H.3 Connectivity with version 8 products
- Organization of this subsection
-
(1) Restrictions placed when JP1/IM - View 10-50 is connected to JP1/IM - Manager 08-01 (when using the Central Console)
JP1/IM - Manager version |
Restrictions# |
---|---|
1 to 21 |
|
08-01 |
Y |
- Legend:
-
Y: Applicable
#: The restriction numbers correspond to the numbers in the following table.
No. |
Details |
---|---|
1 |
|
2 |
You cannot specify exclusion-conditions in the following windows (the Exclusion-conditions group area is unavailable):
You cannot specify common exclusion-conditions in the following windows (the Common exclusion-conditions groups area is unavailable):
|
3 |
The event display start-time specification area does not appear on the Monitor Events and Severe Events pages. |
4 |
The Display range: area does not appear on the Monitor Events and Severe Events pages. |
5 |
The following items related to the specified display event period feature do not appear:
|
6 |
|
7 |
|
8 |
You cannot specify a response status in the following windows:
|
9 |
Correlation failure events are displayed as correlation approval events in the following windows:
|
10 |
Common exclusion-conditions in extended mode cannot be defined. |
11 |
Business groups and monitoring groups cannot be specified for event conditions and the command execution host. |
12 |
An IPv6 environment is not supported. |
13 |
Repeated event conditions cannot be defined. |
14 |
Repeated events for which monitoring is suppressed by repeated event monitoring suppression cannot be displayed in consolidated format. |
15 |
Single sign-on cannot be used to connect to JP1/IM - Navigation Platform. |
16 |
The range of automated-action suppression and the issuance of the event to notify that suppression will continue cannot be specified. |
17 |
Additional severity changing definitions cannot be registered. |
18 |
Severity changing definitions cannot be defined in the Severity Change Definition Settings window. |
19 |
View filters cannot be used on the Severe Events page. |
20 |
Events cannot be highlighted on the Severe Events page. |
21 |
The range of events to be collected at login cannot be set. |
(2) Restrictions placed when JP1/IM - View 10-50 is connected to JP1/IM - Manager 08-01 (when using the Central Scope)
JP1/IM - Manager version |
Restrictions# |
---|---|
1 to 7 |
|
08-01 |
Y |
- Legend:
-
Y: Applicable
#: The restriction numbers correspond to the numbers in the following table.
No. |
Details |
---|---|
1 |
|
2 |
The following restrictions apply:
|
3 |
Margins of monitoring node icon and monitoring node name cannot be hidden. |
4 |
Transmission factor cannot be set for monitoring node icons. |
5 |
Status colors of monitoring node and monitoring node name cannot be changed. |
6 |
Moving of monitoring node icon cannot be suppressed in the Monitoring Tree and Visual Monitoring windows. |
7 |
Timing of the flashing alarm lamp cannot be changed. |
(3) Restrictions placed when JP1/IM - View 10-50 is connected to JP1/IM - Manager 08-01 (when using IM Configuration Management)
JP1/IM - Manager version |
Restrictions# |
---|---|
1 |
|
08-01 |
Y |
- Legend:
-
Y: Applicable
#: The restriction numbers correspond to the numbers in the following table.
No. |
Details |
---|---|
1 |
You cannot connect to JP1/IM - Manager from IM Configuration Management - View. |
(4) Restrictions placed when JP1/IM - View 08-01 is connected to JP1/IM - Manager 10-50 (when using the Central Console)
JP1/IM - View version |
Restrictions# |
---|---|
1 to 32 |
|
08-01 |
Y |
- Legend:
-
Y: Applicable
#: The restriction number corresponds to the number in the following table.
No. |
Details |
---|---|
1 |
The Edit menu does not appear in the Event Console window. |
2 |
The following items and button are not displayed even when BJEX or JP1/AS linkage is set in JP1/IM - Manager:
The item Response-waiting event under Conditions in the Detailed Settings for Event Receiver Filter, Severe Event Definitions, Settings for View Filter, and Conditions Event Search Conditions windows |
3 |
When the response-waiting event management function is enabled, JP1/IM - View 08-50 displays an arrow icon in the Type field, but JP1/IM - View versions 08-00 to 08-10 do not. |
4 |
When the setting of the item Response-waiting event in the Preferences window of JP1/IM - View 08-50 or later is enabled in the user profile, the Response-waiting event setting is disabled if the user connects to JP1/IM - Manager 08-50 from JP1/IM - View 08-00 to 08-10 and changes the contents of the user profile in the Preferences window. |
5 |
|
6 |
The event display start-time specification area does not appear on the Monitor Events and Severe Events pages. |
7 |
The Display range: area does not appear on the Monitor Events and Severe Events pages. |
8 |
The following items related to the specified display event period feature do not appear:
|
9 |
The following restrictions apply when using an action definition file from version 08-01 or earlier of JP1/IM - Manager:
|
10 |
The following restriction applies when using an action definition file from version 09-00 of JP1/IM - Manager:
|
11 |
|
12 |
You cannot specify a response status in the following windows:
|
13 |
Correlation failure events are displayed as correlation approval events in the following windows:
|
14 |
If common exclusion-conditions or additional common exclusion-conditions in extended mode are set, the following occurs:
|
15 |
Command buttons are not displayed. |
16 |
Incidents cannot be manually set in JP1/IM - Service Support. |
17 |
The event source host attribute is not displayed (the event source host attribute can be specified for event conditions as an extended attribute). |
18 |
If restrictions are enabled on viewing and operating business groups, users cannot log in. |
19 |
Business groups and monitoring groups cannot be specified for event conditions and the command execution host. |
20 |
The following conditions set by JP1/IM - View version 08-01 or later cannot be viewed or changed:
|
21 |
The following conditions set by JP1/IM - View version 09-00 or later cannot be viewed or changed:
|
22 |
If Read From Selected Event is executed for the JP1 events in which IPv6 addresses are used, the condition for the event source IP address is not input. |
23 |
In the Event Details window, the attribute information of the event source IP address is not displayed. |
24 |
Repeated event conditions cannot be defined. |
25 |
Repeated events for which monitoring is suppressed by repeated event monitoring suppression cannot be displayed in consolidated format. |
26 |
Single sign-on cannot be used to connect to JP1/IM - Navigation Platform. |
27 |
The range of automated-action suppression and the issuance of the event to notify that suppression will continue cannot be specified. |
28 |
Additional severity changing definitions cannot be registered. |
29 |
Severity changing definitions cannot be defined in the Severity Change Definition Settings window. |
30 |
View filters cannot be used on the Severe Events page. |
31 |
Events cannot be highlighted on the Severe Events page. |
32 |
The range of events to be collected at login cannot be set. |
(5) Restrictions placed when JP1/IM - View 08-01 is connected to JP1/IM - Manager 10-50 (when using the Central Scope)
JP1/IM - View version |
Restrictions# |
---|---|
1 to 8 |
|
08-01 |
Y |
- Legend:
-
Y: Applicable
#: The restriction numbers correspond to the numbers in the following table.
No. |
Details |
---|---|
1 |
The following restriction applies to the Monitoring Tree window:
|
2 |
Restrictions apply when using the Monitoring Tree (Editing) window and the Visual Monitoring (Editing) window#. Because you cannot log in to the server, the following operations are unavailable:
|
3 |
The following restriction applies to the Monitoring Tree window:
|
4 |
Margins of monitoring node icon and monitoring node name cannot be hidden. |
5 |
Transmission factor cannot be set for monitoring node icons. |
6 |
Status colors of monitoring node and monitoring node name cannot be changed. |
7 |
Moving of monitoring node icon cannot be suppressed in the Monitoring Tree and Visual Monitoring windows. |
8 |
Timing of the flashing alarm lamp cannot be changed. |
#: For details on dealing with these restrictions, see 10.5.1(15) Actions to take when an earlier version of JP1/IM - Manager or JP1/IM - View is being used in the Job Management Partner 1/Integrated Management - Manager Administration Guide.
(6) Restrictions placed when JP1/IM - View 08-01 is connected to JP1/IM - Manager 10-50 (when using IM Configuration Management)
JP1/IM - View version |
Restrictions# |
---|---|
1 |
|
08-01 |
Y |
- Legend:
-
Y: Applicable
#: The restriction number corresponds to the number in the following table.
No. |
Details |
---|---|
1 |
You cannot connect to IM Configuration Management. |