付録F 定義情報の検証について
jpctool config mgrimportコマンドでは,定義情報をインポートする前に,-dオプションで指定した定義情報とインポート先の定義情報が一致しているかどうかを検証します。一致していない定義情報がある場合,KAVE06142-Eメッセージが標準エラー出力,共通メッセージログに出力されます。なお,KAVE06142-Eメッセージは,一致していない定義情報の数だけ出力されます。
メッセージに表示される定義情報名とファイルまたはコマンドで設定する定義情報の一覧を次の表に示します。
定義情報名 |
分類 |
ファイル名またはコマンド名 (セットアップ項目名) |
検証方法 |
---|---|---|---|
jpchosts |
ファイル |
jpchosts (ホスト情報設定ファイル) |
ファイル比較※ |
jpcvsvr.ini, label=UserServer.authenticationMode |
jpcvsvr.ini (認証モードの設定) |
ラベルの設定値をテキスト比較 |
|
monitoringitems.cfg |
monitoringitems.cfg (カスタム監視項目定義ファイル) |
ファイル比較※ |
|
Configure the health check function |
コマンド |
jpcconf hc (ヘルスチェック機能の設定) |
jpcconf hc displayコマンドの出力結果から,ヘルスチェック機能の設定を比較 |
Configure the status management function |
jpcconf stat (ステータス管理機能の設定) |
jpcconf stat displayコマンドの出力結果から,ステータス管理機能の設定を比較 |
|
Setting the product name display function |
jpcconf prodname (プロダクト名表示機能の設定) |
jpcconf prodname displayコマンドの出力結果から,プロダクト名表示機能の設定を比較 |
|
Setting IPv6 addresses |
jpcconf ipv6 (IPv6通信機能の設定) |
jpcconf ipv6 displayコマンドの出力結果から,IPv6通信機能の設定を比較 |
|
IM2 Linkage |
jpcconf im2 (JP1/IM2連携機能の設定) |
jpcconf im2 displayコマンドの出力結果から,JP1/IM2連携機能の設定を比較 |
|
IM2 Linkage Notify State Change Event |
jpcconf im2 displayコマンドの出力結果から,エージェントステータス変更イベント一括発行機能の設定を比較 |
- 注※
-
ファイル比較となっている定義情報は,コメントなども含めてファイルの内容がすべて一致している必要があります。
一致していない定義情報がある場合に,KAVE06142-Eメッセージに表示される定義情報名と,設定値を確認する必要がある項目の対応を次の表に示します。KAVE06142-Eメッセージに表示されている定義情報名を確認して,一致していない定義情報を設定し直し,再度jpctool config mgrimportコマンドを実行してください。
定義情報名 |
セクション名 |
ラベル名 |
---|---|---|
jpccomm.ini, section=Common Section, label=Multiple Alarm Table Bind |
Common Section |
Multiple Alarm Table Bind |
jpccomm.ini, section=Common Section, label=Alarm Message Mode |
Alarm Message Mode |
|
jpccomm.ini, section=Common Section, label=JP1 Event Double Quote |
JP1 Event Double Quote |
|
jpccomm.ini, section=Common Section, label=Correlator Startup Mode |
Correlator Startup Mode |
|
jpccomm.ini, section=Common Section, label=Retry Getting Alarm Status |
Retry Getting Alarm Status |
|
jpccomm.ini, section=Common Section, label=Business Group Monitor Mode |
Business Group Monitor Mode |
|
jpccomm.ini, section=Common Section, label=Agent Remote Protection |
Agent Remote Protection |
|
jpccomm.ini, section=Common Section, label=Service List Protection |
Service List Protection |
|
jpccomm.ini, section=Common Section, label=Prioritize Manager Startup |
Prioritize Manager Startup |
|
jpccomm.ini, section=Common Section, label=Multiple Manager |
Multiple Manager |
|
jpccomm.ini, section=Common Section, label=Remote Action Control |
Remote Action Control |
|
jpccomm.ini, section=Common Section, label=Alarm Command Wait Mode |
Alarm Command Wait Mode |
|
jpccomm.ini, section=Common Section, label=Alarm Command Timeout |
Alarm Command Timeout |
|
jpccomm.ini, section=Common Section, label=Historical Data Collection Priority Mode |
Historical Data Collection Priority Mode |
|
jpccomm.ini, section=Common Section, label=Random Retry Mode |
Random Retry Mode |
|
jpccomm.ini, section=Common Section, label=Monitoring Suspend Mode |
Monitoring Suspend Mode |
|
jpccomm.ini, section=Common Section, label=Auto Sync for Suspend Setting |
Auto Sync for Suspend Setting |
|
jpccomm.ini, section=Common Section, label=Auto Alarm Bind Mode |
Auto Alarm Bind Mode |
|
jpccomm.ini, section=Common Section, label=Suppress Action Execution |
Suppress Action Execution |
|
jpccomm.ini, section=Name Server Section, label=NS Connection Timeout |
Name Server Section |
NS Connection Timeout※ |
jpccomm.ini, section=Name Server Section, label=NS Maximum Connections |
NS Maximum Connections |
|
jpccomm.ini, section=Name Server Section, label=NS Keepalive Mode |
NS Keepalive Mode |
|
jpccomm.ini, section=Master Manager Section, label=NS Connection Timeout |
Master Manager Section |
NS Connection Timeout※ |
jpccomm.ini, section=Master Manager Section, label=NS Maximum Connections |
NS Maximum Connections |
|
jpccomm.ini, section=Master Manager Section, label=NS Keepalive Mode |
NS Keepalive Mode |
|
jpccomm.ini, section=Correlator Section, label=NS Connection Timeout |
Correlator Section |
NS Connection Timeout※ |
jpccomm.ini, section=Correlator Section, label=NS Maximum Connections |
NS Maximum Connections |
|
jpccomm.ini, section=Correlator Section, label=NS Keepalive Mode |
NS Keepalive Mode |
|
jpccomm.ini, section=Tools Section, label=StartService Retry Interval |
Tools Section |
StartService Retry Interval |
jpccomm.ini, section=Tools Section, label=StartService Retry Count |
StartService Retry Count |
|
jpccomm.ini, section=Tools Section, label=NS Keepalive Mode |
NS Keepalive Mode |
|
jpccomm.ini, section=Master Store Section, label=NS Keepalive Mode |
Master Store Section |
NS Keepalive Mode |
jpccomm.ini, section=Action Handler Section, label=NS Keepalive Mode |
Action Handler Section |
NS Keepalive Mode |
jpccomm.ini, section=Action Handler Section, label=Action Execution Count Limitation |
Action Execution Count Limitation |
|
jpccomm.ini, section=Action Handler Section, label=Action Concurrent Execution Count |
Action Concurrent Execution Count |
|
jpccomm.ini, section=Action Handler Section, label=Action Execution Queue Count |
Action Execution Queue Count |
|
jpccomm.ini, section=Action Handler Section, label=Action Execution Time Limit |
Action Execution Time Limit |
|
jpccomm.ini, section=Trap Generator Section, label=NS Keepalive Mode |
Trap Generator Section |
NS Keepalive Mode |
jpccomm.ini, section=Status Server Section, label=NS Keepalive Mode |
Status Server Section |
NS Keepalive Mode |
jpccomm.ini, section=View Server Section, label=NS Keepalive Mode |
View Server Section |
NS Keepalive Mode |
jpccomm.ini, section=Agent Collector 0 Section, label=NS Keepalive Mode |
Agent Collector 0 Section |
NS Keepalive Mode |
jpccomm.ini, section=Agent Collector 0 Section, label=Historical Data Collection Priority Mode |
Historical Data Collection Priority Mode |
- 注※
-
バージョン11-50以降では,プライマリーとセカンダリーで値が不一致の場合,値に70を設定してください。
定義情報名 |
フォルダ名 |
プロパティ名 |
|
---|---|---|---|
HealthCheck, Property=JP1 Event Configurations->Agent Collector |
JP1 Event Configurations |
− |
Agent Collector |
HealthCheck, Property=JP1 Event Configurations->Agent Store |
Agent Store |
||
HealthCheck, Property=Detail Records->PD->Log |
Detail Records |
PD |
Log |
HealthCheck, Property=Detail Records->PD->Collection Interval |
Collection Interval |
||
HealthCheck, Property=Detail Records->PD->Collection Offset |
Collection Offset |
||
HealthCheck, Property=Detail Records->PD->Realtime Report Data Collection Mode |
Realtime Report Data Collection Mode※ |
||
HealthCheck, Property=Detail Records->PD->LOGIF |
LOGIF |
||
HealthCheck, Property=Detail Records->HC->Log |
HC |
Log |
|
HealthCheck, Property=Detail Records->HC->Collection Interval |
Collection Interval |
||
HealthCheck, Property=Detail Records->HC->Collection Offset |
Collection Offset |
||
HealthCheck, Property=Detail Records->HC->Realtime Report Data Collection Mode |
Realtime Report Data Collection Mode※ |
||
HealthCheck, Property=Detail Records->HC->LOGIF |
LOGIF |
||
HealthCheck, Property=Detail Records->HOST->Log |
HOST |
Log |
|
HealthCheck, Property=Detail Records->HOST->Realtime Report Data Collection Mode |
Realtime Report Data Collection Mode※ |
||
HealthCheck, Property=Detail Records->HOST->LOGIF |
LOGIF |
||
HealthCheck, Property=Interval Records->PI->Log |
Interval Records |
PI |
Log |
HealthCheck, Property=Interval Records->PI->Collection Interval |
Collection Interval |
||
HealthCheck, Property=Interval Records->PI->Collection Offset |
Collection Offset |
||
HealthCheck, Property=Interval Records->PI->Realtime Report Data Collection Mode |
Realtime Report Data Collection Mode※ |
||
HealthCheck, Property=Interval Records->PI->LOGIF |
LOGIF |
||
HealthCheck, Property=Interval Records->SYS->Log |
SYS |
Log |
|
HealthCheck, Property=Interval Records->SYS->Realtime Report Data Collection Mode |
Realtime Report Data Collection Mode※ |
||
HealthCheck, Property=Interval Records->SYS->LOGIF |
LOGIF |
||
HealthCheck, Property=Interval Records->HAVL->Log |
HAVL |
Log |
|
HealthCheck, Property=Interval Records->HAVL->Realtime Report Data Collection Mode |
Realtime Report Data Collection Mode※ |
||
HealthCheck, Property=Interval Records->HAVL->LOGIF |
LOGIF |
||
HealthCheck, Property=Health Check Configurations->Monitoring Level |
Health Check Configurations |
− |
Monitoring Level |
HealthCheck, Property=Health Check Configurations->Incl Action Handler |
Incl Action Handler |
||
HealthCheck, Property=Health Check Configurations->Busy as Inactive |
Busy as Inactive |
||
HealthCheck, Property=Health Check Configurations->Time to Busy as Inactive Collector |
Time to Busy as Inactive Collector |
||
HealthCheck, Property=Health Check Configurations->Time to Busy as Inactive Store |
Time to Busy as Inactive Store |
||
HealthCheck, Property=Health Check Configurations->Time to Busy as Inactive AH |
Time to Busy as Inactive AH |
||
HealthCheck, Property=Health Check Configurations->JP1 Event |
JP1 Event |
||
HealthCheck, Property=Health Check Configurations->JP1 Event - Send Host Mode |
JP1 Event - Send Host Mode |
||
HealthCheck, Property=Health Check Configurations->JP1 Event - Not Supported |
JP1 Event - Not Supported |
||
HealthCheck, Property=Health Check Configurations->JP1 Event - Running |
JP1 Event - Running |
||
HealthCheck, Property=Health Check Configurations->JP1 Event - Incomplete |
JP1 Event - Incomplete |
||
HealthCheck, Property=Health Check Configurations->JP1 Event - Stopped |
JP1 Event - Stopped |
||
HealthCheck, Property=Health Check Configurations->JP1 Event - Unconfirmed |
JP1 Event - Unconfirmed |
||
HealthCheck, Property=Health Check Configurations->JP1 Event - Host Not Available |
JP1 Event - Host Not Available |
||
HealthCheck, Property=Health Check Configurations->Parallel Confirmation Mode |
Parallel Confirmation Mode |
||
HealthCheck, Property=Health Check Configurations->Parallel Confirmation Count |
Parallel Confirmation Count |
||
HealthCheck, Property=Health Check Configurations->Minimum Period Per Host |
Minimum Period Per Host |
||
HealthCheck, Property=Health Check Configurations->Timeout Period Per Host |
Timeout Period Per Host |
- (凡例)
-
−:なし
- 注※
-
履歴データの収集をリアルタイムレポートの表示処理より優先する機能(履歴収集優先機能)が有効の場合だけ,一致している必要があります。無効の場合はプロパティが表示されません。
定義情報名(メッセージに表示される文字列) |
フォルダ名 |
プロパティ名 |
|
---|---|---|---|
HealthCheck(Store), Property=RetentionEx->Product Interval - PI->Period - Minute Drawer (Day) |
RetentionEx |
Product Interval - PI |
Period - Minute Drawer (Day) |
HealthCheck(Store), Property=RetentionEx->Product Interval - PI->Period - Hour Drawer (Day) |
Period - Hour Drawer (Day) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - PI->Period - Day Drawer (Week) |
Period - Day Drawer (Week) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - PI->Period - Week Drawer (Week) |
Period - Week Drawer (Week) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - PI->Period - Month Drawer (Month) |
Period - Month Drawer (Month) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - PI->Period - Year Drawer (Year) |
Period - Year Drawer (Year) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - SYS->Period - Minute Drawer (Day) |
Product Interval - SYS |
Period - Minute Drawer (Day) |
|
HealthCheck(Store), Property=RetentionEx->Product Interval - SYS->Period - Hour Drawer (Day) |
Period - Hour Drawer (Day) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - SYS->Period - Day Drawer (Week) |
Period - Day Drawer (Week) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - SYS->Period - Week Drawer (Week) |
Period - Week Drawer (Week) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - SYS->Period - Month Drawer (Month) |
Period - Month Drawer (Month) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - SYS->Period - Year Drawer (Year) |
Period - Year Drawer (Year) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - HAVL->Period - Minute Drawer (Day) |
Product Interval - HAVL |
Period - Minute Drawer (Day) |
|
HealthCheck(Store), Property=RetentionEx->Product Interval - HAVL->Period - Hour Drawer (Day) |
Period - Hour Drawer (Day) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - HAVL->Period - Day Drawer (Week) |
Period - Day Drawer (Week) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - HAVL->Period - Week Drawer (Week) |
Period - Week Drawer (Week) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - HAVL->Period - Month Drawer (Month) |
Period - Month Drawer (Month) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - HAVL->Period - Year Drawer (Year) |
Period - Year Drawer (Year) |
||
HealthCheck(Store), Property=RetentionEx->Product Detail - PD->Period (Day) |
Product Detail - PD |
Period (Day) |
|
HealthCheck(Store), Property=RetentionEx->Product Detail - HC->Period (Day) |
Product Detail - HC |
Period (Day) |
|
HealthCheck(Store), Property=RetentionEx->Product Detail - HOST->Period (Day) |
Product Detail - HOST |
Period (Day) |
|
Master Manager, Property=JP1 Event Configurations->Name Server |
JP1 Event Configurations |
− |
Name Server |
Master Manager, Property=JP1 Event Configurations->Master Manager |
Master Manager |
||
Master Manager, Property=JP1 Event Configurations->Master Store |
Master Store |
||
Master Manager, Property=JP1 Event Configurations->Correlator |
Correlator |
||
Master Manager, Property=JP1 Event Configurations->Trap Generator |
Trap Generator |
||
Master Manager, Property=JP1 Event Configurations->View Server |
View Server |
||
Master Manager, Property=JP1 Event Configurations->Action Handler |
Action Handler |
||
Master Manager, Property=JP1 Event Configurations->Status Server |
Status Server |
||
Master Manager, Property=JP1 Event Configurations->JP1 Event Send Host |
JP1 Event Send Host |
||
Master Manager, Property=JP1 Event Configurations->Monitoring Console Host |
Monitoring Console Host |
||
Master Manager, Property=JP1 Event Configurations->Monitoring Console Port |
Monitoring Console Port |
||
Master Manager, Property=JP1 Event Configurations->Alarm->JP1 Event Mode |
Alarm |
JP1 Event Mode |
|
Master Manager, Property=JP1 Event Configurations->System->Monitoring Suspend |
System |
Monitoring Suspend |
|
Master Manager, Property=ITSLM Coordination Configuration->ITSLM Coordination->ITSLM Host |
ITSLM Coordination Configuration |
ITSLM Coordination |
ITSLM Host |
- (凡例)
-
−:なし