mapping of event source hosts |
Enable the function by using the following commands:
|
|
-- |
-- |
|
|
-- |
-- |
|
|
-- |
-- |
|
|
-- |
-- |
|
|
-- |
-- |
|
|
3.13 Distribution get capabilities (file download capabilities) |
-- |
-- |
|
3.14 Linking with other products (Intelligent Integrated Management Base) |
-- |
Collect the system configuration information of a linked product by using the following commands:
|
|
7. Automatic execution and manual execution of response action (JP1/IM - Agent linkage) |
-- |
-- |
|
Section |
Prerequisite function |
Preparation for using the function |
|---|---|---|
|
-- |
-- |
|
|
Integrated monitoring database IM Configuration Management Event-source-host mapping |
Enable the function by using the following command:
|
|
|
-- |
-- |
|
|
-- |
-- |
|
|
-- |
-- |
|
|
-- |
-- |
|
|
4.2.6 Defining filter conditions
|
-- |
Use the following command to change from extended mode to basic mode: jcochcefmode command (option: -m normal) |
|
4.2.6 Defining filter conditions
|
-- |
Change JP1/Base regular expressions to extended regular expressions. For details, see the JP1/Base User's Guide. |
|
Use the following command to change from basic mode to extended mode:
|
||
|
-- |
Enable the function by using the following command:
|
|
|
Integrated monitoring database |
Enable the function by using the following command:
|
|
|
4.4.10 Suppressing repeated-event display by the consolidated display of repeated events |
-- |
Disable the repeated event monitoring suppression function by using the following command:
Enable the function in the following window:
|
|
Integrated monitoring database |
Enable the function by using the following command:
|
|
|
-- |
-- |
|
|
Integrated monitoring database |
Enable the function by using the following command:
|
|
|
Integrated monitoring database |
-- |
|
|
Integrated monitoring database |
Enable the function by using the following command:
|
|
|
-- |
-- |
|
|
Integrated monitoring database |
Enable the function by using the following command:
|
|
|
-- |
-- |
|
|
4.13 Displaying program-specific extended attributes and specifying them in event conditions |
-- |
-- |
|
-- |
-- |
|
|
-- |
-- |
|
|
Integrated monitoring database |
-- |
|
|
Integrated monitoring database |
Enable the function in the following window:
|
|
|
-- |
-- |
|
|
-- |
-- |
|
|
-- |
-- |
|
|
4.19.3 Executing commands on managed hosts from JP1/IM - View |
-- |
-- |
|
-- |
-- |
|
|
4.19.5 Inheriting event information when a command is executed |
-- |
-- |
|
-- |
In the following definition file, specify the information needed for email transmission, such as the mail server's host name, authentication method, authentication account name, and password:
|
|
|
Chapter 6. Command Execution by Automated Action (JP1/Base linkage) |
-- |
-- |
- Legend:
-
--: Not applicable
|
Section |
Prerequisite function |
Preparation for using the function |
|---|---|---|
|
-- |
Set up a monitoring object database by using the following command:
|
|
|
Enable the function by using the following command:
|
||
|
Central Scope |
-- |
|
|
Central Scope |
-- |
|
|
Central Scope |
-- |
|
|
Central Scope |
-- |
|
|
Central Scope |
-- |
|
|
Central Scope |
-- |
|
|
Central Scope |
-- |
|
|
Central Scope |
-- |
- Legend:
-
--: Not applicable
|
Section |
Prerequisite function |
Preparation for using the function |
|---|---|---|
|
Chapter 8. System Hierarchy Management Using IM Configuration Management |
IM Configuration Management database |
Enable the function by using the following command:
|
|
IM Configuration Management |
-- |
|
|
IM Configuration Management |
-- |
|
|
IM Configuration Management |
-- |
|
|
IM Configuration Management |
-- |
|
|
IM Configuration Management |
-- |
|
|
IM Configuration Management |
To perform remote monitoring, configure the OSs on both the manager host and the monitored host. For details about the OS settings, see the following:
|
|
|
IM Configuration Management |
-- |
|
|
8.8 Exporting and importing IM Configuration Management information |
IM Configuration Management |
-- |
- Legend:
-
--: Not applicable
|
Section |
Prerequisite function |
Preparation for using the function |
|---|---|---|
|
-- |
-- |
|
|
-- |
Enable the function by using the following definition file:
|
- Legend:
-
--: Not applicable
|
Section |
Prerequisite function |
Preparation for using the function |
|---|---|---|
|
-- |
Define the URL for JP1/Service Support's WWW page used for registering incidents:
Define the attributes or strings of JP1 events to be registered as incidents in the following file:
|
|
|
Central Console's event guide |
-- |
|
|
-- |
-- |
|
|
-- |
-- |
|
|
10.5 Linking with another system that uses the REST API of JP1/AO |
-- |
-- |
|
Launching linked products by monitor startup |
-- |
|
|
Tool Launcher |
-- |
|
|
Central Console's event guide |
-- |
|
|
Automated action (mail transmission) |
-- |
|
|
-- |
Define the URL for the target JP1/PFM - Web Console.
|
|
|
Launching linked products by monitor startup |
-- |
|
|
Tool Launcher |
-- |
|
|
Linking with BJEX or JP1/AS |
-- |
Enable the function by using the following command:
|
- Legend:
-
--: Not applicable
|
Section |
Prerequisite function |
Preparation for using the function |
|---|---|---|
|
-- |
Specify whether to output data to the operation log, the output destination, the size of the operation log, and the maximum number of files that can be saved.
|
- Legend:
-
--: Not applicable