Job Management Partner 1/Integrated Management - Manager Quick Reference

3.1.2 Verifying that the correlation event is generated

After you have finished specifying the correlation event conditions, check whether the correlation event is generated according to your specifications.

To check whether the correlation event is generated as specified:

1. Using the procedure given in 1.2.2 Verifying that you can execute a command, enter the following settings in the Execute Command window.
   

   Item	Setting to enter
   Target host	hostA
   Command	jevsend -e SEVERITY=Error

   On host A, verify that an event of severity level Error is generated.
   
2. Change the name of the target host to hostB, and repeat step 1.
   On host B, verify that an event of severity level Error is generated.
   
3. Change the name of the target host to hostC, and repeat step 1.
   On host C, verify that an event of severity level Error is generated.
   

Under Type in the events list, the fact that a correlation event was generated is indicated by the following icons:

Type	Explanation
	Indicates that the correlation event was successful.
	Indicates that the correlation event was not successful.

For this example, verify that the icon indicating that the correlation event was successful is displayed in the events list.

Keywords:

correlation event, severity, consolidation, summary, event, succeeded, failed, generate, do not generate

[Contents][Back][Next]

All Rights Reserved. Copyright (C) 2009, Hitachi, Ltd.