19.1 List of events

Event number	Severity	Type	Event
0	Information	Settings	The device has been discovered. Device type=`device-type` The following is displayed for `device-type`. PC Server Network Device Printer Smart Device Storage USB Device Display Peripheral Device Other Device Unknown (User definition)
1	Information	Settings	The device has been added as a managed node. Device type=`device-type` The following is displayed for `device-type`. PC Server Network Device Printer Smart Device Storage USB Device Display Peripheral Device Other Device Unknown (User definition)
2	Information	Settings	The status of the device has been changed to Ignored.
3	Information	Settings	The device has been deleted.
4	Warning	Settings	Failed to register the device as a managed node. You have already reached the limit of licenses available for managed devices. Purchase licenses based on the number of managed devices. Device type=`device-type` The following is displayed for `device-type`. PC Server Network Device Printer Smart Device Storage USB Device Display Peripheral Device Other Device Unknown (User definition)
5	Warning	Settings	The agent has been uninstalled. Confirm if agent uninstallation (from the computer) is allowed.
6	Information	Settings	The agent settings have been updated. Agent setting name=`agent-configuration-name`
7	Information	Inventory	Memory capacity has been changed. Before change=`memory-capacity` After change=`memory-capacity`
8	Information	Inventory	Hardware has been added. Interface type=`interface-type` Model name=`model-name` Capacity=`capacity`
9	Information	Inventory	Hardware has been deleted. Interface type=`interface-type` Model name=`model-name` Capacity=`capacity`
19	Warning	Error	Failed to obtain detailed information from `function-name`. Confirm the settings (authentication information, discovery range) and the operational status of the service (JP1_ITDM2_Agent Control). Or confirm the machine status of the target client. After confirmation, retry device discovery and inventory collection. If the problem persists, collect troubleshooting information (launch [Command] and execute getlogs command), and contact Support Service. Cause of error=`cause-of-error` IP address=`IP-address` The following is displayed for `function-name`. Device Discovery Inventory Collection On-demand inventory collection The following is displayed for `cause-of-error`. User authentication failed Administrative share is not accessible An error occurred in administrative share The client is not accessible A communication error occurred An error occurred in the client Discovery program is running on the client Discovery program did not finish
22	Information	Settings	The agent installer has been launched. Model name=`model-name` Version=`version` IP address=`IP-address`
56	Information	Security	Message notification to the user has been sent.
57	Warning	Error	Failed to send a message notification to the user. Collect troubleshooting information (launch [Command] and execute getlogs command), and contact Support Service.
58	Information	Security	Connection to the network has been denied.
60	Information	Security	Network connection has been allowed.
62	Information	Security	Antivirus software settings have been changed. Product name=`product-name` Engine version=`engine-version` File definition version=`file-definition-version`
63	Information	Security	Update information has been added. Update information=`update-information`
69	Information	Security	Security policy has been added. Security policy name=`security-policy-name`
70	Information	Security	Security policy content has been updated. Security policy name=`security-policy-name`
71	Information	Security	Security policy has been deleted. Security policy name=`security-policy-name`
72	Information	Security	Security policy assignment has been changed. Security policy name=`security-policy-name` Assigned group=`assigned-group`
75	Information	Security	Software start-up has been blocked. Account name=`account-name` Account login=`account-login` Product name=`product-name` Product version=`product-version` File name=`file-name`
76	Information	Security	Printing operation has been blocked. Account login=`account-login` Printer name=`printer-name` Printing job name=`printing-job-name`
77	Information	Security	Printing operation has been unblocked. Account login=`account-login`
78	Warning	Error	Failed to unblock the printing operation. Confirm whether the password is correct, and then retry unblocking the printing task. Account login=`account-login`
200^#	Critical	Error	An error occurred in the operation (JP1_ITDM2_Service). The operation (JP1_ITDM2_Service) will be stopped. Collect troubleshooting information (launch [Command] and execute getlogs command), and contact Support Service. ErrCode=`error-code`
208	Warning	Error	An error occurred while updating received files. A temporary error occurred while received files were being updated. The update to the received files will be retried.
209	Warning	Error	An error occurred in `function-name`. An internal error occurred in `function-name` process. If the error is repeated, then collect troubleshooting information and contact Support Service. Error code=`error-code` IP address=`IP-address` The following is displayed for `function-name`. Device Discovery Inventory Collection On-demand inventory collection Agent Deployment
210	Warning	Error	Failed to update. Error occurred while updating received files. Failed to update file information because of an error, which occurred during file update. Temporary resource insufficiency might have occurred. If the error is repeated, then collect troubleshooting information (launch [Command] and execute getlogs command), and contact Support Service.
211	Warning	Error	Failed to update the file. The file format was invalid. Failed to update file information because of invalid file format. There is a possibility of special characters (control code etc.) in the data of the acquisition origin. Please remove special characters if you can edit the data of the acquisition origin, and acquire information again. If the error is repeated, then collect troubleshooting information (launch [Command] and execute getlogs command), and contact Support Service.
212	Warning	Error	Failed to update the file. The file size exceeds the database update limit. Failed to update information due to huge data. If the error is repeated, then collect troubleshooting information (launch [Command] and execute getlogs command), and contact Support Service.
1003	Warning	Settings	The agent's operation has been stopped. The agent's operation has been stopped. The agent files might have been deleted (by the user).
1004	Information	Inventory	New software has been discovered. Software name=`software-name` Version=`version`
1006	Warning	Error	Failed to stop the prohibited operation. Service name=`service-name`
1007	Information	Security	Antivirus software information has been added.
1008	Information	Settings	Agent patch has been updated. Agent version=`agent-version`
1009	Information	Settings	Action definition file (manager) has been updated.
1011	Information	Security	A device used to suppress operation was disconnected. Logon account name = `logon-account-name` Drive name = `drive-name` Drive type = `drive-type` Device name = `device-name` Device instance ID = `device-instance-ID` Device category = `device-category` The following is displayed for `drive-type`: Unknown Local Disk Network Drive Removable Disk CD-ROM Drive RAM Disk The following is displayed for `device-category`: Unknown USB device Internal CD or DVD drive Internal floppy disk drive IEEE1394 device Internal SD card Bluetooth device Imaging device Windows portable device
1016	Information	Distribution (ITDM-compatible)	Mandatory software will be distributed. Mandatory software is not installed. Distribution of the software has been requested based on the policy settings. The execution status of the task can be confirmed through `task-name`.
1017	Information	Distribution (ITDM-compatible)	Prohibited software will be deleted. The detected software is an unauthorized software, and will be deleted based on the policy settings. Execution status of the task can be confirmed through `task-name`.
1018	Warning	Distribution (ITDM-compatible)	Package distribution task has been terminated abnormally. Task `task-name` for agent `target-agent-host-name` has been terminated abnormally. Cause of error: `cause-of-error` The following is displayed for `cause-of-error`. Insufficient hard disk free space. Failed to access the file or folder. Specified computer was excluded from task execution target. An internal error has occurred. Cannot unzip package. Failed to start the command. Command processing has stopped. Execution command has terminated abnormally.
1019	Warning	Distribution (ITDM-compatible)	Unistallation task has been terminated. Task `task-name` for agent `target-agent-host-name` has been terminated abnormally. Cause of error: `cause-of-error` The following is displayed for `cause-of-error`. Insufficient hard disk free space. Failed to access the file or folder. Specified computer was excluded from task execution target. An internal error has occurred. Failed to start the command. Command processing has stopped. Execution command has terminated abnormally.
1020	Information	Distribution (ITDM-compatible)	Task `task-name` has been started according to the schedule. Task `task-name` has been started at its scheduled starting time `scheduled-starting-time`.
1021	Information	Distribution (ITDM-compatible)	On-demand tasks has ended. On-Demand Task `task-name` has been completed. Please refer the result. Number of Error Nodes=`number-of-error-nodes`
1022	Information	Assets	An unconfirmed hardware asset (`device-type`) has been recognized. An unconfirmed hardware asset (`device-type`) has been recognized. Please register the asset. The following is displayed for `device-type`. PC Server Network Device Printer Smart Device Storage USB Device Display Peripheral Device Other Device Unknown (User definition)
1028	Information	Settings	IP Discovery is complete.
1029	Information	Settings	Active Directory synchronization is complete.
1032^#	Warning	Error	An error occurred during the processing to store operation logs. `cause-of-error` The following is displayed for `cause-of-error`: An internal error occurred. If this error occurs repeatedly, contact the support service. An I/O error occurred in a data folder or local data folder. Check whether the data folder or the local folder is accessible and whether the disk space is sufficient. An error occurred while connecting to operation log backup folder (specified during Setup). Check whether the backup destination folder exists, and then re-establish the connection. Authentication to operation log backup folder (specified during Setup) has failed. Check the Username and Password (specified during Setup), and then re-establish the connection. An I/O error occurred while connecting to operation log backup folder (specified during Setup). Make sure that the operation log backup folder is accessible, and the hard disk space is sufficient. Backup files do not exist in operation log backup folder (specified during Setup). If the backup files have been moved to any other folder, then restore the files. Else you can remove the backup files and the improper catalog file, and then try operation log restoration. Check whether the operation log backup folder was specified during Setup. Connection to the operation log backup folder could not be established, because the anonymous access to shared folders is restricted on the management server. Create a user account in management server by using the Username and Password specified during Setup.
1033	Information	Security	The processing to manually acquire operation logs ended. The range manually acquired: `start-date-and-time`-`end-date-and-time`
1034	Warning	Error	An error occurred during the processing to acquired operation logs manually. `cause-of-error` Detailed information =`detailed-information` The following is displayed for `cause-of-error`: An internal error has occurred. If this error occurs repeatedly, contact the support service. An I/O error occurred in a data folder or local data folder. Check whether the data folder or the local folder is accessible and whether the disk space is sufficient. An error occurred while connecting to operation log backup folder (specified during Setup). Check whether the backup destination folder exists, and then re-establish the connection. Authentication to operation log backup folder (specified during Setup) has failed. Check the Username and Password (specified during Setup), and then re-establish the connection. An I/O error occurred while connecting to operation log backup folder (specified during Setup). Make sure that the operation log backup folder is accessible, and the hard disk space is sufficient. Backup files do not exist in operation log backup folder (specified during Setup). If the backup files have been moved to any other folder, then restore the files. Else you can remove the backup files and the improper catalog file, and then try operation log restoration. Check whether the operation log backup folder was specified during Setup. Connection to the operation log backup folder could not be established, because the anonymous access to shared folders is restricted on the management server. Create a user account in management server by using the Username and Password specified during Setup. The operation log file cannot be imported to the database because the operation log files displayed in the detailed information are corrupt. Delete the operation log files displayed in the detailed information. If the cause of the error is a file corruption, the file name is displayed for `detailed-information`.
1036^#	Critical	Error	Failed to expand database files for Operations logs. Insufficient folder space for operation logs database. Please allocate available disk space for the folder, and then restart the service. If the error is repeated even when there is enough disk space, then collect troubleshooting information (launch [Command] and execute getlogs command), and contact Support Service.
1037^#	Warning	Error	Failed to retrieve inventory and organizational information from Active Directory Server. `cause` Check Active Directory configurations (from AD server settings screen), using test connection. Error code=`error-code` Active Directory server hostname=`host-name` Connected port=`connected-port` Account=`account` Root path=`root-path` For `cause`, the cause of the error is displayed depending on the situation.
1038	Information	Settings	Action definition file (agent) has been updated.
1039	Information	Distribution (ITDM-compatible)	The Windows update will be distributed. The Windows update is not installed. Distribution of the Windows update has been requested based on the policy settings. The execution status can be confirmed through `task-name`.
1041	Warning	Distribution (ITDM-compatible)	Because the error occurred during a distribution task to update a program, the task was ended. `cause-of-error` The following is displayed for `cause-of-error`: Task name=`task-name` The downloading Windows update file failed. Windows Update File was not registered when you added Windows Update manually.
1048	Warning	Suspicious Operations	E-mail transmission with attachments has been detected. Login account name=`login-account-name` File count=`file-count` File destination information=`file-destination-information (email)`
1049	Warning	Suspicious Operations	File upload to Web Server/FTP Server was detected. Login account name=`login-account-name` File count=`file-count` File destination information=`file-destination-information (destination-URL, server-name)`
1050	Warning	Suspicious Operations	File Copy or File Move to a unregistered removable drive has been detected. Login account name=`login-account-name` File count=`file-count` File destination information=`file-destination-information (file-path)`
1051	Warning	Suspicious Operations	Mass-Printing has been detected. Login account name=`login-account-name` Print pages=`print-pages`
1055^#	Warning	Error	Failed to collect product update information. An error occurred while connecting to the Product Update server.`cause-of-error` Please check the Product Update settings, by using Test mode. For `cause-of-error`, the cause of the error is displayed depending on the situation.
1056^#	Critical	Error	Failed to notify System Administrators by e-mail. `cause-of-error` Please use Test Mode to check the SMTP server settings. For `cause-of-error`, the cause of the error is displayed depending on the situation.
1057^#	Warning	Error	Available disk space is limited. Please increase available space or change the path to a disk with sufficient space. `FolderType` (`Specified folder`) Available disk space=`available disk space of the drive`
1058^#	Critical	Error	Available disk space is limited. A database failure might occur due to limited disk space. Please increase available space or change the path to a disk with sufficient space. `FolderType` (`Specified folder`) Available disk space=`available disk space of the drive`
1059	Warning	Settings	The product license will expire soon. Expiration date: `expiration-date` Please purchase a new license key.
1060	Information	Inventory	Software has been added. Software=`software-name` `version`
1061	Information	Inventory	Software has been either deleted or the software retrieval condition was changed. Software=`software-name` `version`
1062	Information	Inventory	Software has been updated. Before change Software=`software-name` `version` After change Software=`software-name` Version=`version`
1063	Information	Security	Security measures of account (`account-name`) has been applied. Item name=`item-name` The following is displayed for `item-name`. Disable Password Never Expires Enable Password (Screen Saver) Set Startup Time (Screen Saver)
1064	Information	Error	Failed to apply security measures for account (`account-name`). Item name=`item-name` The following is displayed for `item-name`. Disable Password Never Expires Enable Password (Screen Saver) Set Startup Time (Screen Saver)
1065	Warning	Error	Failed to apply security measures for the device (Account `account-name`). Violated the assigned group policy. Confirm the policy and security measure contents. Item name=`item-name` The following is displayed for `item-name`. Disable Password Never Expires Enable Password (Screen Saver) Set Startup Time (Screen Saver)
1066	Information	Inventory	Security settings have been changed. Item=`item-name` Before change=`value` After change=`value` The following is displayed for `item-name`. Power-on password Guest account Automatic logon Shared folder Administrative sharing DCOM Restriction of anonymous connections Firewall settings Automatic Updates Remote desktop The following is displayed for `value`. Disabled Enabled None Exist Unknown Permit Not permit
1067	Information	Inventory	A computer account (`account-name`) has been added. Number of days elapsed since password change=`number-of-days-elapsed` Days Unprotected password=`unprotected-password` Password never expires setting=`password-never-expires-setting` Screensaver settings=`screensaver-settings` Screensaver password settings=`screensaver-password-settings` Screensaver waiting period=`screensaver-waiting-period` The following is displayed for `unprotected-password`. Compliant Not Compliant The following is displayed for `password-never-expires-setting`, `screensaver-settings`, and `screensaver-password-settings`. Disabled Enabled
1068	Information	Inventory	A computer account (`account-name`) has been deleted. Number of days elapsed since password update=`number-of-days-elapsed` Days Unprotected password=`unprotected-password` Password never expires setting=`password-never-expires- setting` Screensaver settings=`screensaver-settings` Screensaver password settings=`screensaver-password-settings` Screensaver waiting period=`screensaver-waiting-period` The following is displayed for `unprotected-password`. Compliant Not Compliant The following is displayed for `password-never-expiressetting`, `screensaver-settings`, and `screensaver-password-settings`. Disabled Enabled
1069	Information	Inventory	A computer account (`account-name`) has been changed. Item=`item-name` Before change=`value-before-change` After change=`value-after-change` The following is displayed for `item-name`. Password Strength Password Never Expires Screensaver settings Password (Screen Saver) Startup Time (Screen Saver) The following is displayed for `value-before-change` and `value-after-change`. Password Strength Compliant Not Compliant Password Never Expires, Screensaver settings, Password (Screen Saver) Disabled Enabled Startup Time (Screen Saver)
1070	Information	Security	Security measures has been applied. Item name=`item-name` The following is displayed for `item-name`. Disable Guest Account Disable Password Never Expires Disable Auto Logon Disable Shared Folder Disable Anonymous Access Enable Firewall Enable Automatic Update Disable Administrative Share Disable DCOM Disable Remote Desktop Execute Automatic Update Stop and Disable Windows services
1071	Warning	Error	Failed to apply security measures. Apply security measures after the System Administrator collects troubleshooting information and eliminates the cause of error. Item name=`item-name` The following is displayed for `item-name`. Disable Guest Account Disable Password Never Expires Disable Auto Logon Disable Shared Folder Disable Anonymous Access Enable Firewall Enable Automatic Update Disable Administrative Share Disable DCOM Disable Remote Desktop Execute Automatic Update Stop and Disable Windows services
1072	Warning	Error	Failed to apply security measures for the device. Violated the assigned group policy. Item name=`item-name` The following is displayed for `item-name`. Enable Firewall Enable Automatic Update Execute Automatic Update Disable Remote Desktop
1073	Information	Security	The start of a prohibited operation has been detected. Service name=`service-name`
1074	Information	Security	The completion of a prohibited operation has been detected. Service name=`service-name`
1076	Warning	Security	The Operations log was deleted. The operation log was discarded because the data that has exceeded the storage period was received. The date and time setting of the device might be incorrect.
1077	Information	Settings	The network access control is enabled. Network address=`network-address`
1078	Information	Settings	The network access control is disabled. Network address=`network-address`
1079^#	Warning	Security	The device has been disconnected. MAC address=`MAC-address` IPaddress=`IP-address`
1081	Information	Security	The network access control has started.
1082^#	Warning	Security	The network access control has stopped running.
1085	Warning	Settings	Failed to enable network access control. Check the error message output to the installer trace log file, and take action according to that error message. The installer trace log file is output to `%WINDIR%`\Temp\JDNNMA\JDNINS01.log on the source host. If the problem persists, collect troubleshooting information by using the appropriate command, and then contact customer support. (network address = `network-address`)
1086	Warning	Settings	The attempt to disable the network access control failed. Check the error message output to the installer trace log file, and then take action according to that error message. The installer trace log file is output to `%WINDIR%`\Temp\JDNNMA\JDNINS01.log on the source host. Network address=`network-address`
1087	Information	Assets	Asset information import is complete. The asset information was imported. Asset Type=Hardware Asset add=`number-of-information-items` update=`number-of-information-items` error=`number-of-information-items`
1088	Warning	Error	AMT authentication failed. (AMT power control) [AMT Settings] - [User ID] Authentication failed. To access the settings, please change the AMT credentials. http://`host-name`:16992
1089	Warning	Error	AMT authentication failed. (AMT Settings) [AMT Settings] - [admin Password] to access the settings, please change the AMT credentials. http://`host-name`:16992
1090	Warning	Error	Free space on the disk containing the operation log data folder has become scarce. Increase the free disk space, or change to a disk that has enough free space. Free disk space = `free-disk-space` MB
1091^#	Critical	Error	The operation log collection service stopped because there is almost no free space on the disk containing the operation log data folder. Increase the free disk space, or change to a disk that has enough free space. Free disk space =`free-disk-space` MB
1092	Warning	Error	Free space for the site server database has become scarce. % of database used = `database-usage`%
1093^#	Critical	Error	The operation log collection service stopped because there is almost no free space for the site server database. % of database used = `database-usage`%
1094	Warning	Error	Free space on the disk containing the data folder has become scarce. Increase the free disk space, or change to a disk that has enough free space. Free disk space = `free-disk-space` MB
1095^#	Critical	Error	A package cannot be downloaded to the site server because there is almost no free space on the disk containing the data folder. Increase the free disk space, or change to a disk that has enough free space. Free disk space = `free-disk-space` MB
1096	Information	Inventory	The site server has been installed.
1097	Information	Inventory	The site server has been uninstalled.
1098	Information	Inventory	The site server service has started.
1099	Information	Inventory	The site server service has stopped.
1100	Critical	Error	Installation of the site server program failed. Check the error message output to the installer trace log file, and take action according to that error message. The installer trace log file is output to `%WINDIR%`\Temp\JDNINST\JDNINS01.log on the source host. If the problem persists, collect troubleshooting information by using the appropriate command, and then contact customer support.
1101	Critical	Error	Uninstallation of the site server program failed. Check the error message output to the installer trace log file, and take action according to that error message. The installer trace log file is output to `%WINDIR%`\Temp\JDNINST\JDNINS01.log on the source host. If the problem persists, collect troubleshooting information by using the appropriate command, and then contact customer support.
1103^#	Critical	Error	A database access error occurred on the site server. The database service (JP1_ITDM2_DB Service) might have not started. On the site server, start the database service if it has stopped. If the problem persists, collect troubleshooting information on the site server by using the appropriate command, and then contact Customer Support. cause = `DBMS-message`
1104^#	Critical	Error	A fatal error occurred on the site server. The site server environment might be corrupted. If the problem persists, collect troubleshooting information on the site server by using the appropriate command, and then contact Customer Support. error code = `internal-error-code`
1105	Warning	Settings	Failed to enable network access control. `cause-of-error` network address = `network-address` For `cause-of-error`, the cause of the error is displayed depending on the situation.
1106	Critical	Error	Installation of the site server program failed. `cause-of-error` For `cause-of-error`, the cause of the error is displayed depending on the situation.
1110	Information	Inventory	A smart device was locked. MDM setting name = `MDM-setting-name`
1111	Warning	Error	Failed to lock a smart device. cause = `cause-of-error` MDM setting name = `MDM-setting-name` MDM server host name = `host-name` MDM server port number = `port number` MDM server user ID = `user-ID` proxy server IP address = `IP-address` proxy server port number = `port-number` proxy server user ID = `user-ID`
1112	Information	Inventory	The password of a smart device was reset. MDM setting name = `MDM-setting-name`
1113	Warning	Error	Failed to reset the password of a smart device. cause = `cause-of-error` MDM setting name = `MDM-setting-name` MDM server host name = `host-name` MDM server port number = `port number` MDM server user ID = `user-ID` proxy server IP address = `IP-address` proxy server port number = `port-number` proxy server user ID = `user-ID`
1114	Information	Inventory	A smart device was initialized. MDM setting name = `MDM-setting-name`
1115	Warning	Error	Failed to initialize a smart device. cause = `cause-of-error` MDM setting name = `MDM-setting-name` MDM server host name = `host-name` MDM server port number = `port number` MDM server user ID = `user-ID` proxy server IP address = `IP-address` proxy server port number = `port-number` proxy server user ID = `user-ID`
1116	Warning	Error	Failed to delete a smart device. A database access error might have occurred. In the settings window, select [Discover Devices] and [Managed Devices]. Then, select the devices that you want to delete, and delete them. (error code = `internal-error-code`)
1117	Information	Inventory	Synchronization of device information with the MDM system (`product-name`) is complete. MDM setting = `MDM-setting-name`
1118^#	Warning	Error	Synchronization of device information with the MDM system (`product-name`) failed. cause = `cause` MDM setting = `MDM-setting-name` MDM server host name = `host-name` MDM server port number = `port-number` user ID = `user-ID` proxy server IP address = `IP-address` proxy server port number = `port-number` proxy server user ID = `user-ID` For `cause`, the cause of the error is displayed depending on the situation.
1120	Warning	Error	Event notification to JP1/IM failed. Verify that JP1/Base is installed. The JP1/Base software is required for linkage with JP1/IM. If JP1/Base is installed, verify that its settings are correct. If the problem persists, collect troubleshooting information by using the appropriate command, and then contact customer support. (error code = `error-code`)
1122	Warning	Inventory	The size of the collected device information exceeds the maximum size that can be sent to the management server. Device information of the maximum size that can be sent to the management server was sent to the management server. The device information that exceeded the maximum size could not be sent to the management server. When network access control is enabled, the network connection of a network adapter that meets the following conditions might be disconnected: No network adapter information (hardware information) was sent. The network adapter has an IP address that is not registered in the network control list. If the above conditions are met, register the adapter in the network control list by setting [Network connections] to [Permit] for all relevant IP addresses. Do not enter MAC addresses.
1123	Warning	Error	Failed to collect device information and organization information from the Active Directory server. An error occurred during collection of device information and organization information from the Active Directory server. Collect troubleshooting information by using the appropriate command, and then contact customer support. (error code = `error-code`)
1124	Information	Settings	Software dictionary information was updated.
1127	Critical	Security	The security status has been judged. The judgment result is `violation level`. Security policy name=`security-policy-name` Update program=`violation-level-of-update-program` Antivirus software=`violation-level-of-antivirus-software` Unauthorized software=`violation-level-of-unauthorized-software` Mandatory software=`violation-level-of-mandatory-software` Unauthorized Windows service=`violation-level-of-unauthorized-Windows-service` Security settings=`violation-level-of-security-settings` User-Defined Security Settings=`violation-level-of-user-defined-security-settings` The following shows the `violation levels`: Critical Important Warning Safe Unknown Out of Target The following shows the target items of the `violation levels`: Guest account settings Vulnerable password Password that never expires Days since the password was updated Automatic logon settings Power-on password settings Shared folder settings Restriction of anonymous connections Status of unnecessary services Firewall settings Settings for automatic updates Screensaver password protect Setting for waiting time until starting of Screensaver Administrative shared folder settings DCOM settings Remote desktop settings
1128	Warning	Security	The security status has been judged. The judgment result is `violation level`. Security policy name=`security-policy-name` Update program=`violation-level-of-update-program` Antivirus software=`violation-level-of-antivirus-software` Unauthorized software=`violation-level-of-unauthorized-software` Mandatory software=`violation-level-of-mandatory-software` Unauthorized Windows service=`violation-level-of-unauthorized-Windows-service` Security settings=`violation-level-of-security-settings` User-Defined Security Settings=`violation-level-of-user-defined-security-settings` The following shows the `violation levels`: Critical Important Warning Safe Unknown Out of Target The following shows the target items of the `violation levels`: Guest account settings Vulnerable password Password that never expires Days since the password was updated Automatic logon settings Power-on password settings Shared folder settings Restriction of anonymous connections Status of unnecessary services Firewall settings Settings for automatic updates Screensaver password protect Setting for waiting time until starting of Screensaver Administrative shared folder settings DCOM settings Remote desktop settings
1129	Information	Security	The security status has been judged. The judgment result is `violation level`. Security policy name=`security-policy-name` Update program=`violation-level-of-update-program` Antivirus software=`violation-level-of-antivirus-software` Unauthorized software=`violation-level-of-unauthorized-software` Mandatory software=`violation-level-of-mandatory-software` Unauthorized Windows service=`violation-level-of-unauthorized-Windows-service` Security settings=`violation-level-of-security-settings` User-Defined Security Settings=`violation-level-of-user-defined-security-settings` The following shows the `violation levels`: Critical Important Warning Safe Unknown Out of Target The following shows the target items of the `violation levels`: Guest account settings Vulnerable password Password that never expires Days since the password was updated Automatic logon settings Power-on password settings Shared folder settings Restriction of anonymous connections Status of unnecessary services Firewall settings Settings for automatic updates Screensaver password protect Setting for waiting time until starting of Screensaver Administrative shared folder settings DCOM settings Remote desktop settings
1130	Information	Inventory	Processing to collect the revision history started.
1131	Information	Inventory	Processing to collect the revision history is complete.
1132^#	Warning	Error	A fatal error occurred during collection of the revision history. Collect troubleshooting information (launch [Command] and execute getlogs command), and contact Support Service.
1133^#	Warning	Error	Failed to output the file for saving the revision history. `cause-of-error` For `cause-of-error`, the cause of the error is displayed depending on the situation.
1134	Information	Security	A request to allow connections to the network was sent to JP1/NETM/NM - Manager.
1135^#	Warning	Security	A request to reject connections to the network was sent to JP1/NETM/NM - Manager.
1136^#	Warning	Error	Failed to reject connections to the network. `cause-of-error` The following shows the content displayed for `cause-of-error`: JP1/NETM/NM - Manager is not installed. Make sure that JP1/NETM/NM - Manager is installed on the management server. The JP1/NETM/NM - Manager service has not been started. Make sure that the JP1/NETM/NM - Manager service is running on the management server. Processing stopped because an internal error occurred. If this error occurs repeatedly, contact customer support.
1137^#	Warning	Error	Failed to allow connections to the network. `cause-of-error` The following shows the content displayed for `cause-of-error`. JP1/NETM/NM - Manager is not installed. Make sure that JP1/NETM/NM - Manager is installed on the management server. The JP1/NETM/NM - Manager service has not been started. Make sure that the JP1/NETM/NM - Manager service is running on the management server. Processing stopped because an internal error occurred. If this error occurs repeatedly, contact customer support.
1138	Warning	Error	An error occurred during the processing to export operation logs periodically. `cause-of-error` The following is displayed for `cause-of-error`: An internal error occurred. If this error occurs repeatedly, contact the support service. An I/O error occurred in a data folder or local data folder. Check whether the data folder or the local folder is accessible and whether the disk space is sufficient. An error occurred while connecting to operation log backup folder (specified during Setup). Check whether the backup destination folder exists, and then re-establish the connection. Authentication to operation log backup folder (specified during Setup) has failed. Check the Username and Password (specified during Setup), and then re-establish the connection. An I/O error occurred while connecting to operation log backup folder (specified during Setup). Make sure that the operation log backup folder is accessible, and the hard disk space is sufficient. Backup files do not exist in operation log backup folder (specified during Setup). If the backup files have been moved to any other folder, then restore the files. Else you can remove the backup files and the improper catalog file, and then try operation log restoration. Check whether the operation log backup folder was specified during Setup. Connection to the operation log backup folder could not be established, because the anonymous access to shared folders is restricted on the management server. Create a user account in management server by using the Username and Password specified during Setup.
1139	Warning	Error	An error occurred during automatic restoration of operation logs. `cause-of-error` The following is displayed for `cause-of-error`: An internal error has occurred. If this error occurs repeatedly, contact the support service. An I/O error occurred in a data folder or local data folder. Check whether the data folder or the local folder is accessible and whether the disk space is sufficient. An error occurred while connecting to operation log backup folder (specified during Setup). Check whether the backup destination folder exists, and then re-establish the connection. Authentication to operation log backup folder (specified during Setup) has failed. Check the Username and Password (specified during Setup), and then re-establish the connection. An I/O error occurred while connecting to operation log backup folder (specified during Setup). Make sure that the operation log backup folder is accessible, and the hard disk space is sufficient. Backup files do not exist in operation log backup folder (specified during Setup). If the backup files have been moved to any other folder, then restore the files. Else you can remove the backup files and the improper catalog file, and then try operation log restoration. Check whether the operation log backup folder was specified during Setup. Connection to the operation log backup folder could not be established, because the anonymous access to shared folders is restricted on the management server. Create a user account in management server by using the Username and Password specified during Setup.
1140	Warning	Error	An error occurred during the processing to update the date information of operation logs. `cause-of-error` The following is displayed for `cause-of-error`: An internal error has occurred. If this error occurs repeatedly, contact the support service. An I/O error occurred in a data folder or local data folder. Check whether the data folder or the local folder is accessible and whether the disk space is sufficient. An error occurred while connecting to operation log backup folder (specified during Setup). Check whether the backup destination folder exists, and then re-establish the connection. Authentication to operation log backup folder (specified during Setup) has failed. Check the Username and Password (specified during Setup), and then re-establish the connection. An I/O error occurred while connecting to operation log backup folder (specified during Setup). Make sure that the operation log backup folder is accessible, and the hard disk space is sufficient. Backup files do not exist in operation log backup folder (specified during Setup). If the backup files have been moved to any other folder, then restore the files. Else you can remove the backup files and the improper catalog file, and then try operation log restoration. Check whether the operation log backup folder was specified during Setup. Connection to the operation log backup folder could not be established, because the anonymous access to shared folders is restricted on the management server. Create a user account in management server by using the Username and Password specified during Setup.
1141^#	Warning	Error	Errors occurred during the processing to delete the operation logs that exceeded the storage period from the operation log database, and the processing to re-create the index information of the operation log database. Cause of error=`cause-of-error` The following is displayed for `cause-of-error`: A temporary error occurred while data was being processed. If this error occurs repeatedly, contact the support service. An I/O error occurred in a data folder or local data folder. Check whether the data folder or the local folder is accessible and whether the disk space is sufficient. If the disk does not have enough free space, increase the free disk space, or specify (during setup) a folder on a disk that has enough free space, and then restart the management server. An error occurred while connecting to operation log backup folder (specified during Setup). Check whether the backup destination folder exists, and then reestablish the connection. Authentication to operation log backup folder (specified during Setup) has failed. Check the Username and Password (specified during Setup), and then reestablish the connection. An I/O error occurred while connecting to operation log backup folder (specified during Setup). Check whether the operation log backup folder is accessible, and the hard disk space is sufficient. Backup files do not exist in operation log backup folder (specified during Setup). If the backup files has been moved to any other folder, then restore the files. Else you can remove the backup files and the improper catalog file, and then try operation log restoration. Check whether the operation log backup folder was specified during Setup. Connection to the operation log backup folder could not be established, because the anonymous access to shared folders is restricted on the management server. Create a user account in management server by using the Username and Password specified during Setup. The operation log file cannot be imported to the database because the operation log files displayed in the detailed information are corrupt. Delete the operation log files displayed in the detailed information. An error occurred in the operation log database. The free disk space might have become insufficient when the database was being expanded. In the settings window, reconfigure the server, and then restore the database by using the database manager. The total number of dates of automatically-acquired operation logs and dates of manually-acquired operation logs exceeded the maximum value that can be specified for the number of dates to be stored in the operation log database. In the Operations Log List in the security window, delete any unnecessary operation logs that were manually acquired. An error occurred in the operation log database. Use Setup to rebuild the server, then use Database Manager to restore the database.
1142	Information	Security	The deletion of the operation logs that exceeded the storage period from the operation log database, and the recreation of the index information of the operation log database started.
1143	Information	Security	The deletion of the operation logs that exceeded the storage period from the operation log database, and the recreation of the index information of the operation log database finished.
1144	Warning	Assets	Failed to register the USB device. The serial number is the same as that of a registered USB device. To ensure unique serial numbers, change the serial number of the USB device to be registered to the device instance ID, and then register the USB device again. To change the serial number to the device instance ID, in the Advanced dialog box that is displayed from the Register USB Device dialog box, enter the device instance ID in Registration condition for device instance ID. Serial number = `serial-number` Device name = `device-name` Device instance ID = `device-instance-ID`
1145	Information	Relay	Processing to send information to a lower management server has started.
1146	Information	Relay	Information sent to a lower management server was correctly applied.
1148	Information	Relay	Information sent from a higher management server was applied to a local server.
1149^#	Warning	Error	An error occurred while information was being sent to, or applied to, the management server.
1150	Information	Relay	All of the device details were reported to a higher management server.
1151	Information	Relay	The hierarchy configuration of a lower management server was changed.
1152	Information	Settings	The distribution of licenses and the permissions required to register licenses for lower management servers, including the initialization of settings, were successfully completed.
1154	Information	Settings	Old devices that have the same device information will be deleted.
1155	Information	Settings	Devices that have not been run for a long time will be deleted.
1156	Warning	Error	Devices information was deleted, but some hosts could not be deleted from the system configuration information. Use Remote Install Manager to delete hosts from the system configuration information as appropriate. Host ID = `Host ID`
1157^#	Warning	Error	An error occurred during device maintenance. Set the correct system time on the server. If the problem persists, collect troubleshooting information (using appropriate command), and contact Support Service.
1158	Information	Assets	The primary inventory was deleted. A different inventory was set as the primary inventory.
1159	Warning	Security	The network control command has been received.
1160^#	Warning	Security	The network control command has been received. However, the device whose network connection is to be blocked or allowed was not found.
1161^#	Warning	Security	The network control command was executed. The network connection of multiple devices was blocked or allowed.
1162	Information	Security	An attempt to connect to the network was rejected as the result of the network control command.
1163	Information	Security	An attempt to connect to the network was approved as the result of the network control command.
1164	Information	Assets	Asset information import is complete. Asset Type=Hardware Asset add=`number-of-information-items` update=`number-of-information-items` error=`number-of-information-items`
1165	Information	Security	The import of the external log files is complete.
1166^#	Warning	Error	An error occurred in the command ioutils importexlog.
1167^#	Warning	Error	Part of the log import processing by the command ioutils importexlog was skipped.
1168	Warning	Inventory	No host ID could be generated based on virtual computer information.
1169	Warning	API	Failed to operate part of the API.
1170	Warning	API	Failed to authenticate the API user.
1171	Warning	API	Failed to run the API.
1172	Warning	API	The API request is incorrect.
1173	Warning	API	The expiration date of the user password authenticated by the API is near.
1174	Information	Assets	Asset information import is complete. Asset Type=Software License add=`number-of-information-items` update=`number-of-information-items` error=`number-of-information-items`
1175	Information	Assets	Asset information import is complete. Asset Type=Managed Software add=`number-of-information-items` update=`number-of-information-items` error=`number-of-information-items`
1176	Information	Assets	Asset information import is complete. Asset Type=Contract add=`number-of-information-items` update=`number-of-information-items` error=`number-of-information-items`
1177	Information	Assets	Asset information import is complete. Asset Type=Contract Vendor List add=`number-of-information-items` update=`number-of-information-items` error=`number-of-information-items`
1178	Information	Assets	The import of asset association information is complete. association=`asset-association-information` update=`number-of-information-items` error=`number-of-information-items` The following is displayed for `asset-association-information`. Hardware Asset-Devices Hardware Asset-Asset Hardware Asset-Contract
1179	Information	Assets	The import of asset association information is complete. association=`asset-association-information` update=`number-of-information-items` error=`number-of-information-items` The following is displayed for `asset-association-information`. Software Licence-Managed Software Software Licence-Upgrade Licence Software Licence-Devices Software Licence-Contract
1180	Information	Assets	The import of asset association information is complete. association=`asset-association-information` update=`number-of-information-items` error=`number-of-information-items` The following is displayed for `asset-association-information`. Managed Software-Software Managed Software-Software Licence
1181	Information	Assets	The import of asset association information is complete. association=`asset-association-information` update=`number-of-information-items` error=`number-of-information-items` The following is displayed for `asset-association-information`. Contract-Hardware Asset Contract-Software Licence Contract-Contract Vendor List
1182^#	Warning	Security	A device to be blocked was detected. Check the settings of the network control list. MAC address=`MAC-address` IPaddress=`IP-address`

#: When linked to JP1/IM, the ID displayed in JP1/IM for the JP1 event.

To Page Top