The Disk Queue alarm monitors the queue length for devices for which the amount of I/O processing per second is 1. If the queue length continues to be at or above the threshold, the device is congested.

PFM - Web Console alarm property		Settings
Item	Detailed item
Main Information	Product	UNIX
	Alarm message	Disk Queue(%CVS1) = %CVS2
	Enable alarm	Yes
	Monitoring time range	Evaluate regularly
	Evaluate all data	No
	Report alarm when the following damping condition is reached	Yes
	interval(s)	5
	occurrence(s) during	4
Action	Email	--
	Command	--
	SNMP	Abnormal, Warning, Normal
Alarm Conditions 1	Record	Device Detail (PI_DEVD)
	Field	Device Name
	Abnormal condition	Device Name <> dummy#1
	Warning condition	Device Name <> dummy#1
Alarm Conditions 2	Record	Device Detail (PI_DEVD)
	Field	Queue Length
	Abnormal condition	Queue Length >= 5#2
	Warning condition	Queue Length >= 3#2

Legend:

--: Setting is always ignored.

#1

Sets the name of a device that will not be monitored. No device with the name set here in the table exists, so all devices will become monitoring targets.

#2

Change the value as necessary for the environment.

PFM UNIX Template Alarms [DSK] 09.00

Reports/UNIX/Troubleshooting/Real-Time/Drilldown Only/Device Detail