2.1.2 Starting ITSLM - UR
To start ITSLM - UR, start the ITSLM - UR service and set its service status to Start.
You can have the ITSLM - UR service start automatically when the OS starts if you set it up in the OS to start automatically. If ITSLM - Manager and ITSLM - UR are installed on the same host and you want to start the service automatically, you must use JP1/Base's startup control to set the ITSLM - Manager services to start first when the OS starts. For details about using JP1/Base for startup control, see the Job Management Partner 1/Base User's Guide.
If you have not set up the service to start automatically or when you are restarting ITSLM - UR, you must start ITSLM - UR by starting the service manually.
This subsection explains how to start ITSLM - UR manually. If you run ITSLM - UR in a cluster system, use the cluster software to start ITSLM - UR.
- Organization of this subsection
(1) Before you start
-
Verify that ITSLM - UR has been set up.
For details about how to set up ITSLM - UR, see 5.1.7 Setting up ITSLM - UR.
-
Verify that ITSLM - Manager is running.
For details about how to start ITSLM - Manager, see 2.1.1 Starting ITSLM - Manager.
(2) Procedure
To start ITSLM - UR:
-
From the Windows Start menu, select Administrative Tools, and then Services.
-
Start the ITSLM - UR service JP1/ITSLM - User Response Service (service name: JP1_ITSLM_UR_Service).
Once the status of the service is set to Start, ITSLM - UR has started.
(3) Supplementary information
-
To restart ITSLM - UR, perform (2) Procedure after ITSLM - UR has terminated.
-
If you restart ITSLM - UR while monitored services are being monitored, the restarted ITSLM - UR starts monitoring automatically.
For details about starting monitoring, see 4.2.1 Starting monitoring.
-
If you have changed the system configuration (including when you restore the system configuration after a change) while ITSLM - UR is running, you must restart ITSLM - UR.