7.2.6 Set Web Transaction Conditions window

(1) Web Transaction Info page

The Web Transaction Info page displays identification information for the Web transaction. Each item on this page displays information that was specified when the Web transaction was created.

The following describes the displayed items.

Web transaction name:

Displays the name of the subject Web transaction. This information cannot be changed.

Saved file name:

Displays the name of the Web transaction file that contains the subject Web transaction information. This information cannot be changed.

Comment:

Displays the comment that has been set for the subject Web transaction. This information can be edited (but must not exceed 255 bytes). Any spaces, tabs, or linefeed characters preceding or following the entered character string are deleted.

Character set:

Specify the default character set for the HTML file acquired in the Web transaction. If there are steps whose acquired HTML file that does not specify the character set, PFM - Agent for Service Response assumes its character set to be what you specify here.

From the pull-down menu, select Shift_JIS, EUC-JP, ISO-2022-JP, UTF-8, GB18030^# or None specified. None specified is selected by default. Note that when you select None specified, it means Shift_JIS on Japanese OS, GB18030 on Chinese OS, or US-ASCII on the other OS.

#

GB18030 supports only in Chinese OS and you cannot use the 4 bytes characters.

Note:

If you mistakenly select the character set, the Web transaction monitoring may fail when you set the response determination condition or condition of variable string.

Reference note:

Regardless of the Character set setting, the Web transaction file is output in Shift_JIS on Japanese OS, GB18030 on Chinese OS, or US-ASCII on the other OS.

Output the acquired HTML and HTTP header in a file. check box

Select this check box when you output the acquired HTML and HTTP header in a file. This check box is not selected by default.

To Page Top

(2) Request Info page

The Request Info page is used to set overall information about the Web transaction's navigation requests.

The following describes the displayed items.

Acquire embedded resource:

Enables you to select whether or not resources are to be acquired, such as images embedded in pages. The default is Do.

Allow cache consultation:

Enables you to select whether or not accessing the cache is to be permitted. The default is Do.

Keep alive:

Enables you to select whether or not the connection is to be kept active. The default is Do not do.

User agent:

Specifies (as up to 255 bytes) the User-Agent header to be used during Web transaction monitoring. The default is PFM - Agent for Service Response (Windows). If this item is omitted, the default is used. Any spaces, tabs, or linefeed characters preceding or following the entered character string are deleted.

To Page Top

(3) Default Proxy page

The Default Proxy page is used to set information related to use of a proxy. The information specified on this page becomes the default proxy settings for all the steps in the corresponding Web transaction.

The following describes the displayed items.

Use proxy check box:

Specifies that a proxy is to be used. The default is that this check box is not selected.

Proxy host name:

Specifies the proxy's host name or IP address (as up to 255 bytes). When you have selected the Use proxy check box, you must specify this information. Any spaces, tabs, or linefeed characters preceding or following the entered character string are deleted. To specify an IPv4 address for the host name, use dotted-decimal format (for example: 172.16.233.12). To specify an IPv6 address, use hexadecimal format using colons as separators (for example: ACE6:45:75:91::1).

Proxy port number:

Specifies the proxy server's port number, in the range 1 to 65535. When you have selected the Use proxy check box, you must specify this information.

Proxy authentication check box:

Specifies that proxy authentication is to be performed. The default is that this check box is not selected.

Proxy authentication user name:

Specifies a user name (as up to 64 bytes). When you have selected the Proxy authentication check box, you must specify this information. Any spaces, tabs, or linefeed characters preceding or following the entered character string are deleted.

Use password utility check box:

Specifies that the password utility is to be used to register a proxy password. The default is that this check box is selected. When this item is selected, the password must have been registered by the password utility. If you do not use the password utility, specify a password in Proxy password.

Proxy password:

If you have not selected the Use password utility check box, specify a password (as up to 64 bytes) that is to be used for proxy authentication. Any spaces, tabs, or linefeed characters preceding or following the entered character string are deleted.

Note:

The password specified in Proxy password is stored as text in the Web transaction file, so Hitachi recommends that you use the password utility.

To Page Top

(4) SSL Authentication page

The SSL Authentication page is used to set information related to SSL authentication.

If you specify the SSL authentication settings, these settings are not applied when measuring.

The following describes the displayed items.

Server authentication error:

Enables you to select whether or not errors that occur during server authentication are to be ignored. The default is Do not ignore.

Client authentication check box:

Specifies that client authentication is to be performed. The default is that this check box is not selected.

Client certificate file name:

Specifies the file name of the client certificate file (as up to 255 bytes). If you have selected Client authentication, you must specify this information. Any spaces, tabs, or linefeed characters preceding or following the entered character string are deleted.

Use password utility check box:

Specifies that the password utility is to be used. The default is that this check box is selected. When this item is selected, the password must have been registered by the password utility. If you do not use the password utility, specify a password in Private key password.

Private key password:

If you have not selected the Use password utility check box, specify a private key password (as up to 1,023 bytes). Any spaces, tabs, or linefeed characters preceding or following the entered character string are deleted.

Note:

The password specified in Private key password is stored as text in the Web transaction file, so Hitachi recommends that you use the password utility.

To Page Top