Hitachi

JP1 Version 12 JP1/SNMP System Observer Description, Operator's Guide and Reference


4.6.3 Set Threshold Value window

The Set Threshold Value window sets thresholds for a process or child process. A threshold indicates the number of processes or child processes that can be executed at one time. The following figure shows the Set Threshold Value window.

Figure 4‒69: Set Threshold Value window

[Figure]

The items to be set are:

Threshold Value
Lower

Specify the lower limit for the number of processes that can be executed at one time. Specify a value that is equal to or smaller than the upper limit. The default is 1.

Upper

Specify the upper limit for the number of processes that can be executed at one time. Specify a value that is equal to or greater than the lower limit. If you do not wish to set an upper limit, specify 9999. The default is 1.

The following are examples for setting threshold values:

Example 1: When 3 is specified as the upper limit of the threshold, and 1 as the lower limit:

Normal if the number of running processes is from 1 to 3

Critical if the number of running processes is 0 or 4 or greater

Example 2: When 0 is specified as the upper limit of the threshold, and 0 as the lower limit:

Normal if the number of running processes is 0

Critical if the number of running processes is 1 or greater