3.14 Flow of installing JP1/ITDM2 - SDM (Smart Device Agent) on a smart device

The following describes the flow of installing JP1/ITDM2 - SDM (Smart Device Agent) on a smart device used in the organization, and starting the smart device management.

1. Define security principles.

2. Register security rules.

3. Understand the smart devices in your organization.

   Create a smart device management ledger. Based on the ledger information, determine the smart devices to be managed by JP1/ITDM2 - SDM. In addition, obtain registration information of the smart devices.

4. Set up a provisioning.

5. Check the root certificates for SSL communication preinstalled on the smart device.

6. Set the root certificates for SSL communication on the smart device (only when necessary certificates are not preinstalled).

7. Register smart device information in JP1/ITDM2 - SDM.

8. Use JP1/ITDM2 - SDM to set the password for SSL communication with the APNs server.

9. Plan JP1/ITDM2 - SDM (Smart Device Agent) installation.

   Install JP1/ITDM2 - SDM (Smart Device Agent) in either of the following ways:

   • The administrator installs JP1/ITDM2 - SDM (Smart Device Agent), and then distributes it to the user.

   • After distributing the smart device to the user, ask the user to install JP1/ITDM2 - SDM (Smart Device Agent).

10. Install JP1/ITDM2 - SDM (Smart Device Agent) on the smart device.

    The administrator or user installs JP1/ITDM2 - SDM (Smart Device Agent) on the smart device.

11. Confirm that JP1/ITDM2 - SDM (Smart Device Agent) is installed.

    If JP1/ITDM2 - SDM (Smart Device Agent) is installed on the smart device, inventory information is periodically reported to JP1/ITDM2 - SDM. If inventory information has not been sent from the managed smart device for a specified period of time, an event is issued. Therefore, by checking whether an event was issued, you can understand whether JP1/ITDM2 - SDM (Smart Device Agent) is installed on smart device.

12. Send a notification email indicating that JP1/ITDM2 - SDM (Smart Device Agent) must be installed (only for users who have not installed JP1/ITDM2 - SDM (Smart Device Agent).

Related Topics

• 2.4.1 Types of security rules

• 3.14.1 Defining the organization's security principles

• 3.14.2 Provisioning settings

• 3.14.3 Procedure for checking the root certificates for SSL communication preinstalled on the smart device

• 3.14.4 Procedure for setting up the root certificate for SSL communication on the Android device

• 3.14.5 Procedure for setting root certificates for SSL communication on the iOS device

• 3.14.6 Procedure for installing JP1/ITDM2 - SDM (Smart Device Android Agent) on an Android device (using the Android device only)

• 3.14.7 Procedure for installing JP1/ITDM2 - SDM (Smart Device Android Agent) on an Android device (for a PC)

• 3.14.8 Procedure for installing JP1/ITDM2 - SDM (Smart Device iOS Agent) on an iOS device

• 7.1 Using security policies

• 7.2 Using Android policies

• 7.3 Using iOS profiles

• 8.1 Registering smart devices in JP1/ITDM2 - SDM

Organization of this section

• 3.14.1 Defining the organization's security principles

• 3.14.2 Provisioning settings

• 3.14.3 Procedure for checking the root certificates for SSL communication preinstalled on the smart device

• 3.14.4 Procedure for setting up the root certificate for SSL communication on the Android device

• 3.14.5 Procedure for setting root certificates for SSL communication on the iOS device

• 3.14.6 Procedure for installing JP1/ITDM2 - SDM (Smart Device Android Agent) on an Android device (using the Android device only)

• 3.14.7 Procedure for installing JP1/ITDM2 - SDM (Smart Device Android Agent) on an Android device (for a PC)

• 3.14.8 Procedure for installing JP1/ITDM2 - SDM (Smart Device iOS Agent) on an iOS device

To Page Top