Job Management Partner 1/Client Security Control Description, User's Guide and Operator's Guide

[Contents][Glossary][Index][Back][Next]

17.3.2 List of JP1/CSC - Manager Remote Option messages

This subsection lists the messages of JP1/CSC - Manager Remote Option.

KDSL3201-I

Setup of the remote option environment was successful.

JP1/CSC - Manager Remote Option was successfully configured.

(S)
Ends the configuration for JP1/CSC - Manager Remote Option.

KDSL3202-E

An attempt to set up the remote option environment has failed. Execution permissions are lacking.

JP1/CSC - Manager Remote Option could not be configured because an unauthorized user attempted the configuration.

(S)
Cancels the configuration of JP1/CSC - Manager Remote Option.

(O)
Check the user role and reconfigure JP1/CSC - Manager Remote Option.

KDSL3203-E

An attempt to set up the remote option environment has failed. A file I/O error occurred. (error code = [error-code])

JP1/CSC - Manager Remote Option could not be configured because an I/O error occurred.

(S)
Cancels the configuration of JP1/CSC - Manager Remote Option.

(O)
Check whether the disk has sufficient free space or whether an error occurred in the file system. If the problem is not resolved, contact the system administrator.

KDSL3204-E

An attempt to set up the remote option environment has failed. An internal error occurred. (error code = [error-code])

JP1/CSC - Manager Remote Option could not be configured because an internal error occurred.

(S)
Cancels the configuration of JP1/CSC - Manager Remote Option.

(O)
Contact the system administrator.

KDSL3205-I

The remote option has started.

JP1/CSC - Manager Remote Option has started.

(S)
Started JP1/CSC - Manager Remote Option.

KDSL3206-W

The remote option has terminated.

JP1/CSC - Manager Remote Option has ended.

(S)
Ended JP1/CSC - Manager Remote Option.

KDSL3207-E

An attempt to start the remote option has failed. Remote option setup has not been completed. (error code = [error-code])

JP1/CSC - Manager Remote Option could not be started because JP1/CSC - Manager Remote Option was not completely set up.

(S)
Cancels the startup of JP1/CSC - Manager Remote Option.

(O)
Set up JP1/CSC - Manager Remote Option and then start it again. If the problem is not resolved, contact the system administrator.

KDSL3208-E

An attempt to start the remote option has failed. The communication environment cannot be initialized. (error code = [error-code])

JP1/CSC - Manager Remote Option could not be started because the port number specified during setup was not available.

(S)
Cancels the startup of JP1/CSC - Manager Remote Option.

(O)
Check whether the port number specified in the Client Security Control - Manager Remote Option Setup dialog box is available. If the port number cannot be used, specify a port number that can be used and reconfigure JP1/CSC - Manager Remote Option.

KDSL3209-E

An attempt to start the remote option has failed. An error occurred during a module call to the anti-virus product information acquisition. (error code = [error-code])

JP1/CSC - Manager Remote Option could not be started because an error occurred during a call to the anti-virus product information acquisition module.

(S)
Cancels the startup of JP1/CSC - Manager Remote Option.

(O)
Contact the system administrator.

KDSL3210-E

An attempt to start the remote option has failed. An internal error occurred. (error code = [error-code])

JP1/CSC - Manager Remote Option could not be started because an internal error occurred.

(S)
Cancels the startup of JP1/CSC - Manager Remote Option.

(O)
Contact the system administrator.

KDSL3211-E

An attempt to terminate the remote option has failed. An internal error occurred. (error code = [error-code])

An internal error occurred when JP1/CSC - Manager Remote Option was ending.

(S)
Ends JP1/CSC - Manager Remote Option.

(O)
Contact the system administrator.

KDSL3212-I

The policy update request for the anti-virus product will now start.

JP1/CSC - Manager Remote Option will send a request to update the judgment policy of the anti-virus product.

(S)
Outputs the message and continues processing of JP1/CSC - Manager Remote Option.

KDSL3213-I

The policy update request for the anti-virus product will now end.

JP1/CSC - Manager Remote Option has finished sending a request to update the judgment policy of the anti-virus product.

(S)
Outputs the message and continues processing of JP1/CSC - Manager Remote Option.

KDSL3214-E

An attempt to connect with the remote service has failed. (error code = [error-code])

Failed to establish connection to JP1/CSC - Manager Remote Option.

(S)
Outputs the message and continues the startup processing of JP1/CSC - Manager Remote Option.

(O)
Check whether an error occurred in JP1/CSC - Manager. Check whether the communication between JP1/CSC - Manager and JP1/CSC - Manager Remote Option is normal.

KDSL3215-E

An attempt to send a message to the remote service has failed. A communication error occurred. (error code = [error-code])

The message could not be sent to JP1/CSC - Manager Remote Option because a communication error occurred.

(S)
Outputs the message and terminates JP1/CSC - Manager Remote Option, or continues processing if JP1/CSC - Manager Remote Option is requesting a policy update of the anti-virus product.

(O)
Check whether an error occurred in JP1/CSC - Manager. Check whether the communication between JP1/CSC - Manager and JP1/CSC - Manager Remote Option is normal.

KDSL3216-E

An attempt to request a policy update of the anti-virus product has failed. An internal error occurred. (error code = [error-code])

JP1/CSC - Manager Remote Option could not request a policy update of the anti-virus product because an internal error occurred.

(S)
Outputs the message and continues processing of JP1/CSC - Manager Remote Option.

(O)
Contact the system administrator.

KDSL3217-E

Error notification for the remote option has failed. An internal error occurred. (error code = [error-code])

Error notification for JP1/CSC - Manager Remote Option failed because an internal error occurred.

(S)
Outputs the message and continues processing of JP1/CSC - Manager Remote Option.

(O)
Contact the system administrator.

KDSL3218-E

An internal error occurred with the remote option. (error code = [error-code])

An internal error occurred in JP1/CSC - Manager Remote Option.

(S)
Outputs the message and ends JP1/CSC - Manager Remote Option.

(O)
Contact the system administrator.

KDSL3219-I

The anti-virus product information has not been changed.

There were no changes to the anti-virus product information.

(S)
Outputs the message and continues processing of JP1/CSC - Manager Remote Option.

KDSL3220-E

An attempt to request a policy update for the anti-virus product has failed. An attempt to authenticate the IP address of the remote service has failed.

A request to update the judgment policy of the anti-virus product failed because the IP address for JP1/CSC - Manager Remote Option could not be authenticated.

(S)
Outputs the message and continues processing of JP1/CSC - Manager Remote Option.

(O)
Check the IP address of the remote option in the Client Security Control - Manager Setup dialog box.

KDSL3221-I

The policy update for the anti-virus product was successful. (updated information = [updated-information])

The judgment policy of the anti-virus product was updated successfully.

(S)
Outputs the message and continues processing of JP1/CSC - Manager Remote Option.

KDSL3222-E

An attempt to update the policy for the anti-virus product has failed. An error occurred in the remote option. (error code = [error-code])

The policy of the anti-virus product could not be updated because an error occurred in JP1/CSC - Manager Remote Option.

(S)
Outputs the message and continues processing of JP1/CSC - Manager Remote Option.

(O)
Contact the system administrator.

KDSL3223-E

An attempt to start the remote option has failed. The anti-virus product is not installed. (anti-virus product name = [anti-virus-product-name])

JP1/CSC - Manager Remote Option could not be started because an anti-virus product is not installed.

(S)
Cancels the startup of JP1/CSC - Manager Remote Option.

(O)
Check whether the anti-virus product specified in the Client Security Control - Manager Remote Option Setup dialog box has been installed.

KDSL3224-I

The anti-virus product information has been updated. (renewal date = [renewal-date], updated information = [updated-information])

Information about the anti-virus product was updated.

(S)
Outputs the message and continues processing of JP1/CSC - Manager Remote Option.

KDSL3225-I

The anti-virus product information has been sent. (renewal date = [renewal-date], updated information = [updated-information])

Information about the anti-virus product was sent to JP1/CSC - Manager.

(S)
Outputs the message and continues processing of JP1/CSC - Manager Remote Option.

KDSL3226-E

A file I/O error occurred in the remote option. (error code = [error-code])

Information about the anti-virus product could not be updated because a file I/O error occurred in JP1/CSC - Manager Remote Option.

(S)
Outputs the message and continues processing of JP1/CSC - Manager Remote Option.

(O)
Check whether the disk has sufficient free space or an error occurred in the file system. If the problem is not resolved, contact the system administrator.

KDSL3301-I

The network connection control request was executed.

JP1/CSC - Manager Remote Option has sent a network connection control request.

(S)
Ends the command.

KDSL3302-E

An attempt to control the network connection has failed. Command execution permissions are lacking.

JP1/CSC - Manager Remote Option could not control network connections because the user who executed the command was not authorized to do so.

(S)
Ends the command.

(O)
An administrator role user must execute the command.

KDSL3303-E

An attempt to control the network connection has failed. The MAC address format is invalid.

JP1/CSC - Manager Remote Option could not control network connections because the specified MAC address was formatted incorrectly.

(S)
Ends the command.

(O)
Check the MAC address format, and then try the command again.

KDSL3304-E

An attempt to control the network connection has failed. The IP address format is invalid.

JP1/CSC - Manager Remote Option could not control network connections because the specified IP address was formatted incorrectly.

(S)
Ends the command.

(O)
Check the IP address format, and then try the command again.

KDSL3305-E

An attempt to control the network connection has failed. The host name length is invalid.

JP1/CSC - Manager Remote Option could not control network connections because the specified host name is the wrong length.

(S)
Ends the command.

(O)
Check the length of the host name, and then try the command again.

KDSL3306-E

An attempt to control the network connection has failed. A file I/O error occurred.

JP1/CSC - Manager Remote Option could not control network connections because an I/O error occurred.

(S)
Ends the command.

(O)
Check whether the disk has sufficient free space or whether an error occurred in the file system. If the problem is not resolved, contact the system administrator.

KDSL3307-E

An attempt to control the network connection has failed. Setup has not been completed.

JP1/CSC - Manager Remote Option could not control network connections because JP1/CSC - Manager Remote Option was not completely set up.

(S)
Ends the command.

(O)
Set up JP1/CSC - Manager Remote Option and then try the command again. If the problem is not resolved, contact the system administrator.

KDSL3308-E

An attempt to control the network connection has failed. The contents of the network connection control list file are invalid. (line number = [line-number])

JP1/CSC - Manager Remote Option could not control network connections because the content of the network connection control list was incorrect.

(S)
Ends the command.

(O)
Check whether the content of the network connection control list is correct.

KDSL3309-E

An attempt to control the network connection has failed. A communication error occurred.

JP1/CSC - Manager Remote Option could not control network connections because a communication error occurred.

(S)
Ends the command.

(O)
Check whether an error occurred in JP1/CSC - Manager. Check whether the communication between JP1/CSC - Manager and JP1/CSC - Manager Remote Option is normal.

KDSL3310-E

An attempt to control the network connection has failed. An attempt to authenticate the IP address with the manager failed.

JP1/CSC - Manager Remote Option could not control network connections because the IP address of JP1/CSC - Manager could not be authenticated.

(S)
Ends the command.

(O)
Check whether the port number specified in the Client Security Control - Manager Remote Option Setup dialog box is available. If the port number cannot be used, specify a port number that can be used and reconfigure the JP1/CSC - Manager Remote Option environment.

KDSL3311-E

An attempt to control the network connection has failed. An error occurred in the manager.

JP1/CSC - Manager Remote Option could not control network connections because an error occurred in JP1/CSC - Manager.

(S)
Ends the command.

(O)
Contact the system administrator.

KDSL3312-E

An attempt to control the network connection has failed. An internal error occurred.

JP1/CSC - Manager Remote Option could not control network connections because an internal error occurred.

(S)
Ends the command.

(O)
Contact the system administrator.

KDSL3400-E

An attempt to start the remote option has failed.

JP1/CSC - Manager Remote Option could not be started.

(S)
Cancels the startup processing of JP1/CSC - Manager Remote Option.

(O)
Contact the system administrator.

KDSL3401-E

An attempt to terminate the remote option has failed.

JP1/CSC - Manager Remote Option could not be shut down.

(S)
Terminates JP1/CSC - Manager Remote Option.

(O)
Contact the system administrator.

KDSL3402-E

An attempt to set up the remote option environment has failed.

JP1/CSC - Manager Remote Option could not be configured.

(S)
Cancels the configuration of JP1/CSC - Manager Remote Option.

(O)
Contact the system administrator.

[Contents][Back][Next]

[Trademarks]

All Rights Reserved. Copyright (C) 2009, 2011, Hitachi, Ltd.
Copyright, patent, trademark, and other intellectual property rights related to the "TMEng.dll" file are owned exclusively by Trend Micro Incorporated