13.3 Actions to be taken when a disk is low on free space
If the amount of free space on the disk that contains the database for JP1/ITDM2 - SDM (Smart Device Manager) is insufficient, new data cannot be added and management with correct information is disabled. To avoid such problems, it is necessary to monitor the free space available on the disk that JP1/ITDM2 - SDM (Smart Device Manager) uses, and to take action when this space runs low.
You can check the free space on the disk that JP1/ITDM2 - SDM (Smart Device Manager) uses from the Database and Disk Usage panel in the Home module. If the free space on the disk is becoming low, take action to increase free space.
For example, you can perform the following:
-
Delete unnecessary data from the disk.
-
If you are using a logical drive, increase its storage capacity by expanding the disk.
If you cannot provide free disk space, replace the smart device manager. You need to back up the database before replacing the smart device manager. After replacing the smart device manager, install JP1/ITDM2 - SDM (Smart Device Manager), and then restore the database from the backup file.
Related topics