Job Management Partner 1/Client Security Control Description, User's Guide and Operator's Guide

[Contents][Glossary][Index][Back][Next]

17.3.3 List of JP1/CSC - Agent messages

This subsection lists the messages of JP1/CSC - Agent.

Organization of this subsection
(1) Messages regarding JP1/CSC - Agent (5000 to 5999)
(2) Messages regarding quarantine system operation (6000 to 6200)

(1) Messages regarding JP1/CSC - Agent (5000 to 5999)

KDSL5000-I

Setup of the agent environment was successful.

JP1/CSC - Agent was successfully configured.

(S)
Ends the configuration of JP1/CSC - Agent.

KDSL5001-E

An attempt to set up the agent environment has failed. Execution permissions are lacking.

JP1/CSC - Agent could not be configured because an unauthorized user attempted the configuration.

(S)
Cancels the configuration of JP1/CSC - Agent.

(O)
Check the user role and reconfigure JP1/CSC - Agent.

KDSL5002-E

An attempt to set up the agent environment has failed. A file I/O error occurred. (error code = [error-code])

JP1/CSC - Agent could not be configured because a file I/O error occurred.

(S)
Cancels the configuration of JP1/CSC - Agent.

(O)
Check whether the disk has sufficient free space or an error occurred in the file system. If the problem is not resolved, contact the system administrator.

KDSL5003-E

An attempt to set up the agent environment has failed. An internal error occurred. (error code = [error-code])

JP1/CSC - Agent could not be configured because an internal error occurred.

(S)
Cancels the configuration of JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL5100-I

The agent has started.

JP1/CSC - Agent has started.

(S)
Started JP1/CSC - Agent.

KDSL5101-W

The agent has terminated.

JP1/CSC - Agent has ended.

(S)
Ended JP1/CSC - Agent.

KDSL5102-E

An attempt to start an agent has failed. Agent setup has not been completed. (error code = [error-code])

JP1/CSC - Agent could not be started because it was not completely set up.

(S)
Cancels the startup processing of JP1/CSC - Agent.

(O)
Complete the setup of JP1/CSC - Agent and then start it again. If the problem is not resolved, contact the system administrator.

KDSL5103-E

An attempt to start an agent has failed. The communication environment cannot be initialized. (error code = [error-code])

JP1/CSC - Agent could not be started because the port number specified during setup was not available.

(S)
Cancels the startup processing (JP1/CSC - Agent).

(O)
Check whether the port number specified in the setup window of JP1/CSC - Agent is available. If the port number cannot be used, specify a port number that can be used and reconfigure JP1/CSC - Agent.

KDSL5104-E

An attempt to start an agent has failed. An error occurred during a module call to the network control product. (error code = [error-code])

JP1/CSC - Agent could not be started because an error occurred during the call to a module of the network control product.

(S)
Cancels the startup processing of JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL5105-E

An attempt to start an agent has failed. An internal error occurred. (error code = [error-code])

JP1/CSC - Agent could not be started because an internal error occurred.

(S)
Cancels the startup processing of JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL5106-E

An attempt to terminate an agent has failed. An internal error occurred. (error code = [error-code])

An internal error occurred when JP1/CSC - Agent was ending.

(S)
Ends JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL5107-E

An attempt to connect with a manager has failed. (error code = [error-code])

Failed to establish connection to JP1/CSC - Manager.

(S)
Outputs the message and continues the startup processing of JP1/CSC - Agent.

(O)
Check whether an error occurred in JP1/CSC - Manager. Check whether the communication between JP1/CSC - Manager and JP1/CSC - Agent is normal.

KDSL5108-E

An attempt to send a message to a manager has failed. A communication error occurred. (error code = [error-code])

The message could not be sent to JP1/CSC - Manager because a communication error occurred in JP1/CSC - Agent.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

(O)
Check whether an error occurred in JP1/CSC - Manager. Check whether the communication between JP1/CSC - Manager and JP1/CSC - Agent is normal.

KDSL5109-E

An attempt to receive a request from a manager has failed. (error code = [error-code])

The request from JP1/CSC - Manager could not be accepted.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

(O)
You do not need to take any action for this message.

KDSL5110-E

An attempt to start an agent has failed. Software Distribution Manager is either not installed or is an old version. (error code = [error-code])

JP1/CSC - Agent could not be started because JP1/Software Distribution Manager was not installed or the version was old.

(S)
Cancels the startup processing of JP1/CSC - Agent.

(O)
Check whether JP1/ Software Distribution Manager 08-10 or later is installed.

KDSL5200-I

A network connection refusal request to the network control product will now start.

JP1/CSC - Agent will send a network connection rejection request to the network control product.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

KDSL5201-I

A network connection refusal request to the network control product has terminated.

JP1/CSC - Agent sent a network connection rejection request to the network control product.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

KDSL5202-E

An attempt to request a network connection refusal to the network control product has failed. An error was detected in the network control product. (error code = [error-code])

JP1/CSC - Agent could not send a network connection rejection request to the network control product because an error was detected in the network control product.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

(O)
Check whether an error occurred in the network control product.

KDSL5203-E

An attempt to request network connection refusal to the network control product has failed. An internal error occurred. (error code = [error-code])

JP1/CSC - Agent could not send a network connection rejection request to the network control product because an internal error occurred in JP1/CSC - Agent.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL5204-I

A network connection permission request to the network control product will now start.

JP1/CSC - Agent will send a network connection permission request to the network control product.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

KDSL5205-I

A network connection permission request to the network control product has terminated.

JP1/CSC - Agent sent a network connection permission request to the network control product.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

KDSL5206-E

An attempt to request network connection permission to the network control product has failed. An error was detected in the network control product. (error code = [error-code])

JP1/CSC - Agent could not send a network connection permission request to the network control product because an error was detected in the network control product.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

(O)
Check whether an error occurred in the network control product.

KDSL5207-E

An attempt to request network connection permission to the network control product has failed. An internal error occurred. (error code = [error-code])

JP1/CSC - Agent could not send a network connection permission request to the network control product because an internal error occurred in JP1/CSC - Agent.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL5208-E

An attempt to request a network connection refusal to the network control product has failed. A file I/O error occurred. (error code = [error-code])

JP1/CSC - Agent could not send a network connection rejection request to the network control product because a file I/O error occurred.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL5209-E

An attempt to request network connection permission to the network control product has failed. A file I/O error occurred. (error code = [error-code])

JP1/CSC - Agent could not send a network connection permission request to the network control product because a file I/O error occurred.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL5300-E

An attempt to start an agent has failed.

JP1/CSC - Agent could not be started.

(S)
Cancels the startup processing of JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL5301-E

An attempt to terminate an agent has failed.

JP1/CSC - Agent could not be shut down.

(S)
Terminates JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL5302-E

An attempt to set up the agent environment has failed.

JP1/CSC - Agent could not be configured.

(S)
Cancels the configuration of JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL5303-E

An attempt to request network connection refusal from the network control product has failed.

JP1/CSC - Agent could not send a network connection rejection request to the network control product.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL5304-E

An attempt to request network connection permission from the network control product has failed.

JP1/CSC - Agent could not send a network connection permission request to the network control product.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

(O)
Contact the system administrator.

(2) Messages regarding quarantine system operation (6000 to 6200)

KDSL6000-E

An attempt to update the connection control list has failed. A file I/O error occurred. (MAC address = [MAC-address], error code = [error-code])

The connection control list could not be updated because a file I/O error occurred.

(S)
Outputs the message and ends processing of JP1/CSC - Agent.

(O)
Check whether the disk has sufficient free space or whether an error occurred in the file system.

KDSL6001-E

An attempt to search the connection control list has failed. A file I/O error occurred. (MAC address = [MAC-address], error code = [error-code])

The connection control list could not be searched because a file I/O error occurred.

(S)
Outputs the message and cancels processing of JP1/CSC - Agent.

(O)
Check whether the disk has sufficient free space or whether an error occurred in the file system.

KDSL6002-E

An attempt to search the connection control list has failed. An internal error occurred. (error code = [error-code])

The connection control list could not be searched because an internal error occurred in JP1/CSC - Agent.

(S)
Outputs the message and cancels processing of JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL6003-I

There is no MAC address in the connection control list. (MAC address = [MAC-address])

The MAC address was not found in the connection control list.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

(O)
Check the MAC address as required, and register it in the list manually.

KDSL6004-E

An attempt to update the connection control list has failed. An internal error occurred. (error code = [error-code])

The connection control list could not be updated because an internal error occurred in JP1/CSC - Agent.

(S)
Outputs the message and cancels processing of JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL6005-I

The connection control list has been updated.

The connection control list was updated.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

KDSL6006-E

An attempt to update the connection control list has failed.

The connection control list could not be updated.

(S)
Outputs the message and cancels processing of JP1/CSC - Agent.

(O)
Contact the system administrator.

KDSL6030-E

An attempt to confirm the connection status has failed. A file I/O error occurred. (MAC address = [MAC-address], error code = [error-code])

The connection status could not be confirmed because a file I/O error occurred.

(S)
Outputs the message and continues processing of JP1/CSC - Agent, connecting the client to the quarantined network or rejecting the network connection according to the JP1/CSC - Agent settings.

(O)
Check whether the disk has sufficient free space or whether an error occurred in the file system.

KDSL6032-E

An attempt to confirm the connection status has failed. An internal error occurred. (error code = [error-code])

The connection status could not be confirmed because an internal error occurred in JP1/CSC - Agent.

(S)
Outputs the message and continues processing of JP1/CSC - Agent, connecting the client to the quarantined network or rejecting the network connection according to the JP1/CSC - Agent settings.

(O)
Contact the system administrator.

KDSL6033-W

An attempt to confirm the connection status has failed. There is no MAC address. (MAC address = [MAC-address])

The connection status could not be confirmed because MAC-address was not found in the connection control list.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

KDSL6034-I

The authentication request has been received. (MAC address = [MAC-address])

An authentication request for MAC-address was received.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

KDSL6035-E

The authentication server is not set correctly. The VLAN is not set. (MAC address = [MAC-address])

The VLAN cannot be set because the authentication server has not been set up correctly for use with Microsoft IAS.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

(O)
The attribute that specifies VLAN-related information is missing from the RADIUS protocol. See 13.2.2 Setting up an authentication server, and review the settings of the authentication server.

KDSL6036-I

Connection to the normal network will now be performed. (MAC address = [MAC-address])

MAC-address will be connected to the normal network.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

KDSL6037-I

Connection to the quarantined network will now be performed. (MAC address = [MAC-address])

MAC-address will be connected to the quarantined network.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

KDSL6038-I

Connection to the refused network will now be performed. (MAC address = [MAC-address])

MAC-address will be rejected for network connection.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

KDSL6042-E

There is no MAC address in the communication packet.

There is no MAC address in the communication packet.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

KDSL6043-I

Connection to the unauthenticated network will now be performed. (MAC address = [MAC-address])

The client with the indicated MAC address will be connected to the unauthenticated network.

(S)
Outputs the message and continues processing of JP1/CSC - Agent.

KDSL6060-E

An attempt to save the connection history has failed. A file I/O error occurred. (MAC address = [MAC-address], connection destination = [Quarantined, Rejected, or Normal])

The connection history for MAC-address could not be saved because a file I/O error occurred.

(S)
Outputs the message and continues processing.

(O)
Check whether the disk has sufficient free space or whether an error occurred in the file system.

KDSL6061-E

An attempt to save the connection history has failed. An internal error occurred. (MAC address = [MAC-address], connection destination = [Quarantined, Rejected, or Normal], error code = [error-code])

The connection history for MAC-address could not be saved because a file I/O error occurred in JP1/CSC - Agent.

(S)
Outputs the message and continues processing, connecting the client to the quarantined network or denying the network connection according to the JP1/CSC - Agent settings.

(O)
Contact the system administrator.

KDSL6090-E

The message notification has failed. An internal error occurred. (IP address = [IP-address], message = [message], error code = [error-code])

Message message could not be sent to IP-address because of an internal error in JP1/CSC - Agent.

(S)
Outputs the message and continues processing.

(O)
Contact the system administrator.

KDSL6092-E

The message notification has failed. (command = [command])

The message could not be sent.

(S)
Outputs the message and continues processing.

KDSL6093-I

The message notification was successful. (IP address = [IP-address], message = [message])

The message message was sent to IP-address.

(S)
Outputs the message and continues processing.

KDSL6120-I

Importing terminated normally.

The connection control list was imported.

(S)
Ends the command.

KDSL6121-I

Exporting terminated normally.

The connection control list was exported.

(S)
Ends the command.

KDSL6122-I

Deletion of the asset information terminated normally.

The MAC address was deleted from the connection control list.

(S)
Ends the command.

KDSL6123-E

An attempt to import has failed. Execution permissions are lacking.

The connection control list could not be imported because the user who executed the command was not authorized to do so.

(S)
Ends the command.

(O)
An administrator role user must execute the command.

KDSL6124-E

An attempt to export has failed. Execution permissions are lacking.

The connection control list could not be exported because the user who executed the command was not authorized to do so.

(S)
Ends the command.

(O)
An administrator role user must execute the command.

KDSL6125-E

An attempt to delete asset information has failed. Execution permissions are lacking.

The MAC address could not be deleted from the connection control list because the user who executed the command was not authorized to do so.

(S)
Ends the command.

(O)
An administrator role user must execute the command.

KDSL6126-E

An attempt to import has failed. A file I/O error occurred. (error code = [error-code])

The connection control list could not be imported because a file I/O error occurred.

(S)
Ends the command.

(O)
Check whether the import file exists, and then try the command again.

KDSL6127-E

An attempt to export has failed. A file I/O error occurred. (error code = [error-code])

The connection control list could not be exported because a file I/O error occurred.

(S)
Ends the command.

(O)
Check the export file, and then try the command again.

KDSL6128-E

An attempt to delete asset information has failed. A file I/O error occurred. (error code = [error-code])

The MAC address could not be deleted from the connection control list because a file I/O error occurred.

(S)
Ends the command.

(O)
Check whether the MAC address list file exists, and then try the command again.

KDSL6129-E

An attempt to import has failed. The file format is invalid.

The connection control list could not be imported because the import file was formatted incorrectly.

(S)
Ends the command.

(O)
Check the formatting of the import file, and then try the command again.

KDSL6130-E

An attempt to export has failed. The file format is invalid.

The connection control list could not be imported because the export file was formatted incorrectly.

(S)
Ends the command.

(O)
Check the formatting of the export file, and then try the command again.

KDSL6131-E

An attempt to delete asset information has failed. The file format is invalid.

The MAC address could not be deleted from the connection control list because the MAC address list file was formatted incorrectly.

(S)
Ends the command.

(O)
Check the formatting of the MAC address list file, and then try the command again.

KDSL6135-E

An attempt to import has failed. The agent is running.

The connection control list could not be imported because the command was executed while the JP1/CSC - Agent service was running.

(S)
Ends the command.

(O)
Stop the JP1/CSC - Agent service, and then try the command again.

KDSL6136-E

An attempt to delete asset information has failed. The agent is running.

The MAC address could not be deleted from the connection control list because the command was executed while the JP1/CSC - Agent service was running.

(S)
Ends the command.

(O)
Stop the JP1/CSC - Agent service, and then try the command again.

KDSL6137-E

An attempt to delete asset information has failed. The Internet Authentication Service or the Network Policy Server is running.

The MAC address could not be deleted from the connection control list because the command was executed while the Microsoft Internet Authentication Service or Network Policy Server service was running.

(S)
Ends the command.

(O)
Stop the Microsoft Internet Authentication Service or Network Policy Server service, and then try the command again.

KDSL6139-W

An attempt to delete asset information has failed. The MAC address is not in the connection control list. (MAC address = [MAC-address])

MAC-address could not be deleted because it was not in the connection control list.

(S)
Ends the command.

(O)
Specify a MAC address that is in the connection control list.

KDSL6140-E

An attempt to import has failed. An internal error occurred. (error code = [error-code])

The connection control list could not be imported because an internal error occurred in JP1/CSC - Agent.

(S)
Ends the command.

(O)
Contact the system administrator.

KDSL6141-E

An attempt to export has failed. An internal error occurred. (error code = [error-code])

The connection control list could not be exported because an internal error occurred in JP1/CSC - Agent.

(S)
Ends the command.

(O)
Contact the system administrator.

KDSL6142-E

An attempt to delete asset information has failed. An internal error occurred. (error code = [error-code])

The MAC address could not be deleted from the connection control list because an internal error occurred in JP1/CSC - Agent.

(S)
Ends the command.

(O)
Contact the system administrator.

KDSL6143-E

An attempt to delete asset information has failed. The MAC address format is invalid. (MAC address = [MAC-address])

The specified MAC address was formatted incorrectly and could not be deleted from the connection control list.

(S)
Ends the command.

(O)
Contact the system administrator.

KDSL6144-E

An attempt to export has failed. There is no connection control list.

There is no connection control list to export.

(S)
Outputs the message and cancels processing.

(O)
Create a connection control list, and then try the command again.

KDSL6145-E

An attempt to delete asset information has failed. There is no connection control list.

The asset information could not be deleted because there is no connection control list.

(S)
Outputs the message and cancels processing.

(O)
Create a connection control list, and then try the command again.

KDSL6146-E

An attempt to import has failed.

The connection control list could not be imported.

(S)
Ends the command.

(O)
Contact the system administrator.

KDSL6147-E

An attempt to export has failed.

The connection control list could not be exported.

(S)
Ends the command.

(O)
Contact the system administrator.

KDSL6148-E

An attempt to delete asset information has failed.

The asset information could not be deleted from the connection control list.

(S)
Ends the command.

(O)
Contact the system administrator.

KDSL6150-E

Initialization has failed. A file I/O error occurred. (error code = [error-code])

JP1/CSC - Agent could not be initialized because a file I/O error occurred.

(S)
Outputs the message and cancels processing.

(O)
Contact the system administrator.

KDSL6151-E

Initialization has failed. An internal error occurred. (error code = [error-code])

JP1/CSC - Agent could not be initialized because an internal error occurred.

(S)
Outputs the message and cancels processing.

(O)
Contact the system administrator.

KDSL6152-E

Setup has not been completed.

JP1/CSC - Agent was not completely set up.

(S)
Outputs the message and cancels processing.

(O)
Set up JP1/CSC - Agent.

KDSL6180-I

date, MAC-address, IP-address, connection-destination, VLAN-ID

A connection history message appears.

(S)
Outputs the message and continues processing.

[Contents][Back][Next]

[Trademarks]

All Rights Reserved. Copyright (C) 2009, 2011, Hitachi, Ltd.
Copyright, patent, trademark, and other intellectual property rights related to the "TMEng.dll" file are owned exclusively by Trend Micro Incorporated