In JP1/Software Distribution Manager, you can display the execution status of only certain jobs. This enables you to view only jobs in which an error occurred, or only jobs that completed successfully, for example. To display only those jobs with a particular execution status, from the View menu, select Filter and specify the display condition in the Filter dialog box. After you have displayed the jobs in the particular execution status, you can display all jobs by going to the View menu and selecting All Job Types.
The items you can specify in the Filter dialog box are explained below.
Figure 8-47 Filter dialog box
![[Figure]](FIGURE/JOB0500.GIF)
- Jobs to display
- Specifies the type of jobs to be displayed in terms of execution destination
- All jobs
Displays all jobs.
- Host group job
Displays jobs with hosts specified as the destination.
- ID group job
Displays the jobs with ID groups specified as the destination.
- All-lower-clients job
Displays the jobs that specify all lower clients as the destination
- Job type
- Displays the jobs of the selected job types. To select a job type, select the check box to the left of the job type. In the default setting, all job types are selected.
- Job execution status
- Displays the jobs with selected execution statuses. To select a job execution status, select the check box to the left of the job execution status. This item is available only when you selected List Jobs from the View menu in the Job Status window.
- If you select more than one execution status, JP1/Software Distribution displays all the jobs in any of the selected execution statuses.
- The following describes each execution status:
- All successfully completed
Displays jobs whose execution was completed successfully.
- Error in job(s) sent client
Displays jobs resulting in an error.
- Client rejected a package installation
Displays Send package, allow client to choose jobs whose package-installation information was deleted by the relay system or client's Package Setup Manager.
- Installation/collection job(s) waiting for client response
Displays jobs waiting for remote installation or collection at the relay manager/system or client.
- Job(s) are running/registering/waiting/startup failure
Displays jobs being executed or jobs with ID groups specified that are being registered or waiting for execution.
- Job(s) have not been sent to client
Displays scheduled jobs that have not been executed yet.
- Now being deleted
Displays jobs that are being deleted at the relay manager/system or client.
- Job status
- Displays the details of the jobs with the selected execution statuses. To select a job status, select the check box to the left of this option. This item is available only when you choose All Job Details from the View menu in the Job Status window.
- If you select more than one status, JP1/Software Distribution displays the details of all the jobs in any of the selected job statuses.
- The following describes each status:
- Completed
Displays the details of jobs whose execution was completed successfully.
- Error
Displays the details of jobs resulting in an error.
- Installation rejected
Displays the details of Send package, allow client to choose jobs whose package-installation information was deleted by the relay system or client's Package Setup Manager.
- Suspended/resumed
Displays the details of jobs whose execution is temporarily suspended due to a suspension instruction or jobs whose execution is about to be resumed based on a resumption instruction.
- Waiting for installing/collecting
Displays the details of jobs waiting for remote installation or collection at the relay manager/system or client.
- Running/registering/waiting/startup failure
Displays the details of jobs being executed or jobs with an ID group specified that are being registered or waiting for execution.
- Waiting for transmission
Displays the details of scheduled jobs that have not been executed yet.
- Now being deleted
Displays jobs that are being deleted at the relay manager/system or client.
- Execution date/time
- You can specify a job execution date and time as the condition. To specify an execution date and time, select the check box to the left of this option. You can also specify a date/time range. To do this, select a desired range from the pull-down list:
- Before
The range is before the date and time set to the left of this item.
- On or before
The range is on or before the date and time set to the left of this item.
- After
The range is after the date and time set to the left of this item.
- On or after
The range is on or after the date and time set to the left of this item.
- On
Select this option to set a specific date and time to the left of this item.
- Not on
The range excludes the specified date and time.
- From/to
The range is from the date and time set to the left of this item to the date and time set to the right of this item.
- Scheduled execution date/time
- You can specify a scheduled job execution date as the condition. To do this, select the button to the left of the option. The procedure for specifying a data/time range is the same as for the execution date and time.
- Execution time limit
- You can specify a job execution time limit as the condition. To do this, select the button to the left of the option. The procedure for setting a date/time range is the same as for the execution date and time.
All Rights Reserved. Copyright (C) 2009, 2013, Hitachi, Ltd.
Copyright, patent, trademark, and other intellectual property rights related to the "TMEng.dll" file are owned exclusively by Trend Micro Incorporated.