Job Management Partner 1/File Transmission Server/FTP Description, Reference and Operator's Guide

8.2.6 Messages issued by the ftsutil command

These messages are output to the terminal used to execute the command.

KDJF5101-E
Invalid option.- - opt

An invalid opt option was specified.

(S)

Terminates ftsutil command processing.

(O)

Check and, if necessary, revise the specified options.

KDJF5102-E
Duplicated option.- - opt

The opt option was specified more than once.

(S)

Terminates ftsutil command processing.

(O)

Check and, if necessary, revise the specified options.

KDJF5103-W
Usage: ftsutil -C environment_information_option environment_information_option_parameter
ftsutil -L

The operands are not specified correctly.

(S)

Terminates ftsutil command processing.

(O)

Check and, if necessary, revise the specified operands.

KDJF5104-E
A function error occurred.
(Function name : func , Error code : errno)

A function error occurred.

func: Function name, errno: Error number

(S)

Terminates ftsutil command processing.

(O)

For details about the error number, see the error numbers for the corresponding system function.

KDJF5105-E
Permission denied.

The user does not have superuser permissions.

(S)

Terminates ftsutil command processing.

(O)

Execute the command using superuser permissions.

KDJF5111-E
Specify No. of file transmissions to log using integral numbers.

The specification of the number of log entries to be retained contains a nonnumeric character.

(S)

Terminates ftsutil command processing.

(O)

Specify numeric characters only for the number of log entries to be retained.

KDJF5112-E
Specify No. of file transmissions to log in the range from 0 to 100000.
(In Linux (IPF version):)
Specify No. of file transmissions to log in the range from 0 to 1000000.

The number of log entries to be retained is not an integer in the range from 0 to 100,000.

In Linux (IPF version), the number of log entries to be retained is not an integer in the range from 0 to 1,000,000.

(S)

Terminates ftsutil command processing.

(O)

Express the number of log entries to be retained as an integer in the range from 0 to 100,000.

In Linux (IPF version), express the number of log entries to be retained as an integer in the range from 0 to 1,000,000.

KDJF5113-E
Specify the size of protocol trace file using integral numbers.

The specification of the protocol trace file size contains a nonnumeric character.

(S)

Terminates ftsutil command processing.

(O)

Specify numeric characters only for the protocol trace file size.

KDJF5114-E
Specify the size of protocol trace file in the range from 4 to 1000.
(In Linux (IPF version):)
Specify the size of protocol trace file in the range from 4 to 10000.

The size of the protocol trace file is not an integer in the range from 4 to 1,000.

In Linux (IPF version), the size of the protocol trace file is not an integer in the range from 4 to 10,000.

(S)

Terminates ftsutil command processing.

(O)

Express the size of the protocol trace file as an integer in the range from 4 to 1,000.

In Linux (IPF version), express the size of the protocol trace file as an integer in the range from 4 to 10,000.

KDJF5115-E
Specify the size of module trace file using integral numbers.

The specification of the module trace file size contains a nonnumeric character.

(S)

Terminates ftsutil command processing.

(O)

Specify numeric characters only for the module trace file size.

KDJF5116-E
Specify the size of module trace file in the range from 4 to 1000.
(In Linux (IPF version):)
Specify the size of module trace file in the range from 4 to 10000.

The size of the module trace file is not an integer in the range from 4 to 1,000.

In Linux (IPF version), the size of the module trace file is not an integer in the range from 4 to 10,000.

(S)

Terminates ftsutil command processing.

(O)

Express the size of the module trace file as an integer in the range from 4 to 1,000.

In Linux (IPF version), express the size of the module trace file as an integer in the range from 4 to 10,000.

KDJF5117-E
Specify No. of retries when connecting to a host using integral numbers.

The specification of the number of retries for establishing connection with a host contains a nonnumeric character.

(S)

Terminates ftsutil command processing.

(O)

Specify numeric characters only for the number of retries for establishing connection with a host.

KDJF5118-E
Specify No. of retries when connecting to a host in the range from 0 to 100000.

The number of retries for establishing connection with a host is not an integer in the range from 0 to 100,000.

(S)

Terminates ftsutil command processing.

(O)

Express the number of retries for establishing connection with a host as an integer in the range from 0 to 100,000.

KDJF5119-E
Specify the retry interval when connecting to a host using integral numbers.

The specification of the retry interval for establishing connection with a host contains a nonnumeric character.

(S)

Terminates ftsutil command processing.

(O)

Specify numeric characters only for the retry interval for establishing connection with a host.

KDJF5120-E
Specify the retry interval when connecting to a host in the range from 0 to 86400.

The retry interval for establishing connection with a host is not an integer in the range from 0 to 86,400.

(S)

Terminates ftsutil command processing.

(O)

Express the retry interval for establishing connection with a host as an integer in the range from 0 to 86,400.

KDJF5121-E
Specify the time-limit waiting to send data using integral numbers.

The specification of the time limit for waiting to send data contains a nonnumeric character.

(S)

Terminates ftsutil command processing.

(O)

Specify numeric characters only for the time limit for waiting to send data.

KDJF5122-E
Specify the time-limit waiting to send data in the range from 1 to 3600.

The time limit for waiting to send data is not an integer in the range from 1 to 3,600.

(S)

Terminates ftsutil command processing.

(O)

Express the time limit for waiting to send data as an integer in the range from 1 to 3,600.

KDJF5123-E
Specify the time-limit waiting to receive data using integral numbers.

The specification of the time limit for waiting to receive data contains a nonnumeric character.

(S)

Terminates ftsutil command processing.

(O)

Specify numeric characters only for the time limit for waiting to receive data.

KDJF5124-E
Specify the time-limit waiting to receive data in the range from 1 to 3600.

The time limit for waiting to receive data is not an integer in the range from 1 to 3,600.

(S)

Terminates ftsutil command processing.

(O)

Express the time limit for waiting to receive data as an integer in the range from 1 to 3,600.

KDJF5125-E
Specify the size of sending buffer for the server using integral numbers.

The size of the sending buffer for the server contains a nonnumeric character.

(S)

Terminates ftsutil command processing.

(O)

Specify numeric characters only for the size of the sending buffer for the server.

KDJF5126-E
Specify the size of sending buffer for the server in the range from 512 to 262144

The size of the sending buffer for the server is not an integer in the range from 512 to 262,144.

(S)

Terminates ftsutil command processing.

(O)

Express the size of the sending buffer for the server as an integer in the range from 512 to 262,144.

KDJF5127-E
Specify the size of receiving buffer for the server using integral numbers.

The specification of the size of the receiving buffer for the server contains a nonnumeric character.

(S)

Terminates ftsutil command processing.

(O)

Specify numeric characters only for the size of the receiving buffer for the server.

KDJF5128-E
Specify the size of receiving buffer for the server in the range from 512 to 262144.

The size of the receiving buffer for the server is not an integer in the range from 512 to 262,144.

(S)

Terminates ftsutil command processing.

(O)

Express the size of the receiving buffer for the server as an integer in the range from 512 to 262,144.

KDJF5129-E
Specify the time-limit of idle connection for the server using integral numbers.

The specification of the time limit for an idle connection for the server contains a nonnumeric character.

(S)

Terminates ftsutil command processing.

(O)

Specify numeric characters only for the time limit for an idle connection for the server.

KDJF5130-E
Specify the time-limit of idle connection for the server in the range from 30 to 7200.

The time limit for an idle connection for the server is not an integer in the range from 30 to 7,200.

(S)

Terminates ftsutil command processing.

(O)

Express the time limit for an idle connection for the server as an integer in the range from 30 to 7,200.

KDJF5131-E
Specify the file creation mask for the server using octal numbers.

The file creation mask for the server contains non-octal characters.

(S)

Terminates ftsutil command processing.

(O)

Express the file creation mask for the server using octal characters.

KDJF5132-E
Specify the file creation mask for the server in the range from 000 to 777.

The file creation mask for the server is not an octal number in the range from 000 to 777.

(S)

Terminates ftsutil command processing.

(O)

Express the file creation mask for the server as an octal number in the range from 000 to 777.

KDJF5133-E
Specify the size of sending buffer for the client using integral numbers.

The specification of the size of the sending buffer for the client contains a nonnumeric character.

(S)

Terminates ftsutil command processing.

(O)

Specify numeric characters only for the size of the sending buffer for the client.

KDJF5134-E
Specify the size of sending buffer for the client in the range from 512 to 262144.

The size of the sending buffer for the client is not an integer in the range from 512 to 262,144.

(S)

Terminates ftsutil command processing.

(O)

Express the size of the sending buffer for the client as an integer in the range from 512 to 262,144.

KDJF5135-E
Specify the size of receiving buffer for the client using integral numbers.

The specification of the size of the receiving buffer for the client contains a nonnumeric character.

(S)

Terminates ftsutil command processing.

(O)

Specify numeric characters only for the size of the receiving buffer for the client.

KDJF5136-E
Specify the size of receiving buffer for the client in the range from 512 to 262144.

The size of the receiving buffer for the client is not an integer in the range from 512 to 262,144.

(S)

Terminates ftsutil command processing.

(O)

Express the size of the receiving buffer for the client as an integer in the range from 512 to 262,144.

KDJF5137-E
Specify the file creation mask for the client using octal numbers.

The file creation mask for the client contains non-octal characters.

(S)

Terminates ftsutil command processing.

(O)

Express the file creation mask for the client using octal characters.

KDJF5138-E
Specify the file creation mask for the client in the range from 000 to 777.

The file creation mask for the client is not an octal number in the range from 000 to 777.

(S)

Terminates ftsutil command processing.

(O)

Express the file creation mask for the client as an octal number in the range from 000 to 777.

KDJF5139-E
Specify CHECK or UNCHECK after -EI option.

Neither CHECK (with JP1 event issuance) nor UNCHECK (without JP1 event issuance) is specified after the -EI option.

(S)

Terminates ftsutil command processing.

(O)

Specify either CHECK (with JP1 event issuance) or UNCHECK (without JP1 event issuance) after the -EI option.

KDJF5140-E
Specify CHECK or UNCHECK after -EL option.

Neither CHECK (with system log output) nor UNCHECK (without system log output) is specified after the -EL option.

(S)

Terminates ftsutil command processing.

(O)

Specify either CHECK (with system log output) or UNCHECK (without system log output) after the -EL option.

KDJF5142-E
Specify the maximum number of concurrent transmissions using integral numbers.

The specification of the maximum number of concurrent transmissions contains a nonnumeric character.

(S)

Terminates ftsutil command processing.

(O)

Specify numeric characters only for the maximum number of concurrent transmissions.

KDJF5143-E
Specify the maximum number of concurrent transmissions in the range from 64 to 128.

The maximum number of concurrent transmissions is not an integer in the range from 64 to 128.

(S)

Terminates ftsutil command processing.

(O)

Express the maximum number of concurrent transmissions as an integer in the range from 64 to 128.

KDJF5144-E
Specify the size of access log file using integral numbers.

The specification of the access log file size contains a nonnumeric character.

(S)

Terminates ftsutil command processing.

(O)

Specify numeric characters only for the access log file size.

KDJF5145-E
Specify the size of access log file in the range from 0 to 100.

The size of the access log file is not an integer in the range from 0 to 100.

(S)

Terminates ftsutil command processing.

(O)

Express the size of the access log file as an integer in the range from 0 to 100.

KDJF5152-E
Specify CHECK or UNCHECK after the -EX option.

Neither CHECK (with FTP connection response message control) nor UNCHECK (without FTP connection response message control) is specified after the -EX option.

(S)

Terminates ftsutil command processing.

(O)

Specify either CHECK (with FTP connection response message control) or UNCHECK (without FTP connection response message control) after the -EX option.

[Contents][Back][Next]

[Trademarks]