Job Management Partner 1/File Transmission Server/FTP Description, Reference and Operator's Guide

8.2.5 Messages issued by the ftstran command

These messages are output to the terminal used to execute the command.

KDJF5001-I
Transmission ended normally.

File transmission terminated normally. If you specified output of results upon termination of transmission, output of transmission results also terminated normally.

KDJF5002-W
Transmission ended normally but with a warning.

File transmission terminated normally. If you specified output of results upon termination of transmission, output of transmission results terminated abnormally.

KDJF5003-E
Transmission ended abnormally.

File transmission terminated abnormally.

(S)

Terminates ftstran command processing.

(O)

Check the transmission logs for error details.

KDJF5004-E
Invalid option.- opt

An invalid opt option was specified.

(S)

Terminates ftstran command processing.

(O)

Check and, if necessary, revise the specified option.

KDJF5005-E
Duplicated option.- opt

The opt option was specified more than once.

(S)

Terminates ftstran command processing.

(O)

Check and, if necessary, revise the specified options.

KDJF5006-W
Usage: ftstran cardname [-N file] [-E file] [-M[B|T]] [-H hostname] [transmission-option transmission-option-parameter]

The operands are not specified correctly.

(S)

Terminates ftstran command processing.

(O)

Check and, if necessary, revise the specified operands.

KDJF5007-E
The file name is specified incorrectly.

(S)

Terminates ftstran command processing.

(O)

Check and, if necessary, revise the specified file name.

KDJF5008-E
The file name is too long.

(S)

Terminates ftstran command processing.

(O)

Express the file name as a character string in the range from 1 to 256 bytes.

KDJF5009-E
The card name is specified incorrectly.

(S)

Terminates ftstran command processing.

(O)

Check and, if necessary, revise the specified card name.

KDJF5010-E
The card name is too long.

(S)

Terminates ftstran command processing.

(O)

Express the card name as a character string in the range from 1 to 20 bytes.

KDJF5011-E
The specified card is not registered.

(S)

Terminates ftstran command processing.

(O)

Check the card name. To register a card, see 3.4 Registering transmission information.

KDJF5012-E
The JP1/FTP server is not running.

(S)

Terminates ftstran command processing.

(O)

Start the JP1/FTP daemon. For details about starting the JP1/FTP daemon, see 2.4.1 Starting and terminating the JP1/FTP daemon.

KDJF5013-E
A function error occurred.
(Function name : func , Error code : errno).

A function error occurred.

(S)

Terminates ftstran command processing.

(O)

For details about the error number, see the extended error information for the corresponding function in 7. API Library.

KDJF5014-E
The card information is unacquirable. - func(errno)

A system call error occurred while card information was being acquired.

(S)

Terminates ftstran command processing.

(O)

For details about the error number, see the error numbers for the corresponding system function.

KDJF5015-E
The remote host name is too long.

(S)

Terminates ftstran command processing.

(O)

Express the host name as a character string in the range from 1 to 256 bytes.

KDJF5016-E
The name of a user to log in is too long.

(S)

Terminates ftstran command processing.

(O)

Express the user name as a character string in the range from 1 to 80 bytes.

KDJF5017-E
The password is too long.

(S)

Terminates ftstran command processing.

(O)

Express the password as a character string in the range from 1 to 80 bytes.

KDJF5018-E
Specify the port number with an integer.

The port number contains a nonnumeric character.

(S)

Terminates ftstran command processing.

(O)

Specify the port number as all numeric characters.

KDJF5019-E
Specify the port number in the range from 1 to 65535.

(S)

Terminates ftstran command processing.

(O)

Express the port number as an integer in the range from 1 to 65,535.

KDJF5020-E
Specify SEND, RECV, or APPE after the -TT option.

Neither SEND (send (overwrite)), nor RECV (receive), nor APPE (send (append)) is specified after the -TT option.

(S)

Terminates ftstran command processing.

(O)

Specify SEND (send (overwrite)), RECV (receive), or APPE (send (append)) after the -TT option.

KDJF5021-E
Specify ASCII or BINARY after the -TY option.

Neither ASCII nor BINARY is specified after the -TY option.

(S)

Terminates ftstran command processing.

(O)

Specify either ASCII or BINARY after the -TY option.

KDJF5022-E
Specify STREAM or COMPRESS after the -TM option.

Neither STREAM (do not compress) nor COMPRESS (compress) is specified after the -TM option.

(S)

Terminates ftstran command processing.

(O)

Specify either STREAM (do not compress) or COMPRESS (compress) after the -TM option.

KDJF5023-E
The local file name is too long.

(S)

Terminates ftstran command processing.

(O)

Express the local file name as a character string in the range from 1 to 256 bytes.

KDJF5024-E
The remote file name is too long.

(S)

Terminates ftstran command processing.

(O)

Express the remote file name as a character string in the range from 1 to 256 bytes.

KDJF5025-E
The name of the program that starts when file transmission ends normally is too long.

(S)

Terminates ftstran command processing.

(O)

Express the name of the program to start when transmission ends normally as a character string in the range from 1 to 256 bytes.

KDJF5026-E
The name of the program that starts when file transmission ends abnormally is too long.

(S)

Terminates ftstran command processing.

(O)

Express the name of the program to start when transmission ends abnormally as a character string in the range from 1 to 256 bytes.

KDJF5027-E
The FTP command is too long.

(S)

Terminates ftstran command processing.

(O)

Express the FTP command as a character string in the range from 1 to 300 bytes.

KDJF5028-E
The comment is too long.

(S)

Terminates ftstran command processing.

(O)

Express the comment as a character string in the range from 1 to 80 bytes.

KDJF5029-E
Specify the name of the program that starts when file transmission ends normally with a full-path name.

(S)

Terminates ftstran command processing.

(O)

Express the name of the program to start when transmission ends normally as a full path beginning with a forward slash (/).

KDJF5030-E
Specify the name of the program that starts when file transmission ends abnormally with a full-path name.

(S)

Terminates ftstran command processing.

(O)

Express the name of the program to start when transmission ends abnormally as a full path beginning with a forward slash (/).

KDJF5031-E
Specify CHECK or UNCHECK after the -TK option.

Neither CHECK (with size checking) nor UNCHECK (without size checking) is specified after the -TK option.

(S)

Terminates ftstran command processing.

(O)

Specify either CHECK (with size checking) or UNCHECK (without size checking) after the -TK option.

KDJF5032-E
The card name is empty.

The null character string was specified for the card name.

(S)

Terminates ftstran command processing.

(O)

Specify a non-null character string for the card name.

KDJF5033-E
The remote host name is empty.

The null character string was specified for the host name.

(S)

Terminates ftstran command processing.

(O)

Specify a non-null character string for the host name.

KDJF5034-E
The name of a user to log in is empty.

The null character string was specified for the user name.

(S)

Terminates ftstran command processing.

(O)

Specify a non-null character string for the user name.

KDJF5035-E
The local file name is empty.

The null character string was specified for the local file name.

(S)

Terminates ftstran command processing.

(O)

Specify a non-null character string for the local file name.

KDJF5036-E
The remote file name is empty.

The null character string was specified for the remote file name.

(S)

Terminates ftstran command processing.

(O)

Specify a non-null character string for the remote file name.

KDJF5047-E
Specify AUTO, MULTIPLE or SINGLE after the -TA option.

Neither AUTO (switch automatically), nor MULTIPLE (perform multiple-file transmission), nor SINGLE (perform single-file transmission) is specified after the -TA option.

(S)

Terminates ftstran command processing.

(O)

Specify AUTO (switch automatically), or MULTIPLE (perform multiple-file transmission), or SINGLE (perform single-file transmission) after the -TA option.

[Contents][Back][Next]

[Trademarks]