A.5 Lists of properties
The following table lists and describes the properties that can be set by the configuration file. Note that the settings in the configuration file are applied after the JP1/IT Desktop Management 2 service is restarted.
|
Property |
Description |
Setting value |
Default |
|---|---|---|---|
|
Capacity_OplogDBPathWarningThreshold |
Warning threshold of the free space of the operation log database folder |
0 to 1,048,576 MB |
10% of Required Capacity of the operation log database |
|
Capacity_OplogDBPathErrorThreshold |
Error threshold of the free space of the operation log database folder |
0 to 1,048,576 MB |
3% of Required Capacity of the operation log database |
|
Capacity_OplogBKPathWarningThreshold |
Warning threshold of the free space of the operation log storage folder (when periodic export is disabled) |
0 to 1,048,576 MB |
The seven days total of the guideline values of the disk space required for the operation log storage folder |
|
Capacity_OplogBKPathErrorThreshold |
Error threshold of the free space of the operation log storage folder (when periodic export is disabled) |
0 to 1,048,576 MB |
The three days total of the guideline values of the disk space required for the operation log storage folder |
|
Capacity_OplogBKPathWarningThreshold_ExportEnabled |
Warning threshold of the free space of the operation log storage folder (when periodic export is enabled) |
0 to 1,048,576 MB |
The seven days total of the guideline values of the disk space required for the operation log storage folder |
|
Capacity_OplogBKPathErrorThreshold_ExportEnabled |
Error threshold of the free space of the operation log storage folder (when periodic export is enabled) |
0 to 1,048,576 MB |
The three days total of the guideline values of the disk space required for the operation log storage folder |
|
Capacity_DataPathWarningThreshold_OpLogEnabled_ExportDisabled |
Warning threshold of the free space of the data folder (when operation log is enabled and periodic export is disabled) |
0 to 1,048,576 MB |
50% of the guideline value of the disk space required for the data folder used as the operation log buffer + 3,072 MB |
|
Capacity_DataPathErrorThreshold_OpLogEnabled_ExportDisabled |
Error threshold of the free space of the data folder (when operation log is enabled and periodic export is disabled) |
0 to 1,048,576 MB |
30% of the guideline value of the disk space required for the data folder used as the operation log buffer + 500 |
|
Capacity_DataPathWarningThreshold_OpLogEnabled_ExportEnabled |
Warning threshold of the free space of the data folder (when operation log is enabled and periodic export is enabled) |
0 to 1,048,576 MB |
50% of the guideline value of the disk space required for the data folder used as the operation log buffer + 3,072 MB |
|
Capacity_DataPathErrorThreshold_OpLogEnabled_ExportEnabled |
Error threshold of the free space of the data folder (when operation log is enabled and periodic export is enabled) |
0 to 1,048,576 MB |
30% of the guideline value of the disk space required for the data folder used as the operation log buffer + 500 |
|
State_AfterAgentUninstalling#1 |
Specifies whether uninstallation of JP1/IT Desktop Management 2 - Agent is treated as disposal of a device, or as uninstallation of JP1/IT Desktop Management 2 - Agent. |
0: Treated as an uninstallation. 1: Treated as disposal of a device. |
0 |
|
Report_Data_MakeTime |
Time for creating totalization data for the report |
00:00 to 23:59 |
23:00 |
|
Report_Digest_MakeTime |
Time for creating a digest report |
00:00 to 23:59 |
06:00 |
|
DB_MentenanceTime |
Time for database maintenance |
00:00 to 23:59 |
05:00 |
|
ChangeHistory_GetTime |
Time for acquiring the revision history |
00:00 to 23:59 |
00:00 |
|
OpLog_DB_DeleteTime |
Time for maintenance of the operation log database in which operation logs were automatically acquired |
00:00 to 23:59 |
01:00 |
|
UNIX_Software_Manage |
Specifies whether the software information in an agent for UNIX or Mac is managed. |
YES: Managed. NO: Not managed. |
NO |
|
DeviceAutoMaintenanceTime |
Time for starting maintenance processing if device maintenance is enabled |
00:00 to 23:59 |
23:00 |
|
AgentStartMenu_Display |
Settings for the display of start menu items for an agent due to distribution of Agent Installer and agents |
ON: All start menu items for the agent are displayed. OFF: None of the start menu items for the agent are displayed.#2 SELECT:xxx,xxx,... : Select the start menu items to be displayed. The following lists the menu items that can be specified for xxx. To specify multiple menu items, separate them by using commas (,).
For example, if you want to display Package Setup Manager and Register USB Device, specify the following: SELECT:PSM,ATUSB |
None |
|
SDM_Mapping_Name |
Specify whether to map the smart device name registered in JP1/IT Desktop Management 2 - Smart Device Manager as the host name, computer name, or device name displayed in the operation window of JP1/IT Desktop Management 2. |
0: Do not map#3 1: Map |
1 |
|
OfflineRegistration_StatusUnknown |
Specifies the device status to be set for a computer that is managed offline when its device information is acquired for the first time. |
ON: Changes the device status to Unknown. OFF: Changes the device status to Stop. Note that, if the device status is Warning, Warning will be displayed. |
OFF |
|
Mgrsrv_jdnmssecurityctrl |
Setting for security judgment |
10 This property must be set when the number of managed computers is 30,000 to 50,000. |
5 |
|
Mgrsrv_Patch_AutoPackageKind |
Set whether to automatically acquire update program or not |
0: do not automatically acquire update program 1: automatically acquire update program |
1 |
|
RollUpPatch_ExpirationDate |
Expiration date for a monthly rollup judgment. The security judgment for a monthly rollup is no longer made after the specified date. The specified value is interpreted as a date in the Eastern Standard Time in US. |
Specify 0 or a value in the format: nth-week,day-of-week. nth-week can be 1 to 5. day-of-week can be 1 to 7. The day-of-week value represents: 1: Sunday 2: Monday 3: Tuesday 4: Wednesday 5: Thursday 6: Friday 7: Saturday When 0 is specified, no expiration date is set on the judgment. |
2, 3 (Second Tuesday) |
|
RestAPIProtocol |
Setting for the communication protocol using the API |
0: HTTP protocol 1: HTTPS protocol |
0 |
|
RestAPIInventoryUpdatePriorityLow |
Setting that specifies the priority for updating the device information collected via the API |
Select one of the following methods so that the priority for updating the device information collected via the API is set to be one level higher than the priority for updating the device information collected by the specified method: Shares: Device information collected via a Windows administrative share SNMP: Device information collected by SNMP AD: Device information collected from Active Directory MDM: Device information collected by MDM linkage ARP: Device information collected by ARP If you do not specify this property, the priority for updating the device information collected via the API is set to priority 3 as described in (14) Updating device information. |
SNMP |
|
OpLog_ExportSourceDateAndTime |
Specifies whether to additionally output the operation date and time (agent), operation date and time (UTC), and time zone of the source agent when the operation logs are exported. |
OFF: The operation date and time of the agent are output with the time zone of the management server. ON: Additional information on when the operation logs of the agent were collected (Operation Date/Time (Agent), Operation Date/Time (UTC), and Time Zone) is output. |
OFF |
|
Mgrsrv_jdnmssecurityctrl_L#4 |
Specifies the number of processes that perform security judgment. |
1 to 20 |
10 |
|
Security_Judgement_Execution_Opportunity_L#4 |
Execution timing for the security judgment when the large-scale management option is enabled. If this is set to ALL, the security judgment is executed when data related to the security judgment is updated. However, this increases the load on the server CPU, and may slow down the registration of device information collected from agents and the like or operations on the management window. For details about tuning the settings for collecting device information, see the manual JP1/IT Desktop Management 2 Administration Guide. |
SCH: During scheduled judgments ALL: When data related to the security judgment is updated |
SCH |
|
Inventory_DBUpdate_Performance_Mode#5 |
Improve the DB performance for updating the device information. When enabled, the property helps reduce the time before a USB device is displayed in the management window when registered, because the information on the device is handled preferentially over device information collected from agent, agentless, API-controlled, and other devices. It can also save time before the device information mentioned above is registered in JP1/IT Desktop Management 2 and the security judgment is performed. |
0: Disable 1: Enable |
0 |
|
Event_Deterrence_EventNumber_L#4 |
Specifies the event number for suppressing event output. Specify the event numbers of events to suppress event output for, separated by commas. Leave this value blank if you do not want to suppress event output.
|
1129 or blank |
1129 |
|
Event_Deterrence_EventNumber#5 |
Specifies the event number for suppressing event output. Specify the event numbers of events to suppress event output for, separated by commas. Leave this value blank if you do not want to suppress event output.
|
1129 or blank |
None |
|
Software_Licenses_Totalization_Method |
Setting of timing for the compilation of software license information. This property sets the timing for the compilation of software license information executed when inventory information about the installed software is notified from managed devices. For a management server, the more managed devices there are, the slower installed software information is reflected for devices. Furthermore, as the number of software licenses in use is compiled after the device installed software information is updated, the number will be inaccurate for a time.
|
EACH: Executes the compilation of software license information each time device information is updated. SCH: Executes the compilation of software license information every three minutes. |
EACH |
- #1
-
If no uninstallation notification can be received from an agent, the device information is not changed as is done in older versions. In such a case, take actions as necessary (for example, by deleting the device information). For devices for which Network Monitor is enabled, the device inventory is not deleted. After disabling Network Monitor, you need to delete the device inventory manually.
- #2
-
In the case of the Citrix XenApp and Microsoft RDS server, specify all the start menus not to be displayed because displaying of the start menus of agents is not supported.
- #3
-
If 0 is specified, the JP1/IT Desktop Management 2 operation window displays the following information as the host name, computer name, and device name: a combination of the user name, phone number, and model name in the smart-device information obtained from JP1/IT Desktop Management 2 - Smart Device Manager, separated with colons (for example, BobBrown:09012345678:iPhone).
- #4
-
This is enabled only if you enabled the large-scale management option when installing the management server.
- #5
-
This is enabled only if you disabled the large-scale management option when installing the management server.