Preface

This manual is intended for system administrators and system designers.

This manual assumes that the user has already read the manual OpenTP1 Description.

This manual is organized into the following parts, chapters, and appendixes:

Part 1: OpenTP1 Environment Setup

1. Environment Setup

This chapter explains OpenTP1 environment setup and the setup procedure.

Part 2: OpenTP1 Operations

2. OpenTP1 Startup and Termination

This chapter explains the OpenTP1 startup and termination procedures.

3. OpenTP1 Online Operation

This chapter explains the normal online operation for OpenTP1.

4. OpenTP1 File Operations

This chapter explains the operations of files used for OpenTP1.

5. Sending and Receiving Messages

This chapter explains sending and receiving messages.

6. OpenTP1 Optional Facility Operation

This chapter explains the OpenTP1 optional facilities.

7. Operations Under the Multi-node Facility

This chapter explains operations required when the multinode facility is used: environment setup, OpenTP1 startup and termination procedures, OpenTP1 node status display, and file operation and recovery.

8. MultiOpenTP1 Operation

This chapter explains the differences between multi OpenTP1 and normal OpenTP1 operation in units of nodes.

9. Operations Under the System Switchover Facility

This chapter explains operations required when the system switchover facility is used, more specifically, the differences in OpenTP1 operation from when the system switchover facility is not used.

Part 3: OpenTP1 Error Handling Procedures

10. Error Handling Procedures

This chapter classifies OpenTP1 errors and explains actions to be taken for different types of errors. It also explains information to be collected when errors occur and information to be inherited during full recovery.

11. Troubleshooting

This chapter explains what information to acquire when an error occurs in OpenTP1, and how to investigate the problem.

Part 4: OpenTP1 Operation Commands

12. Operation Commands

This chapter explains the operation commands used with OpenTP1 in terms of the input, specification, and details of these commands.

13. Details of Operation Commands

This chapter explains the operation commands in alphabetical order.

Appendixes

A. Dump File Format of Input/Output Queues

This appendix explains the dump file format of input/output queues.

B. OpenTP1 Events

This appendix explains the OpenTP1 events that can be registered with the JP1 Event Service.

C. Information Output for Audited Events

This appendix explains the information output for audited events.

D. Journal Information Collected by the Message Control Facility

This appendix explains journal information collected by the message control facility.

E. Details of Statistics

This appendix provides details of each type of statistics.

F. List of Files Output by OpenTP1

This appendix provides tables that list the files output by OpenTP1.

G. Estimating the Size of the Physical File for a Message Queue

This appendix provides formulae for estimating the size of physical files for a message queue.

H. Estimating the Size of OpenTP1 Files

This appendix explains the formulas for estimating the size of OpenTP1 files.

I. Estimating the Number of Record Locks

This appendix explains the formulae for estimating the number of record locks to be registered by OpenTP1.

J. Estimating the Resources Used by UNIX Message Exchange Functions

This appendix explains the formulae for estimating the resources used by the message exchange functions of UNIX.

K. Estimating the Size of an OpenTP1 File System

This appendix explains the formulae for estimating the size of an OpenTP1 file system.

L. Acquiring Performance Verification Traces

This appendix provides the timing to acquire the performance verification trace and describes contents to be acquired.

M. Details About Scenario Templates

This appendix explains the function of scenario templates and the details about scenario templates such as input scenario variables.

This manual is part of a related set of manuals. The manuals in the set are listed below (with the manual numbers):

OpenTP1 products

• OpenTP1 Version 7 Description (3000-3-D50(E))
• OpenTP1 Version 7 Programming Guide (3000-3-D51(E))
• OpenTP1 Version 7 System Definition (3000-3-D52(E))
• OpenTP1 Version 7 Operation (3000-3-D53(E))
• OpenTP1 Version 7 Programming Reference C Language (3000-3-D54(E))
• OpenTP1 Version 7 Programming Reference COBOL Language (3000-3-D55(E))
• OpenTP1 Version 7 Messages (3000-3-D56(E))
• OpenTP1 Version 7 Tester and UAP Trace User's Guide (3000-3-D57(E))
• OpenTP1 Version 7 TP1/Client User's Guide TP1/Client/W, TP1/Client/P (3000-3-D58(E))
• OpenTP1 Version 7 TP1/Client User's Guide TP1/Client/J (3000-3-D59(E))
• OpenTP1 Version 7 TP1/LiNK User's Guide (3000-3-D60(E))^#
• OpenTP1 Version 7 Protocol TP1/NET/TCP/IP (3000-3-D70(E))
• OpenTP1 Version 7 TP1/Message Queue User's Guide (3000-3-D90(E))^#
• OpenTP1 Version 7 TP1/Message Queue Messages (3000-3-D91(E))^#
• OpenTP1 Version 7 TP1/Message Queue Application Programming Guide (3000-3-D92(E))^#
• OpenTP1 Version 7 TP1/Message Queue Application Programming Reference (3000-3-D93(E))^#

Other OpenTP1 products

• TP1/Web User's Guide and Reference (3000-3-D62(E))^#

Other related products

• Indexed Sequential Access Method ISAM (3000-3-046(E))
• XP/W (3000-3-047(E))
• Extended Mapping Service 2/Workstation XMAP2/W DESCRIPTION/USER'S GUIDE (3000-7-421(E))
• SEWB 3 General Information (3000-7-450(E))
• Job Management Partner 1/Base User's Guide (3020-3-K06(E))
• Job Management Partner 1/Base Messages (3020-3-K07(E))
• Job Management Partner 1/Base Software Developer's Guide (3020-3-K08(E))

For OpenTP1 protocol manuals, please check whether English versions are available.

#

If you want to use this manual, confirm that it has been published. (Some of these manuals might not have been published yet.)

This manual uses the following abbreviations for product names:

Abbreviation			Full name or meaning
AIX			AIX 5L V5.1
			AIX 5L V5.2
			AIX 5L V5.3
			AIX V6.1
Client .NET		TP1/Client for .NET Framework	uCosminexus TP1/Client for .NET Framework
Connector .NET		TP1/Connector for .NET Framework	uCosminexus TP1/Connector for .NET Framework
DPM			JP1/ServerConductor/Deployment Manager
HI-UX/WE2			HI-UX/workstation Extended Version 2
HP-UX	HP-UX (IPF)		HP-UX 11i V2 (IPF)
			HP-UX 11i V3 (IPF)
	HP-UX (PA-RISC)		HP-UX 11i V1 (PA-RISC)
			HP-UX 11i V2 (PA-RISC)
IPF			Itanium(R) Processor Family
Java			JavaTM
JP1	JP1/AJS2	JP1/AJS2 - Agent	JP1/Automatic Job Management System 2 - Agent
		JP1/AJS2 - Manager	JP1/Automatic Job Management System 2 - Manager
		JP1/AJS2 - View	JP1/Automatic Job Management System 2 - View
	JP1/AJS2 - Scenario Operation	JP1/AJS2 - Scenario Operation Manager	JP1/Automatic Job Management System 2 - Scenario Operation Manager
		JP1/AJS2 - Scenario Operation View	JP1/Automatic Job Management System 2 - Scenario Operation View
		JP1/NETM/Audit	JP1/NETM/Audit - Manager
Linux			Linux(R)
Linux (AMD64/Intel EM64T/x86)			Red Hat Enterprise Linux AS 4 (AMD64 & Intel EM64T)
			Red Hat Enterprise Linux AS 4 (x86)
			Red Hat Enterprise Linux ES 4 (AMD64 & Intel EM64T)
			Red Hat Enterprise Linux ES 4 (x86)
			Red Hat Enterprise Linux 5 (AMD/Intel 64)
			Red Hat Enterprise Linux 5 (x86)
			Red Hat Enterprise Linux 5 Advanced Platform (AMD/Intel 64)
			Red Hat Enterprise Linux 5 Advanced Platform (x86)
Linux (IPF)			Red Hat Enterprise Linux AS 4 (IPF)
			Red Hat Enterprise Linux 5 (Intel Itanium)
			Red Hat Enterprise Linux 5 Advanced Platform (Intel Itanium)
MS-DOS			Microsoft(R) MS-DOS(R)
NETM/DM			JP1/NETM/DM Client
			JP1/NETM/DM Manager
			JP1/NETM/DM SubManager
Oracle			Oracle 10g
			Oracle9i
Solaris			Solaris 8
			Solaris 9
			Solaris 10
TP1/Client		TP1/Client/J	uCosminexus TP1/Client/J
		TP1/Client/P	uCosminexus TP1/Client/P
		TP1/Client/W	uCosminexus TP1/Client/W
			uCosminexus TP1/Client/W(64)
TP1/EE			uCosminexus TP1/Server Base Enterprise Option
			uCosminexus TP1/Server Base Enterprise Option(64)
TP1/Extension 1			uCosminexus TP1/Extension 1
			uCosminexus TP1/Extension 1(64)
TP1/FS/Direct Access			uCosminexus TP1/FS/Direct Access
			uCosminexus TP1/FS/Direct Access(64)
TP1/FS/Table Access			uCosminexus TP1/FS/Table Access
			uCosminexus TP1/FS/Table Access(64)
TP1/High Availability			uCosminexus TP1/High Availability
			uCosminexus TP1/High Availability(64)
TP1/LiNK			uCosminexus TP1/LiNK
TP1/Message Control			uCosminexus TP1/Message Control
			uCosminexus TP1/Message Control(64)
TP1/Message Control/Tester			uCosminexus TP1/Message Control/Tester
TP1/Message Queue			uCosminexus TP1/Message Queue
			uCosminexus TP1/Message Queue(64)
TP1/Message Queue - Access			uCosminexus TP1/Message Queue - Access
			uCosminexus TP1/Message Queue - Access(64)
TP1/Messaging			uCosminexus TP1/Messaging
TP1/Multi			uCosminexus TP1/Multi
TP1/NET/HDLC			uCosminexus TP1/NET/HDLC
TP1/NET/High Availability			uCosminexus TP1/NET/High Availability
			uCosminexus TP1/NET/High Availability(64)
TP1/NET/HSC			uCosminexus TP1/NET/HSC
TP1/NET/Library			uCosminexus TP1/NET/Library
			uCosminexus TP1/NET/Library(64)
TP1/NET/NCSB			uCosminexus TP1/NET/NCSB
TP1/NET/OSAS-NIF			uCosminexus TP1/NET/OSAS-NIF
TP1/NET/OSI-TP			uCosminexus TP1/NET/OSI-TP
TP1/NET/SLU - TypeP2		TP1/NET/Secondary Logical Unit - TypeP2	uCosminexus TP1/NET/Secondary Logical Unit - TypeP2
TP1/NET/TCP/IP			uCosminexus TP1/NET/TCP/IP
			uCosminexus TP1/NET/TCP/IP(64)
TP1/NET/UDP			uCosminexus TP1/NET/User Datagram Protocol
TP1/NET/User Agent			uCosminexus TP1/NET/User Agent
TP1/NET/X25			uCosminexus TP1/NET/X25
TP1/NET/X25-Extended			uCosminexus TP1/NET/X25-Extended
TP1/NET/XMAP3			uCosminexus TP1/NET/XMAP3
TP1/Offline Tester			uCosminexus TP1/Offline Tester
TP1/Online Tester			uCosminexus TP1/Online Tester
TP1/Resource Manager Monitor			uCosminexus TP1/Resource Manager Monitor
TP1/Server Base			uCosminexus TP1/Server Base
			uCosminexus TP1/Server Base(64)
TP1/Shared Table Access			uCosminexus TP1/Shared Table Access
TP1/Web			uCosminexus TP1/Web
Windows 2000			Microsoft(R) Windows(R) 2000 Advanced Server Operating System
			Microsoft(R) Windows(R) 2000 Datacenter Server Operating System
			Microsoft(R) Windows(R) 2000 Professional Operating System
			Microsoft(R) Windows(R) 2000 Server Operating System
Windows Server 2003			Microsoft(R) Windows Server(R) 2003, Datacenter Edition
			Microsoft(R) Windows Server(R) 2003, Enterprise Edition
			Microsoft(R) Windows Server(R) 2003, Standard Edition
Windows Server 2003 R2			Microsoft(R) Windows Server(R) 2003 R2, Enterprise Edition
			Microsoft(R) Windows Server(R) 2003 R2, Standard Edition
Windows Server 2003 x64 Editions			Microsoft(R) Windows Server(R) 2003, Datacenter x64 Edition
			Microsoft(R) Windows Server(R) 2003, Enterprise x64 Edition
			Microsoft(R) Windows Server(R) 2003, Standard x64 Edition
Windows Server 2003 R2 x64 Editions			Microsoft(R) Windows Server(R) 2003 R2, Enterprise x64 Edition
			Microsoft(R) Windows Server(R) 2003 R2, Standard x64 Edition
Windows Server 2008			Microsoft(R) Windows Server(R) 2008 Datacenter (x86)
			Microsoft(R) Windows Server(R) 2008 Enterprise (x86)
			Microsoft(R) Windows Server(R) 2008 Standard (x86)
Windows Server 2008 x64 Editions			Microsoft(R) Windows Server(R) 2008 Datacenter (x64)
			Microsoft(R) Windows Server(R) 2008 Enterprise (x64)
			Microsoft(R) Windows Server(R) 2008 Standard (x64)
Windows Vista			Microsoft(R) Windows Vista(R) Business (x86)
			Microsoft(R) Windows Vista(R) Enterprise (x86)
			Microsoft(R) Windows Vista(R) Ultimate (x86)
Windows Vista x64 Editions			Microsoft(R) Windows Vista(R) Business (x64)
			Microsoft(R) Windows Vista(R) Enterprise (x64)
			Microsoft(R) Windows Vista(R) Ultimate (x64)
Windows XP			Microsoft(R) Windows(R) XP Professional Operating System

• The term Windows is used to indicate Windows Server 2003, Windows XP and Windows Vista if the difference in functions among them need not be considered.
• The term UNIX is used to indicate AIX, HP-UX, Linux, and Solaris.

This manual also uses the following acronyms:

Acronym	Full name or meaning
ANSI	American National Standards Institute
AP	Application Program
CPU	Central Processing Unit
CUP	Client User Program
DAM	Direct Access Method
DAM FRC	DAM File Recovery
DHCP	Dynamic Host Configuration Protocol
DID	Distributed Identifier
DML	Data Manipulation Language
DNS	Domain Name System
HA	High Availability
I/O	Input/Output
IP	Internet Protocol
ISAM	Indexed Sequential Access Method
IST	Internode Shared Table
LAN	Local Area Network
MCF	Message Control Facility
MHP	Message Handling Program
MQA	Message Queue Access
MSDTC	Microsoft Distributed Transaction Coordinator
NIS	Network Information Service
OS	Operating System
OSI	Open Systems Interconnection
OSI TP	Open Systems Interconnection Transaction Processing
PRF	Performance
RI	Recovery Information
RMM	Resource Manager Monitor
RPC	Remote Procedure Call
RTS	Real Time Statistic
SPP	Service Providing Program
TAM	Table Access Method
TAM FRC	TAM File Recovery
UAP	User Application Program
UID/GID	User Identifier/Group Identifier
UOC	User Own Coding
UTC	Coordinated Universal Time
VM	Virtual Machine
XA	Extended Architecture
XAR	Extended Architecture Resource

This manual uses the following conventions in diagrams:

The JIS code and ASCII code keyboards are different in the input characters represented by the following codes. In this manual, the use of a JIS keyboard is assumed for these characters.

Code	JIS keyboard	ASCII keyboard
(5c)16	(yen symbol)	\ (backslash)
(7e)16	(overline)	~ (tilde)

The following table explains the fonts used in this manual:

Font	Convention
Bold	Bold type indicates text on a window, other than the window title. Such text includes menus, menu options, buttons, radio box options, or explanatory labels. For example: From the File menu, choose Open. Click the Cancel button. In the Enter name entry box, type your name.
Italics	Italics are used to indicate a placeholder for some actual text to be provided by the user or system. For example: Write the command as follows: copy source-file target-file The following message appears: A file was not found. (file = file-name) Italics are also used for emphasis. For example: Do not delete the configuration file.
Code font	A code font indicates text that the user enters without change, or text (such as messages) output by the system. For example: At the prompt, enter dir. Use the send command to send mail. The following message is displayed: The password is incorrect.

The following table explains the symbols used in this manual:

Symbol	Convention
|	In syntax explanations, a vertical bar separates multiple items, and has the meaning of OR. For example: A|B|C means A, or B, or C.
{ }	In syntax explanations, curly brackets indicate that only one of the enclosed items is to be selected. For example: {A|B|C} means only one of A, or B, or C.
[ ]	In syntax explanations, square brackets indicate that the enclosed item or items are optional. For example: [A] means that you can specify A or nothing. [B|C] means that you can specify B, or C, or nothing.
...	In coding, an ellipsis (...) indicates that one or more lines of coding are not shown for purposes of brevity. In syntax explanations, an ellipsis indicates that the immediately preceding item can be repeated as many times as necessary. For example: A, B, B, ... means that, after you specify A, B, you can specify B as many times as necessary.
~	The value for the preceding item must be specified in accordance with the attributes listed immediately following the swung dash.
<< >>	Default value assumed when specification is omitted.
< >	Syntax element (see below).
(( ))	Range of specifiable values.

Conventions for permitted characters

In most cases, only the following characters are permitted as syntax elements (if other characters are permitted, the manual will state this explicitly):

Type	Definition
Upper-case alphabetic characters	A to Z and underscore (_)
Lower-case alphabetic characters	a to z
Alphabetic characters	A to Z, a to z
Alphabetic symbols	Alphabetic characters (A to Z, a to z), #, @, and $
Numeric characters	0 to 9
Alphanumeric characters	A to Z, a to z, 0 to 9
Special characters	*
Unsigned integers	Numeric values (0 to 9)
Hexadecimals	Numeric values (0 to 9), A to F, and a to f (However, if the manual specifies numeric characters (0 to 9) and alphabetic characters a to f, the hexadecimal value you specify cannot include the characters A to F.)
Identifiers	Alphanumeric character string beginning with an alphabetic character (A to Z, a to z)
Symbolic names	String of alphanumeric symbols beginning with an alphabetic symbol
Character strings	Array of any characters
Path names	Symbolic name, slash (/), and period (.) (The path name depends on the OS being used.)
OpenTP1 file names	Character string consisting of alphabetic characters (A to Z, a to z), numeric characters (0 to 9), period (.), underscore (_), and @ (maximum length of 14 characters)

This manual uses the following conventions:

• 1 KB (kilobyte) is 1,024 bytes.
• 1 MB (megabyte) is 1,024² bytes.
• 1 GB (gigabyte) is 1,024³ bytes.
• 1 TB (terabyte) is 1,024⁴ bytes.

For the Windows version of OpenTP1, there are some notational differences from the description in the manual. The following table describes these differences.

Item	Description in the manual	Change to:
Environment variable	$aaaaaa Example: $DCDIR	%aaaaaa% Example: %DCDIR%
Path name separator	Colon (:)	Semicolon (;)
Directory name separator	Slash (/)	Backslash (\)
Absolute path name	A path from the root directory Example: /tmp	A path name from a drive letter and the root directory Example: C:\tmp
Executable file name	File name only (without an extension) Example: mcfmngrd	File name with an extension Example: mcfmngrd.exe
make command	make	nmake

The version numbers of Hitachi program products are usually written as two sets of two digits each, separated by a hyphen. For example:

• Version 1.00 (or 1.0) is written as 01-00.
• Version 2.05 is written as 02-05.
• Version 2.50 (or 2.5) is written as 02-50.
• Version 12.25 is written as 12-25.

The version number might be shown on the spine of a manual as Ver. 2.00, but the same version number would be written in the program as 02-00.

Please check the availability of the products and manuals for HAmonitor, ServerConductor/DeploymentManager, Cosminexus, and Job Management Partner 1/Automatic Job Management System 2.