The Disk Busy % alarm monitors the disk busy rate (%). If the disk busy rate continues to be at or above the threshold, I/O operations might be concentrated on a specific disk.

Reference note

To monitor a specific device, copy this alarm to create an alarm by changing the condition expression in the Device Name field to Device Name = name-of-monitored-device.

PFM - Web Console alarm property		Settings
Item	Detailed item
Main Information	Product	UNIX
	Alarm message	Disk Busy % (%CVS1) = %CVS2
	Enable alarm	Yes
	Monitoring time range	Evaluate regularly
	Evaluate all data	No
	Report alarm when the following damping condition is reached	Yes
	interval(s)	5
	occurrence(s) during	4
Action	Email	--
	Command	--
	SNMP	Abnormal, Warning, Normal
Alarm Conditions 1	Record	Device Detail (PI_DEVD)
	Field	Device Name
	Abnormal condition	Device Name <> dummy#
	Warning condition	Device Name <> dummy#
Alarm Conditions 2	Record	Device Detail (PI_DEVD)
	Field	Busy %
	Abnormal condition	Busy % >= 90
	Warning condition	Busy % >= 80

Legend:

--: Setting is always ignored.

#

Sets the name of a device that will not be monitored. No device with the name set here in the table exists, so all devices will become monitoring targets.

PFM UNIX Template Alarms [DSK] 09.00

None