Job Management Partner 1/Automatic Job Management System 3 Troubleshooting

[Contents][Glossary][Index][Back][Next]

Appendix C.1 Log entries output by the scheduler services

The following table lists the types of logs output to the scheduler information log files of JP1/AJS3.

Table C-1 Scheduler information log entries

Log entry type Log entry name Associated
message ID		 Associated
JP1 event		 Command name Operation from JP1/AJS3 - View
A001 Scheduler service started KAVS0200-I 00004100 ajsstart
jajs_spmd		 --
A002 Scheduler service terminated KAVS0201-I 00004101 ajsstop
jajs_spmd_stop		 --
A003 Scheduler service process terminated abnormally KAVS0204-E 00004130 -- --
A007 JP1/AJS3 - View connection KAVS0534-I None -- Connecting to a scheduler service
A008 JP1/AJS3 - View disconnection ended KAVS0535-I None -- Disconnecting from a scheduler service
A011 Scheduler information logging started KAVS0220-I None jajs_spmd --
A012 Scheduler information logging terminated KAVS0221-I None jajs_spmd_stop --
A013 Authentication denied KAVS1009-W None -- --
N001 Jobnet started KAVS0260-I 00004102 -- --
N002 Jobnet ended normally KAVS0261-I 00004103 -- --
N003 Jobnet ended abnormally KAVS0262-E 00004104 -- --
N004 Jobnet ended with warning KAVS0268-W 00004108 -- --
N005 Jobnet on hold KAVS0270-I 00004120 -- --
N006 Jobnet shut down KAVS0272-E 00004131 -- --
N007 KAVS0273-E
N008 Jobnet start delayed KAVS0275-I 00004122 -- --
N009 Jobnet end delayed KAVS0276-I 00004123 -- --
N010 Next schedule queuing KAVS0277-I 00004124 -- --
N011 Jobnet start condition monitoring started KAVS0240-I 00004140 -- --
N012 Jobnet start condition monitoring terminated KAVS0241-I 00004141 -- --
N013 Jobnet skipped so not executed KAVS0279-E 00004142 -- --
N014 All jobnet registrations canceled KAVS0267-I None ajsstart -c
jajs_spmd -cold		 --
N015 Start condition monitoring waiting to terminate KAVS1420-I 00004145 -- --
J001 Job started KAVS0263-I 00004105 -- --
J002 Job ended normally KAVS0264-I 00004106 -- --
J003 Job ended abnormally KAVS0265-E 00004107 -- --
J004 Job ended with warning KAVS0269-W 00004109 -- --
J005 Job on hold KAVS0271-I 00004121 -- --
J006 Job submission started KAVS0278-I 00004125 -- --
J007 Event job execution request started KAVS0242-I 00004126 -- --
J008 Job end delayed KAVS0248-I 00004127 -- --
J009 Job queuing canceled KAVS0266-I 0000410A -- --
C001 Scheduler service operation environment temporarily changed None None ajsalter --
C002 Scheduler service stopped None None ajsstop --
C003 Scheduler service started None None ajsstart --
C101 Jobnet registered None None ajsentry Register for Execution, or
in the Daily Schedule or Monthly Schedule window, specifying a root jobnet and adding a jobnet by clicking Add
C102 Registered jobnet canceled None None ajsleave Cancel Registration used
C103 Jobnet temporarily changed None None ajsplan Change Plan,
Change Hold Attribute,
Change Delay Monitor, or
Change Priority, or
in the Daily Schedule or Monthly Schedule window, specifying a nested jobnet and adding a jobnet by clicking Add
C104 Jobnet execution interrupted None None ajsintrpt Interrupt
C105 Jobnet rerun None None ajsrerun Rerun
C106 Jobnet suspended/released from suspension None None ajssuspend Suspension
C107 Jobnet registration for execution information imported None None ajsrgimport --
C108 Jobnet registered by import of jobnet registration for execution information None None ajsrgimport --
C201 Jobnet/job forcibly ended None None ajskill Kill
C202 Job status changed None None ajschgstat Change Job Status
C301 Unit definitions changed None None ajschange
ajschgjob
ajschgnet		 Changing a definition
C302 Unit deleted None None ajsdelete Delete
C303 Unit restored None None ajsrestore Restore
C304 Unit created None None ajsdefine New
C305 Unit copied or moved None None ajscopy Paste
C306 Unit imported None None

ajsimport
 --
C307 Jobnet released None None ajsrelease -a
or
ajsrelease -c		 Release Entry,
Release Cancel
C401 Calendar changed None None ajscalendar Changing a calendar
C502 Unit status displayed None None ajsshow --
C503 Unit definitions output None None ajsprint --
C504 Unit definitions backed up None None ajsbackup Backup
C506 Root jobnet schedule information output None None ajsschedule --
C507 Unit name output None None ajsname --
C508 Unit definitions exported None None ajsexport Package
C509 Unit status displayed (abnormal end) None None ajsshow --
C510 Unit definitions output (abnormal end) None None ajsprint --
C511 Unit definitions backed up (abnormal end) None None ajsbackup Backup
C512 Unit name output (abnormal end) None None ajsname --
C513 Jobnet registration for execution information exported None None ajsrgexport --
C514 Jobnet information output by export of jobnet registration for execution information None None ajsrgexport --
C515 Jobnet release information referenced None None ajsrelease -i --
I001 Command processing started None None ajsalter
ajsimport
ajsname
ajsprint
ajsschedule
ajsshow
ajsstart
ajsstop		 --
ajsbackup Backup
ajscalendar Changing a calendar
ajschange
ajschgjob
ajschgnet		 Changing a definition
ajschgstat Change Job Status
ajscopy Paste
ajsdefine New
ajsdelete Delete
ajsentry Register for Execution, or
in the Daily Schedule or Monthly Schedule window, specifying a root jobnet and adding a jobnet by clicking Add
ajsexport Package
ajsintrpt Interrupt
ajskill Kill
ajsleave Cancel Registration
ajsplan Change Plan,
Change Hold Attribute,
Change Delay Monitor, or
Change Priority, or
in the Daily Schedule or Monthly Schedule window, specifying a nested jobnet and adding a jobnet by clicking Add
ajsrelease Release Entry,
Release Cancel, or
viewing release information (by selecting the jobnet related to the release in the list area)
ajsrerun Rerun
ajsrestore Restore
ajsrgexport --
ajsrgimport --
ajssuspend Suspension
I002 Command-to-scheduler service processing request started None None ajschgstat Change Job Status
ajsentry Register for Execution, or
in the Daily Schedule or Monthly Schedule window, specifying a root jobnet and adding a jobnet by clicking Add
ajsintrpt Interrupt
ajskill Kill
ajsleave Cancel Registration
ajsplan Change Plan,
Change Hold Attribute,
Change Delay Monitor, or
Change Priority, or
in the Daily Schedule or Monthly Schedule window, specifying a nested jobnet and adding a jobnet by clicking Add
ajsrerun Rerun
ajssuspend Suspension

The formats and the items output are described below for each log entry. A [Figure] in the format of a log entry indicates a one-byte space.

Organization of this subsection
(1) Formats common to all log entries
(2) Formats of the Scheduler Service Started log entry
(3) Formats of the Scheduler Service Terminated log entry
(4) Formats of the Scheduler Service Process Terminated Abnormally log entry
(5) Formats of the JP1/AJS3 - View Connection log entry
(6) Formats of the JP1/AJS3 - View Disconnection log entry
(7) Formats of the Scheduler Information Logging Started log entry
(8) Formats of the Scheduler Information Logging Terminated log entry
(9) Formats of the Authentication (Login or User Mapping) Denied log entry
(10) Formats of the Jobnet Started log entry
(11) Formats of the Jobnet Ended Normally log entry
(12) Formats of the Jobnet Ended Abnormally log entry
(13) Formats of the Jobnet Ended with Warning log entry
(14) Formats of the Jobnet on Hold log entry
(15) Formats of the Jobnet Shut Down log entry (N006)
(16) Formats of the Jobnet Shut Down log entry (N007)
(17) Formats of the Jobnet Start Delayed log entry
(18) Formats of the Jobnet End Delayed log entry
(19) Formats of the Next Schedule Queuing log entry
(20) Formats of the Jobnet Start Condition Monitoring Started log entry
(21) Formats of the Jobnet Start Condition Monitoring Terminated log entry
(22) Formats of the Jobnet Skipped So Not Executed log entry
(23) Formats of the All Jobnet Registrations Canceled log entry
(24) Formats of the Start Condition Monitoring Waiting to Terminate log entry
(25) Formats of the Job Started log entry
(26) Formats of the Job Ended Normally log entry
(27) Formats of the Job Ended Abnormally log entry
(28) Formats of the Job Ended with Warning log entry
(29) Formats of the Job on Hold log entry
(30) Formats of the Job Submission Started log entry
(31) Formats of the Event Job Execution Request Started log entry
(32) Formats of the Job End Delayed log entry
(33) Formats of the Job Queuing Canceled log entry
(34) Formats of the Scheduler Service Operation Environment Temporarily Changed log entry
(35) Formats of the Scheduler Service Stopped log entry
(36) Formats of the Scheduler Service Started log entry
(37) Formats of the Jobnet Registered log entry
(38) Formats of the Registered Jobnet Canceled log entry
(39) Formats of the Jobnet Temporarily Changed log entry
(40) Formats of the Jobnet Execution Interrupted log entry
(41) Formats of the Jobnet Rerun log entry
(42) Formats of the Jobnet Suspended/Released from Suspension log entry
(43) Formats of the Jobnet Registration for Execution Information Imported log entry
(44) Formats of the Jobnet Registered by Import of Jobnet Registration for Execution Information log entry
(45) Formats of the Jobnet/Job Forcibly Ended log entry
(46) Formats of the Job Status Changed log entry
(47) Formats of the Unit Definitions Changed log entry
(48) Formats of the Unit Deleted log entry
(49) Formats of the Unit Restored log entry
(50) Formats of the Unit Created log entry
(51) Formats of the Unit Copied or Moved log entry
(52) Formats of the Unit Imported log entry
(53) Formats of the Jobnet Released log entry
(54) Formats of the Calendar Changed log entry
(55) Formats of the Unit Status Displayed log entry
(56) Formats of the Unit Definitions Output log entry
(57) Formats of the Unit Definitions Backed Up log entry
(58) Formats of the Root Jobnet Schedule Information Output log entry
(59) Formats of the Unit Name Output log entry
(60) Formats of the Unit Definitions Exported log entry
(61) Formats of the Unit Status Displayed (Abnormal End) log entry
(62) Formats of the Unit Definitions Output (Abnormal End) log entry
(63) Formats of the Unit Definitions Backed Up (Abnormal End) log entry
(64) Formats of the Unit Name Output (Abnormal End) log entry
(65) Formats of the Jobnet Registration for Execution Information Exported log entry
(66) Formats of the Jobnet Information Output by Export of Jobnet Registration for Execution Information log entry
(67) Formats of the Jobnet Release Information Referenced log entry
(68) Formats of the Command Processing Started log entry
(69) Formats of the Command-to-Scheduler Service Processing Request Started log entry

(1) Formats common to all log entries

The formats described below are common to all entries in the scheduler service logs.

You can select whether to include a process ID in the log information as follows.

Make the selection by using the jajs_config command to set the LOGHEADER or HOSTLOGHEADER environment setting parameter. If you do not want to include a process ID, specify none. If you want to include a process ID, specify PID.

For details about these environment setting parameters, see 2.2(62) LOGHEADER and 2.1(13) HOSTLOGHEADER in the Job Management Partner 1/Automatic Job Management System 3 Configuration Guide 2.

Table C-2 Log entry formats with and without a process ID

Process ID setting Log entry format
If you do not want to include a process ID, specify PID in the LOGHEADER or HOSTLOGHEADER environment setting parameter. log-number[Figure]date[Figure]time[Figure]additional-information[Figure]
To include a process ID, specify none in the LOGHEADER or HOSTLOGHEADER environment setting parameter. log-number[Figure]date[Figure]time[Figure][process-ID][Figure]additional-information[Figure]

The following table provides the details about each item in the formats.

Table C-3 Format items common to the entries in the scheduler information logs

Item Description Length (bytes)
log-type A log type (for example, A001) is output. 4
date The date that the entry was output to the log.
The month and the day are delimited by either one or two one-byte space characters.
Examples:
- December 1: Dec[Figure]1 or Dec[Figure]01#
- December 10: Dec[Figure]10
If yes is specified in the AJSLOGOUTPUTYEAR or HOSTLOGOUTPUTYEAR environment setting parameter, the date is expressed in YYYY/MM/DD format.
Example:
December 7, 2009: 2009/12/07		 6 or 11
time The time that the entry was output to the log.
Hours, minutes, and seconds are delimited by one-byte colons (:). A single-digit is prefixed with 0.
Example:
Five minutes and 0 seconds after 11 p.m.: 23:05:00		 8
[process-ID] The process ID of a command or a scheduler service.
A process ID is included if PID is specified in the LOGHEADER or HOSTLOGHEADER environment setting parameter.
A process ID is not included if none is specified in the LOGHEADER or HOSTLOGHEADER environment setting parameter.
The value enclosed in square brackets is the process ID.		 0 or 3 to 12
additional-information Detailed log information. The limit on length varies according to the log entry.

#
Whether the month and the day are separated by one space or two spaces depends on the character string generated by the ctime() function of the OS.

Cautionary notes
  • Each entry in the scheduler information log consists of one record and the length of one record is 2,048 bytes (includes two bytes for a linefeed). Therefore, if the length of the log information exceeds 2,048 bytes, only 2,048 bytes are output. The 2,049th subsequent bytes are not output.
  • When you perform an operation in JP1/AJS3 - View, multiple entries in the scheduler information log might be created for that one operation. For example, if you create a unit, the DEFINE (C304) and CHANGE (C301) log entries are output.
  • If you perform the operations described below in JP1/AJS3 - View, the CHANGE (C301) log entry is output.
    In this case, the difference between the previous definition and the new definition is not output to the log, and only spaces ([Figure]) are output.
    - You define a job by using a program other than JP1/AJS3 - View, you open the job in the Define Details dialog box, but change no settings, and then you click the OK button.
    - You open the Schedule Settings dialog box for a jobnet, but change no settings, and then you click the OK button.

(2) Formats of the Scheduler Service Started log entry

The following are the formats of the Scheduler Service Started log entry.

When no process ID is to be included in the log information:
A001[Figure]date[Figure]time[Figure]KAVS0200-I[Figure]scheduler-service-name

When a process ID is to be included in the log information:
A001[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0200-I[Figure]scheduler-service-name

Example of a log entry:
A001 Dec 15 10:40:43 KAVS0200-I AJSROOT1

The following table describes the item that is specific to these formats.

Table C-4 Item specific to the Scheduler Service Started log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30

(3) Formats of the Scheduler Service Terminated log entry

The following are the formats of the Scheduler Service Terminated log entry.

When no process ID is to be included in the log information:
A002[Figure]date[Figure]time[Figure]KAVS0201-I[Figure]scheduler-service-name

When a process ID is to be included in the log information:
A002[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0201-I[Figure]scheduler-service-name

Example of a log entry:
A002 Dec 12 09:14:22 KAVS0201-I AJSROOT1

The following table describes the item that is specific to these formats.

Table C-5 Item specific to the Scheduler Service Terminated log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30

(4) Formats of the Scheduler Service Process Terminated Abnormally log entry

The following are the formats of the Scheduler Service Process Terminated Abnormally log entry.

When no process ID is to be included in the log information:
A003[Figure]date[Figure]time[Figure]KAVS0204-E[Figure]scheduler-service-name[Figure]process-name[Figure]end-code

When a process ID is to be included in the log information:
A003[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0204-E[Figure]scheduler-service-name[Figure]process-name[Figure]end-code

Example of a log entry:
A003 Dec 12 09:14:22 KAVS0204-E AJSROOT1 ajsschd 4

The following table describes the items that are specific to these formats.

Table C-6 Items specific to the Scheduler Service Process Terminated Abnormally log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
process-name One of the following is output:
- ajsflowd
- ajsschd
- ajslogd		 1 to 30
end-code An end code is recorded. 1 to 10

(5) Formats of the JP1/AJS3 - View Connection log entry

The following are the formats of a JP1/AJS3 - View Connection log entry.

When no process ID is to be included in the log information:
A007[Figure]date[Figure]time[Figure]KAVS0534-I[Figure]host-name[Figure];CONNECT[Figure]user-name[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification][Figure]scheduler-service-name

When a process ID is to be included in the log information:
A007[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0534-I[Figure]host-name[Figure];CONNECT[Figure]user-name[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification][Figure]scheduler-service-name

Logging conditions:
A log entry is output only if all is specified in the MONLOG environment setting parameter. Logging begins when:
  • You log in to JP1/AJS3 - Manager from JP1/AJS3 - View.
  • You select a scheduler service in the tree area in a JP1/AJS3 - View window.
  • JP1/AJS3 - View is automatically reconnected to JP1/AJS3 - Manager.

Example of a log entry:
A007 Aug 05 17:14:01 KAVS0534-I hostA ;CONNECT jp1admin [ADMIN] [10.210.38.11,JP1/AJS2-View] AJSROOT1

The following table describes the items that are specific to these formats.

Table C-7 Items specific to the JP1/AJS3 - View Connection log entry (scheduler information log)

Item Description Length (bytes)
host-name The host name of the host that was connected is output. 1 to 255
user-name The name of the JP1 user who performed the operation is output. 0 to 20
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host requested to perform the operation is output. 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. (JP1/AJS2-View) 13
scheduler-service-name The name of the scheduler service connected from JP1/AJS3-View is output. 1 to 30

(6) Formats of the JP1/AJS3 - View Disconnection log entry

The following are the formats of the JP1/AJS3 - View Disconnection log entry.

When no process ID is to be included in the log information:
A008[Figure]date[Figure]time[Figure]KAVS0535-I[Figure]host-name[Figure];DISCONNECT[Figure]user-name[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification][Figure]scheduler-service-name

When a process ID is to be included in the log information:
A008[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0535-I[Figure]host-name[Figure];DISCONNECT[Figure]user-name[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification][Figure]scheduler-service-name

Logging conditions:
A log entry is output only if all is specified in the MONLOG environment setting parameter. Logging begins when:
  • You exit JP1/AJS3 - View (log out from JP1/AJS3 - Manager).
  • You are unable to connect from JP1/AJS3 - View and the ajsmonsvr process terminates.
  • The length of time specified in the SESSIONTIMEOUT environment setting parameter has passed since communication with JP1/AJS3 - View was disconnected.

Example of a log entry:
A008 Dec 15 17:14:01 jp1admin KAVS0535-I hostA ;DISCONNECT [ADMIN] [10.210.38.11,JP1/AJS2-View] AJSROOT1

The following table describes the items that are specific to these formats.

Table C-8 Items specific to the JP1/AJS3 - View Disconnection log entry (scheduler information log)

Item Description Length (bytes)
host-name The host name of the host that was disconnected is output. 1 to 255
user-name The name of the JP1 user who performed the operation is output. 0 to 20
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The information for identifying the source requesting the operation is output. 7 to 15
requesting-source-identification The name of the product used to perform the operation is output (JP1/AJS2-View). 13
scheduler-service-name The name of the scheduler service that was disconnected is output. 1 to 30

(7) Formats of the Scheduler Information Logging Started log entry

The following are the formats of the Scheduler Information Logging Started log entry.

When no process ID is to be included in the log information:
A011[Figure]date[Figure]time[Figure]KAVS0220-I

When a process ID is to be included in the log information:
A011[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0220-I

Logging conditions:
An entry is output to the log only if all is specified in the LOGDLOG and HLOGDLOG environment setting parameter.

Example of a log entry:
A011 Dec 15 10:51:18 KAVS0220-I

(8) Formats of the Scheduler Information Logging Terminated log entry

The following are the formats of the Scheduler Information Logging Terminated log entry.

When no process ID is to be included in the log information:
A012[Figure]date[Figure]time[Figure]KAVS0221-I

When a process ID is to be included in the log information:
A012[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0221-I

Logging conditions:
An entry is output to the log only if all is specified in the LOGDLOG and HLOGDLOG environment setting parameter.

Example of a log entry:
A012 Dec 15 10:51:18 KAVS0221-I

(9) Formats of the Authentication (Login or User Mapping) Denied log entry

The following are the formats of the Authentication (Login or User Mapping) Denied log entry.

When no process ID is to be included in the log information:
A013[Figure]date[Figure]time[Figure]KAVS1009-W[Figure]requesting-host-IP-address[Figure]user-name[Figure]host-name

When a process ID is to be included in the log information:
A013[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS1009-W[Figure]requesting-host-IP-address[Figure]user-name[Figure]host-name

Logging conditions:
An entry is output to the log only if all is specified in the AUTHLOG environment setting parameter. Logging begins when an attempt is made to connect from one of the following clients, but user authentication or user mapping in JP1/Base fails:
  • JP1/AJS3 - View
  • JP1/AJS3 - Definition Assistant
  • JP1/AJS3 - Manager (when a command is executed remotely or a remote jobnet is executed)

Example of a log entry:
A013 Dec 15 17:14:01 KAVS1009-W 10.210.38.11 jp1admin hostA

The following table describes the items that are specific to these formats.

Table C-9 Items specific to an Authentication (Login or User Mapping) Denied log entry (scheduler information log)

Item Description Length (bytes)
requesting-host-IP-address The IP address of the host used to perform the operation is output. 7 to 15
user-name The name of the JP1 user who performed the operation is output. 0 to 20
host-name The host name of the host that accepted the request is output. 1 to 255

(10) Formats of the Jobnet Started log entry

The following are the formats of the Jobnet Started log entry.

When no process ID is to be included in the log information:
N001[Figure]date[Figure]time[Figure]KAVS0260-I[Figure]scheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:
N001[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0260-I[Figure]scheduler-service-name:jobnet-name:execution-ID #

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
N001 Dec 15 17:14:01 KAVS0260-I AJSROOT1:/group/net1:@A100

The following table describes the items that are specific to these formats.

Table C-10 Items specific to a Jobnet Started log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
jobnet-name The name of the jobnet or jobnet connector that started is output. 1 to 930
execution-ID The execution ID of the jobnet or jobnet connector that started is output in @alphanumeric-character format. 1 to 10

(11) Formats of the Jobnet Ended Normally log entry

The following are the formats of the Jobnet Ended Normally log entry.

When no process ID is to be included in the log information:
N002[Figure]date[Figure]time[Figure]KAVS0261-I[Figure]scheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:
N002[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0261-I[Figure]scheduler-service-name:jobnet-name:execution-ID#

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
N002 Dec 15 17:14:44 KAVS0261-I AJSROOT1:/group/net1:@A100

The following table describes the items that are specific to these formats.

Table C-11 Items specific to the Jobnet Ended Normally log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
jobnet-name The name of the jobnet or jobnet connector that ended is output. 1 to 930
execution-ID The execution ID of the jobnet or jobnet connector that ended is output in @alphanumeric-character format. 1 to 10

(12) Formats of the Jobnet Ended Abnormally log entry

The following are the formats of the Jobnet Ended Abnormally log entry.

When no process ID is to be included in the log information:
N003[Figure]date[Figure]time[Figure]KAVS0262-E[Figure]scheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:
N003[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0262-E[Figure]scheduler-service-name:jobnet-name:execution-ID #

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
N003 Dec 01 14:05:46 KAVS0262-E AJSROOT1:/net1/nestnet1:@A111

The following table describes the items that are specific to these formats.

Table C-12 Items specific to the Jobnet Ended Abnormally log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
jobnet-name The name of the jobnet or jobnet connector that ended abnormally is output. 1 to 930
execution-ID The execution ID of the jobnet or jobnet connector that ended abnormally is output in @alphanumeric-character format. 1 to 10

(13) Formats of the Jobnet Ended with Warning log entry

The following are the formats of the Jobnet Ended with Warning log entry.

When no process ID is to be included in the log information:
N004[Figure]date[Figure]time[Figure]KAVS0268-W[Figure]scheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:
N004[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0268-W[Figure]scheduler-service-name:jobnet-name:execution-ID#

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
N004 Dec 01 14:05:46 KAVS0268-W AJSROOT1:/net1/nestnet1:@A111

The following table describes the items that are specific to these formats.

Table C-13 Items specific to the Jobnet Ended with Warning log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
jobnet-name The name of the jobnet or jobnet connector that ended with a warning is output. 1 to 930
execution-ID The execution ID of the jobnet or jobnet connector that ended with a warning is output in @alphanumeric-character format. 1 to 10

(14) Formats of the Jobnet on Hold log entry

The following are the formats of the Jobnet on Hold log entry.

When no process ID is to be included in the log information:
N005[Figure]date[Figure]time[Figure]KAVS0270-I[Figure]scheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:
N005[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0270-I[Figure]scheduler-service-name:jobnet-name:execution-ID#

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
N005 Dec 01 14:05:46 KAVS0270-I AJSROOT1:/net1/nestnet1:@A111

The following table describes the items that are specific to these formats.

Table C-14 Items specific to the Jobnet on Hold log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
jobnet-name The name of the jobnet on hold is output. 1 to 930
execution-ID The execution ID of the jobnet on hold is output in @alphanumeric-character format. 1 to 10

(15) Formats of the Jobnet Shut Down log entry (N006)

The following are the formats of the Jobnet Shut Down log entry (N006).

When no process ID is to be included in the log information:
N006[Figure]date[Figure]time[Figure]KAVS0272-E[Figure]scheduler-service-name:jobnet-name:execution-ID#[Figure]maintenance-information

When a process ID is to be included in the log information:
N006[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0272-E[Figure]scheduler-service-name:jobnet-name:execution-ID#[Figure]maintenance-information

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
N006 Dec 15 09:31:39 KAVS0272-E AJSROOT1:/net1:@A100 082b4be5

The following table describes the items that are specific to these formats.

Table C-15 Items specific to the Jobnet Shut Down log entry (N006) (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
jobnet-name The name of the shut-down jobnet is output. 1 to 930
execution-ID The execution ID of the shut-down jobnet is output in @alphanumeric-character format. 1 to 10
maintenance-information Maintenance information is output. 8

(16) Formats of the Jobnet Shut Down log entry (N007)

The following are the formats of the Jobnet Shut Down log entry (N007).

When no process ID is to be included in the log information:
N007[Figure]date[Figure]time[Figure]KAVS0273-E[Figure]scheduler-service-name:jobnet-name:execution-ID#[Figure]maintenance-information

When a process ID is to be included in the log information:
N007[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0273-E[Figure]scheduler-service-name:jobnet-name:execution-ID#[Figure]maintenance-information

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
N007 Dec 15 09:31:39 KAVS0273-E AJSROOT1:/net1:@A100 082b4be5

The following table describes the items that are specific to these formats.

Table C-16 Items specific to the Jobnet Shut Down log entry (N007) (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
jobnet-name The name of the shut-down jobnet is output. 1 to 930
execution-ID The execution ID of the shut-down jobnet is output in @alphanumeric-character format. 1 to 10
maintenance-information Maintenance information is output. 8

(17) Formats of the Jobnet Start Delayed log entry

The following are the formats of the Jobnet Start Delayed log entry.

When no process ID is to be included in the log information:
N008[Figure]date[Figure]time[Figure]KAVS0275-I[Figure]scheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:
N008[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0275-I[Figure]scheduler-service-name:jobnet-name:execution-ID#

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
N008 Dec 01 16:36:37 KAVS0275-I AJSROOT1:/group/net1:@A106

The following table describes the items that are specific to these formats.

Table C-17 Items specific to the Jobnet Start Delayed log entry(scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
jobnet-name The name of the jobnet whose startup was delayed is output. 1 to 930
execution-ID The execution ID of the jobnet whose startup was delayed is output in @alphanumeric-character format. 1 to 10

(18) Formats of the Jobnet End Delayed log entry

The following are the formats of the Jobnet End Delayed log entry.

When no process ID is to be included in the log information:
N009[Figure]date[Figure]time[Figure]KAVS0276-I[Figure]scheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:
N009[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0276-I[Figure]scheduler-service-name:jobnet-name:execution-ID#

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
N009 Dec 01 16:36:37 KAVS0276-I AJSROOT1:/group/net1:@A106

The following table describes the items that are specific to these formats.

Table C-18 Items specific to the Jobnet End Delayed log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
jobnet-name The name of the jobnet whose end was delayed is output. 1 to 930
execution-ID The execution ID of the jobnet whose end was delayed is output in @alphanumeric-character format. 1 to 10

(19) Formats of the Next Schedule Queuing log entry

The following are the formats of the Next Schedule Queuing log entry.

When no process ID is to be included in the log information:
N010[Figure]date[Figure]time[Figure]KAVS0277-I[Figure]scheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:
N010[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0277-I[Figure]scheduler-service-name:jobnet-name:execution-ID#

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
N010 Dec 01 16:39:37 KAVS0277-I AJSROOT1:/group/net1:@A108

The following table describes the items that are specific to these formats.

Table C-19 Items specific to the Next Schedule Queuing log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
jobnet-name The applicable jobnet name is output. 1 to 930
execution-ID The applicable execution ID is output in @alphanumeric-character format. 1 to 10

(20) Formats of the Jobnet Start Condition Monitoring Started log entry

The following are the formats of the Jobnet Start Condition Monitoring Started log entry.

When no process ID is to be included in the log information:
N011[Figure]date[Figure]time[Figure]KAVS0240-I[Figure]scheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:
N011[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0240-I[Figure]scheduler-service-name:jobnet-name:execution-ID#

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
N011 Dec 15 10:43:09 KAVS0240-I AJSROOT1:/group/net1:@A101

The following table describes the items that are specific to these formats.

Table C-20 Items specific to the Jobnet Start Condition Monitoring Started log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
jobnet-name The name of the jobnet for which start condition monitoring started is output. 1 to 930
execution-ID The execution ID of the jobnet for which start condition monitoring started is output in @alphanumeric-character format. 1 to 10

(21) Formats of the Jobnet Start Condition Monitoring Terminated log entry

The following are the formats of the Jobnet Start Condition Monitoring Terminated log entry.

When no process ID is to be included in the log information:
N012[Figure]date[Figure]time[Figure]KAVS0241-I[Figure]scheduler-service-name:jobnet-name:execution-ID#[Figure]end-status

When a process ID is to be included in the log information:
N012[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0241-I[Figure]scheduler-service-name:jobnet-name:execution-ID#[Figure]end-status

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
N012 Dec 01 16:36:38 KAVS0241-I AJSROOT1:/group/net1:@A101 u

The following table describes the items that are specific to these formats.

Table C-21 Items specific to the Jobnet Start Condition Monitoring Terminated log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
jobnet-name The name of the jobnet for which start condition monitoring terminated is output. 1 to 930
execution-ID The execution ID of the jobnet for which start condition monitoring terminated is output in @alphanumeric-character format. 1 to 10
end-status One of the following is output:
u: Unmonitored + Ended
c: Monitor terminated
i: Interrupted monitoring
n: Monitor-end normal		 1

(22) Formats of the Jobnet Skipped So Not Executed log entry

The following are the formats of the Jobnet Skipped So Not Executed log entry.

When no process ID is to be included in the log information:
N013[Figure]date[Figure]time[Figure]KAVS0279-E[Figure]scheduler-service-name:jobnet-name:execution-ID#

When a process ID is to be included in the log information:
N013[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0279-E[Figure]scheduler-service-name:jobnet-name:execution-ID#

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
N013 Dec 01 16:36:38 KAVS0279-E AJSROOT1:/group/net1:@A101

The following table describes the items that are specific to these formats.

Table C-22 Items specific to the Jobnet Skipped So Not Executed log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
jobnet-name The name of root jobnet name of the jobnet whose status became Skipped so not exe. is output. 1 to 930
execution-ID The execution ID of the jobnet whose status became Skipped so not exe. is output in @alphanumeric-character format. 1 to 10

(23) Formats of the All Jobnet Registrations Canceled log entry

The following are the formats of the All Jobnet Registrations Canceled log entry.

When no process ID is to be included in the log information:
N014[Figure]date[Figure]time[Figure]KAVS0267-I[Figure]scheduler-service-name

When a process ID is to be included in the log information:
N014[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0267-I[Figure]scheduler-service-name

Example of a log entry:
N014 Dec 01 16:36:38 KAVS0267-I AJSROOT1

The following table describes the item that is specific to these formats.

Table C-23 Item specific to the All Jobnet Registrations Canceled log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30

(24) Formats of the Start Condition Monitoring Waiting to Terminate log entry

The following are the formats of the Start Condition Monitoring Waiting to Terminate log entry.

When no process ID is to be included in the log information:
N015[Figure]date[Figure]time[Figure]KAVS1420-I[Figure]scheduler-service-name:jobnet-name:execution-ID-of-new-generation[Figure]execution-ID-of-previous-generation

When a process ID is to be included in the log information:
N015[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS1420-I[Figure]scheduler-service-name:jobnet-name:execution-ID-of-new-generation[Figure]execution-ID-of-previous-generation

Example of a log entry:
N015 Dec 15 14:48:54 KAVS1420-I AJSROOT1:/group/net1:@A109 @A108

The following table describes the items that are specific to these formats.

Table C-24 Items specific to the Start Condition Monitoring Waiting to Terminate log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
jobnet-name The applicable jobnet name is output. 1 to 930
execution-ID-of-new-generation The execution ID of the new generation is output in @alphanumeric-character format. 1 to 10
execution-ID-of-previous-generation The execution ID of the previous generation is output in @alphanumeric-character format. 1 to 10

(25) Formats of the Job Started log entry

The following are the formats of the Job Started log entry.

When no process ID is to be included in the log information:
J001[Figure]date[Figure]time[Figure]KAVS0263-I[Figure]scheduler-service-name:job-name:execution-ID#[Figure]execution-host-name#[Figure]job-number#

When a process ID is to be included in the log information:
J001[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0263-I[Figure]scheduler-service-name:job-name:execution-ID#[Figure]execution-host-name #[Figure]job-number #

#
:execution-ID[Figure]execution-host-name [Figure]job-number is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
J001 Dec 15 17:14:07 KAVS0263-I AJSROOT1:/group/net1/job1:@A100 hostA 1

The following table describes the items that are specific to these formats.

Table C-25 Items specific to the Job Started log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
job-name The name of the job that started is output. 1 to 930
execution-ID The execution ID of the job that started is output in @alphanumeric-character format. 1 to 10
execution-host-name The name of the execution host of the job that started is output. 1 to 255
job-number The job number of the job that started is output as a decimal number.
If JP1/NQSEXEC is linked, and the machine ID specified by JP1/NQSEXEC is a value other than 0, the job number is output in mmmm0nnnnn format (mmmm is the machine ID and nnnnn is the job number).		 1 to 10

(26) Formats of the Job Ended Normally log entry

The following are the formats of the Job Ended Normally log entry.

When no process ID is to be included in the log information:
J002[Figure]date[Figure]time[Figure]KAVS0264-I[Figure]scheduler-service-name:job-name:execution-ID#[Figure]execution-host-name#[Figure]return-value #[Figure]job-number#

When a process ID is to be included in the log information:
J002[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0264-I[Figure]scheduler-service-name:job-name:execution-ID#[Figure]execution-host-name #[Figure]return-value#[Figure]job-number #

#
:execution-ID[Figure]execution-host-name [Figure]return-value[Figure]job-number is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
J002 Dec 15 17:14:44 KAVS0264-I AJSROOT1:/group/net1/job1:@A100 hostA 0 1

The following table describes the items that are specific to these formats.

Table C-26 Items specific to the Job Ended Normally log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
job-name The name of the job that ended is output. 1 to 930
execution-ID The execution ID of the job that ended is output in @alphanumeric-character format. 1 to 10
execution-host-name The name of the execution host of the job that ended is output. 1 to 255
return-value The return value of the job that ended is output as a decimal number. 1 to 10
job-number The job number of the job that ended is output as a decimal number.
If JP1/NQSEXEC is linked, and the machine ID specified by JP1/NQSEXEC is a value other than 0, the job number is output in mmmm0nnnnn format (mmmm is a machine ID and nnnnn is a job number).		 1 to 10

(27) Formats of the Job Ended Abnormally log entry

The following are the formats of the Job Ended Abnormally log entry.

When no process ID is to be included in the log information:
J003[Figure]date[Figure]time[Figure]KAVS0265-E[Figure]scheduler-service-name:job-name:execution-ID#[Figure]end-status[Figure]return-value[Figure]execution-host-name#[Figure]job-number#

When a process ID is to be included in the log information:
J003[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0265-E[Figure]scheduler-service-name:job-name:execution-ID#[Figure]end-status[Figure]return-value[Figure]execution-host-name #[Figure]job-number #

#
:execution-ID and [Figure]execution-host-name [Figure]job-number are output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
J003 Dec 01 14:05:45 KAVS0265-E AJSROOT1:/net1/nestnet1/job1:@A111 a 99 hostA 5

The following table describes the items that are specific to these formats.

Table C-27 Items specific to the Job Ended Abnormally log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
job-name The name of the job that ended abnormally is output. 1 to 930
execution-ID The execution ID of the job that ended abnormally is output in @alphanumeric-character format. 1 to 10
end-status One of the following is output:
- a: Ended abnormally
- f: Failed to start
- c: Killed
- ?: Unknown end status		 1
return-value The return value of the job that ended abnormally is output as a decimal number. 1 to 10
execution-host-name The name of the execution host of the job that ended abnormally is output. 1 to 255
job-number The job number of the job that ended abnormally is output as a decimal number.
If JP1/NQSEXEC is linked, and the machine ID specified by JP1/NQSEXEC is a value other than 0, the job number is output in mmmm0nnnnn format (mmmm is a machine ID and nnnnn is a job number).
If the job could not be started because submission of the job failed, the job number is blank.		 1 to 10

(28) Formats of the Job Ended with Warning log entry

The following are the formats of the Job Ended with Warning log entry.

When no process ID is to be included in the log information:
J004[Figure]date[Figure]time[Figure]KAVS0269-W[Figure]scheduler-service-name:job-name:execution-ID#[Figure]return-value[Figure]execution-host-name#[Figure]job-number#

When a process ID is to be included in the log information:
J004[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0269-W[Figure]scheduler-service-name:job-name:execution-ID#[Figure]return-value[Figure]execution-host-name #[Figure]job-number #

#
:execution-ID and [Figure]execution-host-name [Figure]job-number are output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
J004 Dec 01 14:05:45 KAVS0269-W AJSROOT1:/net1/nestnet1/job1:@A111 99 hostA 5

The following table describes the items that are specific to these formats.

Table C-28 Items specific to the Job Ended with Warning log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
job-name The name of the job that ended with a warning is output. 1 to 930
execution-ID The execution ID of the job that ended with a warning is output in @alphanumeric-character format. 1 to 10
return-value The return value of the job that ended with a warning is output as a decimal number. 1 to 10
execution-host-name The name of the execution host of the job that ended with a warning is output. 1 to 255
job-number The job number of the job that ended with a warning is output as a decimal number.
If JP1/NQSEXEC is linked, and the machine ID specified by JP1/NQSEXEC is a value other than 0, the job number is output in mmmm0nnnnn format (mmmm is a machine ID and nnnnn is a job number).		 1 to 10

(29) Formats of the Job on Hold log entry

The following are the formats of the Job on Hold log entry.

When no process ID is to be included in the log information:
J005[Figure]date[Figure]time[Figure]KAVS0271-I[Figure]scheduler-service-name:job-name:execution-ID#

When a process ID is to be included in the log information:
J005[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0271-I[Figure]scheduler-service-name:job-name:execution-ID#

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
J005 Dec 01 14:05:45 KAVS0271-I AJSROOT1:/net1/nestnet1/job1:@A111

The following table describes the items that are specific to these formats.

Table C-29 Items specific to the Job on Hold log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
job-name The name of the job on hold is output. 1 to 930
execution-ID The execution ID of the job on hold is output in @alphanumeric-character format. 1 to 10

(30) Formats of the Job Submission Started log entry

The following are the formats of the Job Submission Started log entry.

When no process ID is to be included in the log information:
J006[Figure]date[Figure]time[Figure]KAVS0278-I[Figure]scheduler-service-name:job-name:execution-ID#

When a process ID is to be included in the log information:
J006[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0278-I[Figure]scheduler-service-name:job-name:execution-ID#

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
J006 Dec 15 17:14:01 KAVS0278-I AJSROOT1:/group/net1/job1:@A100

The following table describes the items that are specific to these formats.

Table C-30 Items specific to the Job Submission Started log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
job-name The name of the submitted job is output. 1 to 930
execution-ID The execution ID of the submitted job is output in @alphanumeric-character format. 1 to 10

(31) Formats of the Event Job Execution Request Started log entry

The following are the formats of the Event Job Execution Request Started log entry.

When no process ID is to be included in the log information:
J007[Figure]date[Figure]time[Figure]KAVS0242-I[Figure]scheduler-service-name:event-job-name:execution-ID#

When a process ID is to be included in the log information:
J007[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0242-I[Figure]scheduler-service-name: event-job-name:execution-ID#

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
J007 Dec 15 17:14:01 KAVS0242-I AJSROOT1:/group/net1/evjob1:@A100

The following table describes the items that are specific to these formats.

Table C-31 Items specific to the Event Job Execution Request Started log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
event-job-name The applicable event job name is output. 1 to 930
execution-ID The execution ID of the event job is output in @alphanumeric-character format. 1 to 10

(32) Formats of the Job End Delayed log entry

The following are the formats of the Job End Delayed log entry.

When no process ID is to be included in the log information:
J008[Figure]date[Figure]time[Figure]KAVS0248-I[Figure]scheduler-service-name:job-name:execution-ID#

When a process ID is to be included in the log information:
J008[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0248-I[Figure]scheduler-service-name: job-name:execution-ID#

#
:execution-ID is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
J008 Dec 01 16:36:37 KAVS0248-I AJSROOT1:/group/net1/job1:@A106

The following table describes the items that are specific to these formats.

Table C-32 Items specific to the Job End Delayed log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
job-name The name of the job whose end was delayed is output. 1 to 930
execution-ID The execution ID of the job whose end was delayed is output in @alphanumeric-character format. 1 to 10

(33) Formats of the Job Queuing Canceled log entry

The following are the formats of the Job Queuing Canceled log entry.

When no process ID is to be included in the log information:
J009[Figure]date[Figure]time[Figure]KAVS0266-I[Figure]scheduler-service-name:job-name:execution-ID#[Figure]job-number#

When a process ID is to be included in the log information:
J009[Figure]date[Figure]time[Figure][process-ID][Figure]KAVS0266-I[Figure]scheduler-service-name:job-name:execution-ID#[Figure]job-number #

#
:execution-ID[Figure]job-number is output if yes is specified in the LOGINFOALL environment setting parameter.

Example of a log entry:
J009 Dec 01 16:36:37 KAVS0266-I AJSROOT1:/group/net1/job1:@A100 1

The following table describes the items that are specific to these formats.

Table C-33 Items specific to the Job Queuing Canceled log entry (scheduler information log)

Item Description Length (bytes)
scheduler-service-name The applicable scheduler service name is output. 1 to 30
job-name The name of the job that ended is output. 1 to 930
execution-ID The execution ID of the job that ended is output in @alphanumeric-character format. 1 to 10
job-number The job number of the job that ended is output as a decimal number. 1 to 10

(34) Formats of the Scheduler Service Operation Environment Temporarily Changed log entry

The following are the formats of the Scheduler Service Operation Environment Temporarily Changed log entry.

When no process ID is to be included in the log information:
C001[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];ALTER[Figure]option

When a process ID is to be included in the log information:
C001[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];ALTER[Figure]option

Logging conditions:
An entry is output to the log only if all or alter is specified in the OPELOG environment setting parameter.

Example of a log entry:
C001 Dec 15 09:51:41 jp1admin 0 JP1_DEFAULT ;ALTER -F AJSROOT1 -c COPY

The following table describes the items that are specific to these formats.

Table C-34 Items specific to the Scheduler Service Operation Environment Temporarily Changed log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsalter command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
option The options specified in the executed ajsalter command are output. 1 or more

(35) Formats of the Scheduler Service Stopped log entry

The following are the formats of the Scheduler Service Stopped log entry.

When no process ID is to be included in the log information:
C002[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];STOP[Figure]option

When a process ID is to be included in the log information:
C002[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];STOP[Figure]option

Logging conditions:
An entry is output to the log only if all or stop is specified in the OPELOG environment setting parameter.

Example of a log entry:
C002 Dec 15 09:53:08 jp1admin 0 JP1_DEFAULT ;STOP -F AJSROOT1 -w -c

The following table describes the items that are specific to these formats.

Table C-35 Items specific to the Scheduler Service Stopped log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsstop command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
option The options specified in the executed ajsstop command are output. 1 or more

(36) Formats of the Scheduler Service Started log entry

The following are the formats of the Scheduler Service Started log entry.

When no process ID is to be included in the log information:
C003[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];START[Figure]option

When a process ID is to be included in the log information:
C003[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];START[Figure]option

Logging conditions:
An entry is output to the log only if all or start is specified in the OPELOG environment setting parameter.

Example of a log entry:
C003 Dec 07 19:26:59 jp1admin 0 JP1_DEFAULT ;START -F AJSROOT1 -w -o

The following table describes the items that are specific to these formats.

Table C-36 Items specific to the Scheduler Service Started log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsstart command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
option The options specified in the executed ajsstart command are output. 1 to 500

(37) Formats of the Jobnet Registered log entry

The following are the formats of the Jobnet Registered log entry.

When no process ID is to be included in the log information:
C101[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];ENTRY[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C101[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];ENTRY[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or entry is specified in the OPELOG environment setting parameter.

Example of a log entry:
C101 Dec 15 10:51:18 jp1admin KAVS0681-E JP1_DEFAULT ;ENTRY -F AJSROOT1 -s /group/net1

The following table describes the items that are specific to these formats.

Table C-37 Items specific to the Jobnet Registered log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsentry command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajsentry command are output.
For 08-00 or earlier, the value of the -c option is output when detail is specified in MACLOG.
For 08-10 or later, the value of the -c option is output when yes is specified in AJSLOGOUTPUTEXTEND, regardless of the specification of MACLOG.		 1 to 500
unit-name The unit name specified in the executed ajsentry command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(38) Formats of the Registered Jobnet Canceled log entry

The following are the formats of the Registered Jobnet Canceled log entry.

When no process ID is to be included in the log information:
C102[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];LEAVE[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C102[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];LEAVE[Figure][user-type] #[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or leave is specified in the OPELOG environment setting parameter.

Example of a log entry:
C102 Dec 01 14:03:14 jp1admin 0 JP1_DEFAULT ;LEAVE -F AJSROOT1 -B all /net1

The following table describes the items that are specific to these formats.

Table C-38 Items specific to the Registered Jobnet Canceled log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsleave command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajsleave command are output. 1 to 500
unit-name The unit name specified in the executed ajsleave command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(39) Formats of the Jobnet Temporarily Changed log entry

The following are the formats of the Jobnet Temporarily Changed log entry.

When no process ID is to be included in the log information:
C103[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];PLAN[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C103[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];PLAN[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or plan is specified in the OPELOG environment setting parameter.

Example of a log entry:
C103 Dec 15 09:55:10 jp1admin 0 JP1_DEFAULT ;PLAN -F AJSROOT1 -r -X auto /net1

The following table describes the items that are specific to these formats.

Table C-39 Items specific to the Jobnet Temporarily Changed log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsplan command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajsplan command are output. 1 to 500
unit-name The unit name specified in the executed ajsplan command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(40) Formats of the Jobnet Execution Interrupted log entry

The following are the formats of the Jobnet Execution Interrupted log entry.

When no process ID is to be included in the log information:
C104[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];INTRPT[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C104[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];INTRPT[Figure][user-type] #[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or intrpt is specified in the OPELOG environment setting parameter.

Example of a log entry:
C104 Dec 15 09:56:36 jp1admin 0 JP1_DEFAULT ;INTRPT -F AJSROOT1 -X auto /net1

The following table describes the items that are specific to these formats.

Table C-40 Items specific to the Jobnet Execution Interrupted log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsintrpt command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajsintrpt command are output. 1 to 500
unit-name The unit name specified in the executed ajsintrpt command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(41) Formats of the Jobnet Rerun log entry

The following are the formats of the Jobnet Rerun log entry.

When no process ID is to be included in the log information:
C105[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RERUN[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C105[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RERUN[Figure][user-type] #[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or rerun is specified in the OPELOG environment setting parameter.

Example of a log entry:
C105 Dec 07 16:36:47 jp1admin KAVS0141-E JP1_DEFAULT ;RERUN -F AJSROOT1 -t -X no /group/net1:@A118

The following table describes the items that are specific to these formats.

Table C-41 Items specific to the Jobnet Rerun log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsrerun command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajsrerun command are output. 1 to 500
unit-name The unit name specified in the executed ajsrerun command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(42) Formats of the Jobnet Suspended/Released from Suspension log entry

The following are the formats of the Jobnet Suspended/Released from Suspension log entry.

When no process ID is to be included in the log information:
C106[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];SUSPEND[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C106[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];SUSPEND[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or suspend is specified in the OPELOG environment setting parameter.

Example of a log entry:
C106 Dec 07 16:36:14 jp1admin 0 JP1_DEFAULT ;SUSPEND -F AJSROOT1 -C -r /group/net1

The following table describes the items that are specific to these formats.

Table C-42 Items specific to the Jobnet Suspended/Released from Suspension log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajssuspend command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajssuspend command are output. 1 to 500
unit-name The unit name specified in the executed ajssuspend command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(43) Formats of the Jobnet Registration for Execution Information Imported log entry

The following are the formats of the Jobnet Registration for Execution Information Imported log entry.

When no process ID is to be included in the log information:
C107[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RGIMP[Figure][user-type]#[Figure]option

When a process ID is to be included in the log information:
C107[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RGIMP[Figure][user-type]#[Figure]option

#
[Figure][user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or rgimport is specified in the OPELOG environment setting parameter.

Example of a log entry:
C107 Dec 07 19:14:15 jp1admin KAVS0681-E JP1_DEFAULT ;RGIMP -F AJSROOT1 -i c:\temp\entry_info.txt

The following table describes the items that are specific to these formats.

Table C-43 Items specific to the Jobnet Registration for Execution Information Imported log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsrgimport command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
option# The options specified in the executed ajsrgimport command are output. 1 to 500

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(44) Formats of the Jobnet Registered by Import of Jobnet Registration for Execution Information log entry

The following are the formats of the Jobnet Registered by Import of Jobnet Registration for Execution Information log entry.

When no process ID is to be included in the log information:
C108[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RGIMP[Figure][user-type]#[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C108[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RGIMP[Figure][user-type]#[Figure]option[Figure]unit-name

#
[Figure][user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or rgimport is specified in the OPELOG environment setting parameter.

Example of a log entry:
C108 Dec 07 19:14:15 jp1admin KAVS4832-E JP1_DEFAULT ;RGIMP -F AJSROOT1 /group/net1

The following table describes the items that are specific to these formats.

Table C-44 Items specific to the Jobnet Registered by Import of Jobnet Registration for Execution Information log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsrgimport command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
option# The options that are output are the ones specified in the ajsrgimport command when the command was used to register the jobnet. 1 to 500
unit-name The root jobnet name that is output is name actually registered by using the ajsrgimport command. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(45) Formats of the Jobnet/Job Forcibly Ended log entry

The following are the formats of the Jobnet/Job Forcibly Ended log entry.

When no process ID is to be included in the log information:
C201[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];KILL[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C201[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];KILL[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or kill is specified in the OPELOG environment setting parameter.

Example of a log entry:
C201 Dec 07 19:14:15 jp1admin KAVS0129-E JP1_DEFAULT ;KILL -F AJSROOT1 -X no /group/net1:@A137

The following table describes the items that are specific to these formats.

Table C-45 Items specific to the Jobnet/Job Forcibly Ended log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajskill command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajskill command are output. 1 to 500
unit-name The unit name specified in the executed ajskill command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(46) Formats of the Job Status Changed log entry

The following are the formats of the Job Status Changed log entry.

When no process ID is to be included in the log information:
C202[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];CHGSTAT[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C202[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];CHGSTAT[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or chgst is specified in the OPELOG environment setting parameter.

Example of a log entry:
C202 Dec 15 09:58:13 jp1admin 0 JP1_DEFAULT ;CHGSTAT -F AJSROOT1 -t normal -X auto /net1/job

The following table describes the items that are specific to these formats.

Table C-46 Items specific to the Job Status Changed log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajschgstat command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajschgstat command are output. 1 to 500
unit-name The unit name specified in the executed ajschgstat command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(47) Formats of the Unit Definitions Changed log entry

The following are the formats of the Unit Definitions Changed log entry.

When no process ID is to be included in the log information:
C301[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];CHANGE[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification]#[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C301[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];CHANGE[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification]#[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification][Figure]option is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or change is specified in the OPELOG environment setting parameter.

Logging example for commands:

When Monthly Jobnet is specified as the comment and 10 is specified as the number of saved generations:
C301 Dec 07 13:59:30 jp1admin 0 JP1_DEFAULT ;CHANGE [ADMIN] [CHANGE] -F AJSROOT1 -C "Monthly Jobnet" -l "10" /net

Logging examples for JP1/AJS3 - View:

When c:\user\pgm.exe is specified as the execution file name and 1 is specified as the execution priority:
C301 Mar 05 13:59:30 jp1admin 0 JP1_DEFAULT ;CHANGE [ADMIN] [127.0.0.1, JP1/AJS2-View] [VIEW] pr=1; sc="c:\user\pgm.exe"; AJSROOT1:/net/job

When the execution file name is blank and None (default) is specified as the execution priority:
C301 Mar 05 13:59:30 jp1admin 0 JP1_DEFAULT ;CHANGE [ADMIN] [127.0.0.1, JP1/AJS2-View] [VIEW] pr=; sc=; AJSROOT1:/net/job

When schedule rule 1 is copied to create schedule rule 2:
C301 Dec 07 13:59:30 jp1admin 0 JP1_DEFAULT ; CHANGE [ADMIN] [127.0.0.1, JP1/AJS2-View] [VIEW] sd; st; cy; sh; shd; AJSROOT1:/net
For the parameters listed below, the difference between the new and previous definitions cannot be extracted because the number of parameters that can be specified and parameter lengths are variable. Accordingly, only the names of the applicable parameters are recorded in the log entry.
sd, st, sy, ey, ln, cy, sh, shd, wt, wc, cftd, el, ar, env, evwfr, jpoif, mladr, mlsbj, mltxt, mlatf, lftpd, lffnm, lfmks, hlsh, hleh
Note that if only the sequence of the parameters is changed (the definitions of the parameters do not change), the difference in the sequence is not output, although the Unit Definitions Changed log entry is still output to the file.

The following table describes the items that are specific to these formats.

Table C-47 Items specific to the Unit Definitions Changed log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajschange, ajschgjob, or ajschgnet command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajschange, ajschgnet, or ajschgjob command, or the changes made by a user from JP1/AJS3 - View are output.
For 08-00 or earlier, command options are not output.
For 08-10 or later, command options or the changes made by the user from JP1/AJS3 - View are output if yes is specified in AJSLOGOUTPUTEXTEND.
In option, the type of the definition change operation and then the options of the applicable command or the changes made by the user from JP1/AJS3 - View are output.
The definition change operation types are as follows:
  • For ajschange: CHANGE
  • For ajschgnet: CHGNET
  • For ajschgjob: CHGJOB
  • For JP1/AJS3 - View: VIEW
 1 to 510
unit-name The unit name specified in the executed ajschange, ajschgnet, or ajschgjob command, or the name of the unit for which operations were performed from JP1/AJS3 - View is output.
For the ajschange, ajschgnet, and ajschgjob commands, unit names do not include scheduler service names. However, if the target is a scheduler service, the indication in option is -f scheduler-service-name. For JP1/AJS3 - View, unit names include scheduler service names.		 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) or the value of the parameter to be changed (the part that is not the parameter name and the subsequent one-byte equal sign (=)) exceeds 64 bytes, only 64 bytes are output.
If the size of all options or parameters exceeds 510 bytes, only 510 bytes are output. Note that the 510-byte limit is exceeded before an option name or a parameter name is complete, that option or parameter is not output.

(48) Formats of the Unit Deleted log entry

The following are the formats of the Unit Deleted log entry.

When no process ID is to be included in the log information:
C302[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];DELETE[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C302[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];DELETE[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or delete is specified in the OPELOG environment setting parameter.

Example of a log entry:
C302 Dec 07 12:25:43 jp1admin 0 JP1_DEFAULT ;DELETE -F AJSROOT1 -S /group/net1

The following table describes the items that are specific to these formats.

Table C-48 Items specific to the Unit Deleted log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsdelete command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajsdelete command are output. 1 to 500
unit-name The unit name specified in the executed ajsdelete command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(49) Formats of the Unit Restored log entry

The following are the formats of the Unit Restored log entry.

When no process ID is to be included in the log information:
C303[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RESTORE[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C303[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RESTORE[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or restore is specified in the OPELOG environment setting parameter.

Example of a log entry:
C303 Dec 07 10:00:22 jp1admin 0 JP1_DEFAULT ;RESTORE -F AJSROOT1 -e -n box

The following table describes the items that are specific to these formats.

Table C-49 Items specific to the Unit Restored log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsrestore command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajsrestore command are output. 1 to 500

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(50) Formats of the Unit Created log entry

The following are the formats of the Unit Created log entry.

When no process ID is to be included in the log information:
C304[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];DEFINE[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C304[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];DEFINE[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or define is specified in the OPELOG environment setting parameter.

Example of a log entry:
C304 Dec 07 14:00:46 jp1admin 0 JP1_DEFAULT ;DEFINE -F AJSROOT1 /net1

The following table describes the items that are specific to these formats.

Table C-50 Items specific to the Unit Created log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsdefine command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajsdefine command are output only for an abnormal termination. 1 to 500
unit-name or definition file name The unit name or the definition file name specified in the executed ajsdefine command is output.
The unit name is output for a normal termination.
The definition file name is output for an abnormal termination.		 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(51) Formats of the Unit Copied or Moved log entry

The following are the formats of the Unit Copied or Moved log entry.

When no process ID is to be included in the log information:
C305[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];COPY[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C305[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];COPY[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or copy is specified in the OPELOG environment setting parameter.

Example of a log entry:
C305 Dec 15 11:21:57 jp1admin 0 JP1_DEFAULT ;COPY -F AJSROOT1 -c -o /group/net1/job11 /group/net1/job1

The following table describes the items that are specific to these formats.

Table C-51 Items specific to the Unit Copied or Moved log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajscopy command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajscopy command are output. 1 to 500
unit-name The unit name specified in the executed ajscopy command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(52) Formats of the Unit Imported log entry

The following are the formats of the Unit Imported log entry.

When no process ID is to be included in the log information:
C306[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];IMPORT[Figure][user-type]#[Figure]option

When a process ID is to be included in the log information:
C306[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];IMPORT[Figure][user-type]#[Figure]option

#
[Figure][user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or import is specified in the OPELOG environment setting parameter.

Example of a log entry:
C306 Dec 15 09:14:22 jp1admin 0 JP1_DEFAULT ;IMPORT -i c:\temp\file AJSROOT1:/group/net

The following table describes the items that are specific to these formats.

Table C-52 Items specific to the Unit Imported log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsimport command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
option# The options specified in the executed ajsimport command are output. 1 to 500

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(53) Formats of the Jobnet Released log entry

The following are the formats of the Jobnet Released log entry.

When no process ID is to be included in the log information:
C307[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RELEASEOPE[Figure][user-type]#[Figure]option

When a process ID is to be included in the log information:
C307[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RELEASEOPE[Figure][user-type]#[Figure]option

#
[Figure][user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or release is specified in the OPELOG environment setting parameter.

Example of a log entry:
C307 Dec 15 13:28:49 jp1admin 0 JP1_DEFAULT ;RELEASEOPE -F AJSROOT1 -a /Production Environment/unit001 -rid 001 -rcm 2009/12/07 Release Definition -rdy 2009/12/07 -rti 20:00 -ru /Test Environment/Rel001

The following table describes the items that are specific to these formats.

Table C-53 Items specific to the Jobnet Released log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsrelease command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
option# The options specified in the executed ajsrelease command are output. 1 to 500

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(54) Formats of the Calendar Changed log entry

The following are the formats of the Calendar Changed log entry.

When no process ID is to be included in the log information:
C401[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];CALENDAR[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C401[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];CALENDAR[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
  • An entry is output to the log only if all or calendar is specified in the OPELOG environment setting parameter.
  • If you used JP1/AJS3 - View to change a calendar when yes was specified in the AJSLOGOUTPUTEXTEND environment setting parameter, the changes are not output in the Command Processing Started log entry corresponding to the Calendar Changed log entry.

Example of a log entry:
C401 Dec 15 10:49:45 jp1admin 0 JP1_DEFAULT ;CALENDAR -F AJSROOT1 mo we /

The following table describes the items that are specific to these formats.

Table C-54 Items specific to the Calendar Changed log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajscalendar command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajscalendar command or the changes made by the user from JP1/AJS3 - View are output.
If no is specified in the AJSLOGOUTPUTEXTEND environment setting parameter, one of the following values is output for option to indicate the type of change:
  • When a calendar is changed: mo
  • When a standard week value is changed: we
  • When a base date is changed: sd
  • When a base time is changed: st
If yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter, the options specified in the executed ajscalendar command or the name of the definition parameter changed by the user from JP1/AJS3 - View is output for option.
The name of the definition parameter to be output is as follows when JP1/AJS3 - View is used to change the parameter:
  • When an open day is added or deleted: op
  • When a closed day is added or deleted: cl
  • When a base date is changed: sdd
  • When a base month for the calendar is changed: md
  • When a base time is changed: stt
 1 to 500
unit-name The unit name specified in the executed ajscalendar command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(55) Formats of the Unit Status Displayed log entry

The following are the formats of the Unit Status Displayed log entry.

When no process ID is to be included in the log information:
C502[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];SHOW[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C502[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];SHOW[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or show is specified in the REFLOG environment setting parameter.

Example of a log entry:
C502 Dec 07 09:14:22 jp1admin 0 JP1_DEFAULT ;SHOW -F AJSROOT1 -l -g 1 -X auto /group/*

The following table describes the items that are specific to these formats.

Table C-55 Items specific to the Unit Status Displayed log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsshow command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID Always 0. 1
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajsshow command are output. Note that the value specified for the -f, -t, or -i option is always enclosed in double quotation marks (""). 1 to 500
unit-name The unit name specified in the executed ajsshow command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(56) Formats of the Unit Definitions Output log entry

The following are the formats of the Unit Definitions Output log entry.

When no process ID is to be included in the log information:
C503[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];PRINT[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C503[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];PRINT[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or print is specified in the REFLOG environment setting parameter.

Example of a log entry:
C503 Dec 07 09:14:22 jp1admin 0 JP1_DEFAULT ;PRINT -F AJSROOT1 -a /group/*

The following table describes the items that are specific to these formats.

Table C-56 Items specific to the Unit Definitions Output log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsprint command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID Always 0. 1
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajsprint command are output. Note that the value specified for the -f or -t option is always enclosed in double quotation marks (""). 1 to 500
unit-name The unit name specified in the executed ajsprint command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(57) Formats of the Unit Definitions Backed Up log entry

The following are the formats of the Unit Definitions Backed Up log entry.

When no process ID is to be included in the log information:
C504[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];BACKUP[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C504[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];BACKUP[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or backup is specified in the REFLOG environment setting parameter.

Example of a log entry:
C504 Dec 07 09:14:22 jp1admin 0 JP1_DEFAULT ;BACKUP -F AJSROOT1 -b c:\tmp\backup -e -a -n BOX /group

The following table describes the items that are specific to these formats.

Table C-57 Items specific to the Unit Definitions Backed Up log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsbackup command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID Always 0. 1
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the executed ajsbackup command are output. 1 to 500
unit-name The unit name specified in the executed ajsbackup command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(58) Formats of the Root Jobnet Schedule Information Output log entry

The following are the formats of the Root Jobnet Schedule Information Output log entry.

When no process ID is to be included in the log information:
C506[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];SCHEDULE[Figure][user-type]#[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C506[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];SCHEDULE[Figure][user-type]#[Figure]option[Figure]unit-name

#
[Figure][user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or schedule is specified in the REFLOG environment setting parameter.

Example of a log entry:
C506 Dec 07 09:14:22 jp1admin 0 JP1_DEFAULT ;SCHEDULE -F AJSROOT1 -b 2009/12/8 -e 2009/12/8 /group/net

The following table describes the items that are specific to these formats.

Table C-58 Items specific to the Root Jobnet Schedule Information Output log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsschedule command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 to 5
option# The options specified in the executed ajsschedule command are output. 1 to 500
unit-name The root jobnet name specified in the executed ajsschedule command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(59) Formats of the Unit Name Output log entry

The following are the formats of the Unit Name Output log entry.

When no process ID is to be included in the log information:
C507[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];NAME[Figure][user-type]#[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C507[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];NAME[Figure][user-type]#[Figure]option[Figure]unit-name

#
[Figure][user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or name is specified in the REFLOG environment setting parameter.

Example of a log entry:
C507 Dec 15 09:14:22 jp1admin 0 JP1_DEFAULT ;NAME -F AJSROOT1 /group/*

The following table describes the items that are specific to these formats.

Table C-59 Items specific to the Unit Name Output log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsname command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID Always 0. 1
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
option# The options specified in the executed ajsname command are output. 1 to 500
unit-name The unit name specified in the executed ajsname command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(60) Formats of the Unit Definitions Exported log entry

The following are the formats of the Unit Definitions Exported log entry.

When no process ID is to be included in the log information:
C508[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];EXPORT[Figure][user-type]#[Figure]option

When a process ID is to be included in the log information:
C508[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];EXPORT[Figure][user-type]#[Figure]option

#
[Figure][user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or export is specified in the REFLOG environment setting parameter.

Example of a log entry:
C508 Dec 15 09:14:22 jp1admin 0 JP1_DEFAULT ;EXPORT -o c:\temp\file AJSROOT1:/group/net

The following table describes the items that are specific to these formats.

Table C-60 Items specific to the Unit Definitions Exported log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsexport command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
option# The options specified in the executed ajsexport command are output. 1 to 500

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(61) Formats of the Unit Status Displayed (Abnormal End) log entry

The following are the formats of the Unit Status Displayed (Abnormal End) log entry.

When no process ID is to be included in the log information:
C509[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];SHOW[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification][Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C509[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];SHOW[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification][Figure]option[Figure]unit-name

Logging conditions:
An entry is output to the log only if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter, and all or show is specified in the REFLOG environment setting parameter.

Example of a log entry:
C509 Mar 05 12:18:06 [2688] jp1admin KAVS0161-I JP1_DEFAULT ;SHOW [ADMIN] -F AJSROOT1 -l -g 1 -X auto /net

The following table describes the items that are specific to these formats.

Table C-61 Items specific to the Unit Status Displayed (Abnormal End) log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsshow command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. 10
host-name The name of the logical host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the ajsshow command are output. Note that the value specified for the -f, -t, or -i option is always enclosed in double quotation marks (""). 1 to 500
unit-name The unit name specified in the ajsshow command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(62) Formats of the Unit Definitions Output (Abnormal End) log entry

The following are the formats of the Unit Definitions Output (Abnormal End) log entry.

When no process ID is to be included in the log information:
C510[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];PRINT[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification][Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C510[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];PRINT[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification][Figure]option[Figure]unit-name

Logging conditions:
An entry is output to the log only if yes is specified in the AJSLOGOUTPUTEXTEND environment parameter, and all or print is specified in the REFLOG environment setting parameter.

Example of a log entry:
C510 Mar 05 12:20:56 [2552] jp1admin KAVS0161-I JP1_DEFAULT ;PRINT [ADMIN] -F AJSROOT1 -a /net

The following table describes the items that are specific to these formats.

Table C-62 Items specific to the Unit Definitions Output (Abnormal End) log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsprint command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. 10
host-name The name of the logical host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the ajsprint command are output. Note that the value specified for the -f or -t option is always enclosed in double quotation marks (""). 1 to 500
unit-name The unit name specified in the ajsprint command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(63) Formats of the Unit Definitions Backed Up (Abnormal End) log entry

The following are the formats of the Unit Definitions Backed Up (Abnormal End) log entry.

When no process ID is to be included in the log information:
C511[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];BACKUP[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification][Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C511[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];BACKUP[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification][Figure]option[Figure]unit-name

Logging conditions:
An entry is output to the log if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter, and all or backup is specified in the REFLOG environment setting parameter.

Example of a log entry:
C511 Mar 05 12:21:49 [1196] jp1admin KAVS0161-I JP1_DEFAULT ;BACKUP [ADMIN] -F AJSROOT1 -e -m -n box1 /net

The following table describes the items that are specific to these formats.

Table C-63 Items specific to the Unit Definitions Backed Up (Abnormal End) log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsbackup command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. 10
host-name The name of the logical host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option# The options specified in the ajsbackup command are output. 1 to 500
unit-name The unit name specified in the ajsbackup command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(64) Formats of the Unit Name Output (Abnormal End) log entry

The following are the formats of the Unit Name Output (Abnormal End) log entry.

When no process ID is to be included in the log information:
C512[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];NAME[Figure][user-type][Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C512[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];NAME[Figure][user-type][Figure]option[Figure]unit-name

Logging conditions:
An entry is output to the log only if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter, and all or name is specified in the REFLOG environment setting parameter.

Example of a log entry:
C512 Mar 05 12:22:13 [2540] jp1admin KAVS0161-I JP1_DEFAULT ;NAME [ADMIN] -F AJSROOT1 /net

The following table describes the items that are specific to these formats.

Table C-64 Items specific to the Unit Name Output (Abnormal End) log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsname command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. 10
host-name The name of the logical host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
option# The options specified in the ajsname command are output. 1 to 500
unit-name The unit name specified in the ajsname command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(65) Formats of the Jobnet Registration for Execution Information Exported log entry

The following are the formats of the Jobnet Registration for Execution Information Exported log entry.

When no process ID is to be included in the log information:
C513[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RGEXP[Figure][user-type]#[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C513[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RGEXP[Figure][user-type]#[Figure]option[Figure]unit-name

#
[Figure][user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or rgexport is specified in the REFLOG environment setting parameter.

Example of a log entry:
C513 Dec 07 19:14:15 jp1admin 0 JP1_DEFAULT ;RGEXP -F AJSROOT1 -e f /group/*

The following table describes the items that are specific to these formats.

Table C-65 Items specific to the Jobnet Registration for Execution Information Exported log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsrgexport command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
option# The options specified in the executed ajsrgexport command are output. 1 to 500
unit-name The unit name specified in the executed ajsrgexport command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(66) Formats of the Jobnet Information Output by Export of Jobnet Registration for Execution Information log entry

The following are the formats of the Jobnet Information Output by Export of Jobnet Registration for Execution Information log entry.

When no process ID is to be included in the log information:
C514[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RGEXP[Figure][user-type]#[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C514[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RGEXP[Figure][user-type]#[Figure]option[Figure]unit-name

#
[Figure][user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or rgexport is specified in the REFLOG environment setting parameter.

Example of a log entry:
C514 Dec 07 19:14:15 jp1admin 0 JP1_DEFAULT ;RGEXP -F AJSROOT1 -e f /group/rootnet1

The following table describes the items that are specific to these formats.

Table C-66 Items specific to the Jobnet Information Output by Export of Jobnet Registration for Execution Information log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsrgexport command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
option# The options specified in the executed ajsrgexport command are output. 1 to 500
unit-name The jobnet name specified in the ajsrgexport command is output. The command exported the information about the jobnet registration for execution for the specified jobnet. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(67) Formats of the Jobnet Release Information Referenced log entry

The following are the formats of the Jobnet Release Information Referenced log entry.

When no process ID is to be included in the log information:
C515[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RELEASEREF[Figure][user-type]#[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
C515[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];RELEASEREF[Figure][user-type]#[Figure]option[Figure]unit-name

#
[Figure][user-type] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Logging conditions:
An entry is output to the log only if all or release is specified in the REFLOG environment setting parameter.

Example of a log entry:
C515 Dec 07 19:14:15 jp1admin 0 JP1_DEFAULT ;RELEASEREF -F AJSROOT1 -i /group/releasenet

The following table describes the items that are specific to these formats.

Table C-67 Items specific to the Jobnet Release Information Referenced log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the ajsrelease command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID The ID of the message reporting the result of the operation is output. If the operation was performed successfully, 0 is output. 1 or 10
host-name The name of the host requested to perform the operation is output. 1 to 255
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
option# The options specified in the ajsrelease command are output. These options were specified when the command was used to output release information. 1 to 500
unit-name The unit name specified in the executed ajsrelease command is output. 1 to 930

#
If the value of an option (the part that is not the option name and the subsequent space ([Figure])) exceeds 64 bytes, only 64 bytes are output.
If the size of all options exceeds 500 bytes, only 500 bytes are output. Note that if the 500-byte limit is exceeded before an option name is complete, that option is not output.

(68) Formats of the Command Processing Started log entry

The following are the formats of the Command Processing Started log entry.

When no process ID is to be included in the log information:
I001[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];START[Figure]command-name[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
I001[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];START[Figure]command-name[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Example of a log entry:
I001 Dec 15 09:14:22 jp1admin - JP1_DEFAULT ;START ENTRY -F AJSROOT1 -n /group/net

The following table describes the items that are specific to these formats.

Table C-68 Items specific to the Command Processing Started log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the applicable command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID Always a hyphen (-). 1
host-name The name of the host requested to perform the operation is output. 1 to 255
command-name The applicable command name is output in upper-case alphabetic characters.
Example:
For the ajsentry command, the prefix (ajs) is removed and the remainder of the name is output in upper case (ENTRY).		 7 to 11
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option The options specified in the executed command are output. 1 to 500
unit-name The unit name specified in the executed command is output. 1 to 930

Note
The Command Processing Started log entry might not be output if an incorrectly specified option value results in an error or a non-existing unit name is specified. The log entry also might not be output if, while JP1/AJS3 - View is being used, an error occurs before definitions are updated or the existing definitions are not changed.

(69) Formats of the Command-to-Scheduler Service Processing Request Started log entry

The following are the formats of the Command-to-Scheduler Service Processing Request Started log entry.

When no process ID is to be included in the log information:
I002[Figure]date[Figure]time[Figure]user-name[Figure]message-ID[Figure]host-name[Figure];REQUEST[Figure]command-name[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

When a process ID is to be included in the log information:
I002[Figure]date[Figure]time[Figure][process-ID][Figure]user-name[Figure]message-ID[Figure]host-name[Figure];REQUEST[Figure]command-name[Figure][user-type]#[Figure][requesting-host-IP-address,requesting-source-identification] #[Figure]option[Figure]unit-name

#
[Figure][user-type][Figure][requesting-host-IP-address,requesting-source-identification] is output if yes is specified in the AJSLOGOUTPUTEXTEND environment setting parameter.

Example of a log entry:
I002 Dec 15 09:14:22 jp1admin - JP1_DEFAULT ;REQUEST ENTRY -F AJSROOT1 -n /group/net

The following table describes the items that are specific to these formats.

Table C-69 Items specific to the Command-to-Scheduler Service Processing Request Started log entry (scheduler information log)

Item Description Length (bytes)
user-name The name of the JP1 user who executed the applicable command is output. If a JP1 user without the execution permission for the command attempted to execute the command, a NULL character string is output. 0 to 20
message-ID Always a hyphen (-). 1
host-name The name of the host requested to perform the operation is output. 1 to 255
command-name The applicable command name is output in upper-case alphabetic characters.
Example:
For the ajsentry command, the prefix (ajs) is removed and the remainder of the name is recorded in upper case (ENTRY).		 7 to 11
user-type The type of the user (ADMIN or USER) who performed the operation is output.
  • ADMIN
    A user who is a member of the Administrators group or has superuser privileges
  • USER
    A general user
 4 or 5
requesting-host-IP-address The IP address of the host used to perform the operation is output.
This IP address is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.		 7 to 15
requesting-source-identification The information for identifying the source requesting the operation is output. This information is output only if the user performed the operation from JP1/AJS3 - View or JP1/AJS3 - Definition Assistant, or if the user remotely executed the command.
  • JP1/AJS2-View
    Indicates that the operation was performed from JP1/AJS3 - View.
  • JP1/AJS2-DA (IN = export-source-file-name, OUT = export-execution-result-file-name)
  • REMOTE
    Indicates that the user remotely executed the command or that a remote jobnet executed the command.
If the length of the information exceeds 100 bytes, only 100 bytes are output.		 1 to 100
option The options specified in the executed command are output. 1 to 500
unit-name The unit name specified in the executed command is output. 1 to 930

Note
The Command-to-Scheduler Service Processing Request Started log entry is not output if an error occurs before a processing request is issued to the scheduler service (for example, an incorrectly specified option value results in an error or a non-existing unit name is specified).
In the following cases, the log entry is output twice for a single execution of the command:
  • The -C option is specified in the ajssuspend command.
  • The -a or -c option is specified in the ajsrelease command.

[Contents][Back][Next]

[Trademarks]

Copyright (C) 2009, 2010, Hitachi, Ltd.
Copyright (C) 2009, 2010, Hitachi Solutions, Ltd.