Hitachi

JP1 Version 13 JP1/IT Desktop Management 2 Configuration Guide


2.10.2 Procedure for creating a resource group on the primary server

After JP1/IT Desktop Management 2 has been installed, use Windows Server Failover Cluster to create a JP1/IT Desktop Management 2 group and register resources. To register resources:

  1. Create a management server group.

    Create a new empty role for the management server.

  2. Register the resources that are necessary for the group you created.

    The following table lists the resources you need to register in the group:

    Resource type

    Resource name

    Resources other than JP1/IT Desktop Management 2 service resources

    Client access point#1

    Storage (shared disk)

    JP1/IT Desktop Management 2 service resources (generic services)

    JP1_ITDM2_DB Service

    JP1_ITDM2_DB Cluster Service

    JP1_ITDM2_Web Container

    JP1_ITDM2_Web Server#2

    JP1_ITDM2_Service

    JP1_ITDM2_Agent Control

    JP1_ITDM2_Relay Manager Service#3

    #1: For the network name, specify the logical host name used in JP1/IT Desktop Management 2. For the IP address, specify the logical IP address used in JP1/IT Desktop Management 2.

    #2: If the OS is Windows Server 2019, Windows Server 2016 or Windows Server 2012, you must create resources from the CLI.

    Start PowerShell from the command prompt as a user with administrator permissions, and then execute the following command:

    Get-ClusterResource "name-of-JP1_ITDM2_Web Server-service-resource" | Set-ClusterParameter -Name StartupParameters -value ""

    #3: Only perform in the case of the primary management server with multi-server configuration.

  3. Set the primary server as the priority server.

  4. Bring the resources other than JP1/IT Desktop Management 2 service resources online.

    The JP1/IT Desktop Management 2 service resources (generic services) remain offline.

The setting items and the setting values for each resource are as follows.

Settings for resources other than JP1/IT Desktop Management 2 service resources

Resource name

Setting item

Setting value

  • Client access point

  • Storage (shared disk)

Period for restarts (mm:ss)

15:00 (recommended)

Maximum restarts in the specified period

1 (recommended)

Pending timeout (mm:ss)

05:00 (recommended)

JP1_ITDM2_DB Service settings

Resource name

Setting item

Setting value

JP1_ITDM2_DB Service

Name

Specify a name.

Type

Generic Service

Service name

Set HiRDBEmbeddedEdition_JE1.

Dependency

Set the network name resource and the shared disk (physical disk) resource.

Period for restarts (mm:ss)

00:00 (fixed)

Maximum restarts in the specified period

0 (fixed)

Pending timeout (mm:ss)

05:00 (recommended)

Possible owners

Set both the primary and standby servers.

Registry Replication

Not specified.

JP1_ITDM2_DB Cluster Service settings

Resource name

Setting item

Setting value

JP1_ITDM2_DB Cluster Service

Name

Specify a name.

Type

Generic Service

Service name

Set HiRDBClusterService_JE1.

Dependency

Set a resource for JP1_ITDM2_DB Service.

Period for restarts (mm:ss)

15:00 (recommended)

Maximum restarts in the specified period

1 (recommended)

Pending timeout (mm:ss)

05:00 (recommended)

Possible owners

Set both the primary and standby servers.

Registry Replication

Not specified.

JP1_ITDM2_Web Container settings

Resource name

Setting item

Setting value

JP1_ITDM2_Web Container

Name

Specify a name.

Type

Generic Service

Service name

Set JP1_DTNAVI_WEBCON.

Dependency

Set the JP1_ITDM2_DB Cluster Service resource.

Period for restarts (mm:ss)

15:00 (recommended)

Maximum restarts in the specified period

1 (recommended)

Pending timeout (mm:ss)

05:00 (recommended)

Possible owner

Set both the primary and standby servers.

Registry Replication

Not specified.

JP1_ITDM2_Web Server settings

Resource name

Setting item

Setting value

JP1_ITDM2_Web Server

Name

Specify a name.

Type

Generic Service

Service name

Set JP1_DTNAVI_WEBSVR.

Dependency

Set the network name resource.

Period for restarts (mm:ss)

15:00 (recommended)

Maximum restarts in the specified period

1 (recommended)

Pending timeout (mm:ss)

05:00 (recommended)

Possible owner

Set both the primary and standby servers.

Registry Replication

Not specified.

JP1_ITDM2_Service settings

Resource name

Setting item

Setting value

JP1_ITDM2_Service

Name

Specify a name.

Type

Generic Service

Service name

Set JP1_DTNAVI_MGRSRV.

Dependency

Set the JP1_ITDM2_DB Cluster Service resource.

Period for restarts (mm:ss)

15:00 (recommended)

Maximum restarts in the specified period

1 (recommended)

Pending timeout (mm:ss)

05:00 (recommended)

Possible owner

Set both the primary and standby servers.

Registry Replication

Not specified.

JP1_ITDM2_Agent Control settings

Resource name

Setting item

Setting value

JP1_ITDM2_Agent Control

Name

Specify a name.

Type

Set a generic service.

Service name

Set JP1_DTNAVI_AGCTRL.

Dependency

Set the JP1_ITDM2_DB Cluster Service resource.

Period for restarts (mm:ss)

15:00 (recommended)

Maximum restarts in the specified period

1 (recommended)

Pending timeout (mm:ss)

05:00 (recommended)

Possible owner

Set both the primary and standby servers.

Registry Replication

Not specified.

JP1_ITDM2_Relay Manager Service settings

Resource name

Setting item

Setting value

JP1_ITDM2_Relay Manager Service

Name

Specify a name.

Type

Set a generic service.

Service name

Set the JP1_DTNAVI_RLYMGRSRV Service resource.

Dependency

Set the JP1_ITDM2_DB Cluster Service resource.

Period for restarts (mm:ss)

15:00 (recommended)

Maximum restarts in the specified period

1 (recommended)

Pending timeout (mm:ss)

05:00 (recommended)

Possible owner

Set both the primary and standby servers.

Registry Replication

Not specified.