The Network Rcvd/sec alarm monitors the number of packets received per second. If the number of packets is large, many packets have been received successfully.

PFM - Web Console alarm property		Settings
Item	Detailed item
Main Information	Product	UNIX
	Alarm message	Pkt Rcvd/sec = %CVS1
	Enable alarm	Yes
	Monitoring time range	Evaluate regularly
	Evaluate all data	No
	Report alarm when the following damping condition is reached	Yes
	interval(s)	5
	occurrence(s) during	4
Action	Email	--
	Command	--
	SNMP	Abnormal, Warning, Normal
Alarm Conditions	Record	Network Interface Summary (PI_NINS)
	Field	Pkts Rcvd/sec
	Abnormal condition	Pkts Rcvd/sec >= 9#1
	Warning condition	Pkts Rcvd/sec >= 8#2

Legend:

--: Setting is always ignored.

#1

Depending on the environment, set a value that is around 90% of the NIC bandwidth.

#2

Depending on the environment, set a value that is around 80% of the NIC bandwidth.

PFM UNIX Template Alarms [NET] 09.00

Reports/UNIX/Troubleshooting/Real-Time/Network Interface Summary