A.6 Service templates list which require Connection Destination definitions Addition

JP1/AO Connection Destination definitions required for service templates are shown below.

#	Manual section	Template name	Property key	Property name	Required Connection Destination definitions
1	2.4.1 Add JP1/Base monitoring settings	Add JP1/Base monitoring settings	common.targetHostList	List of host names for monitor server	All hosts in this list must have Connection Destination definitions.
2	2.4.3 Deletion of nodes monitored by JP1/Cm2	Deletion of nodes monitored by JP1/Cm2	-	-	"localhost" must have Connection Destination definitions.
3	2.4.3 Deletion of nodes monitored by JP1/Cm2	Deletion of nodes monitored by JP1/Cm2	jp1cm2nnm.nnmHostName	Host name of an NNMi server	This must have Connection Destination definitions.
4	2.4.5 Adding of a node to be monitored by JP1/Cm2	Adding of a node to be monitored by JP1/Cm2	-	-	"localhost" must have Connection Destination definitions.
5	2.4.5 Adding of a node to be monitored by JP1/Cm2	Adding of a node to be monitored by JP1/Cm2	jp1cm2nnm.nnmHostName	NNMi server host name	This must have Connection Destination definitions.
6	2.4.7 Replicating a JP1/PFM alarm definition	Replicating a JP1/PFM alarm definition	jp1pfm.pfmHostName	PFM management server host name	This must have Connection Destination definitions.
7	2.4.8 Create JP1/VERITAS Backup Policy	Create JP1/VERITAS Backup Policy	-	-	"localhost" must have Connection Destination definitions.
8	2.4.8 Create JP1/VERITAS Backup Policy	Create JP1/VERITAS Backup Policy	jp1veritas.targetHost	Host name of the active backup server	This must have Connection Destination definitions.
9	2.4.9 Create JP1/VERITAS Backup Policy(SYSTEM)	Create JP1/VERITAS Backup Policy(SYSTEM)	-	-	"localhost" must have Connection Destination definitions.
10	2.4.9 Create JP1/VERITAS Backup Policy(SYSTEM)	Create JP1/VERITAS Backup Policy(SYSTEM)	jp1veritas.targetHost	Host name of the active backup server	This must have Connection Destination definitions.
11	2.4.10 Delete monitoring setting	Delete monitoring setting	-	-	"localhost" must have Connection Destination definitions.
12	2.4.10 Delete monitoring setting	Delete monitoring setting	jp1cm2nnm.nnmHostName	Host name of NNMi server	This must have Connection Destination definitions.
13	2.4.10 Delete monitoring setting	Delete monitoring setting	jp1pfm.pfmHostName	PFM management server host name	This must have Connection Destination definitions.
14	2.4.10 Delete monitoring setting	Delete monitoring setting	jp1pfm.pfmRMHostName	Host name of PFM-RM server	This must have Connection Destination definitions.
15	2.4.12 Add monitoring setting	Add monitoring setting	-	-	"localhost" must have Connection Destination definitions.
16	2.4.12 Add monitoring setting	Add monitoring setting	jp1cm2nnm.nnmHostName	Host name of NNMi server	This must have Connection Destination definitions.
17	2.4.12 Add monitoring setting	Add monitoring setting	jp1pfm.pfmHostName	PFM management server host name	This must have Connection Destination definitions.
18	2.4.12 Add monitoring setting	Add monitoring setting	jp1pfm.pfmRMHostName	Host name of PFM-RM server	This must have Connection Destination definitions.
19	2.5.1 Register JP1/AJS jobnet for execution	Register JP1/AJS jobnet for execution	jp1ajs.ajsServiceName	Name of the JP1/AJS service for jobnet execution	This must have Connection Destination definitions.
20	2.5.2 JP1/AJS jobnet planned execution registration	JP1/AJS jobnet planned execution registration	common.targetHost	Job server host name	This must have Connection Destination definitions.
21	2.5.3 JP1/AJS jobnet scheduled execution results output	JP1/AJS jobnet scheduled execution results output	common.targetHost	Job server host name	This must have Connection Destination definitions.
22	2.5.4 JP1/AJS root jobnet migration	JP1/AJS root jobnet migration	-	-	"localhost" must have Connection Destination definitions.
23	2.5.4 JP1/AJS root jobnet migration	JP1/AJS root jobnet migration	jp1ajs.hostNameRemote	Host name (job server)	This must have Connection Destination definitions.
24	2.5.4 JP1/AJS root jobnet migration	JP1/AJS root jobnet migration	jp1ajs.hostNameDevelop	Host name (development server)	This must have Connection Destination definitions.
25	2.5.6 JP1/AJS root jobnet migration(SYSTEM)	JP1/AJS root jobnet migration(SYSTEM)	-	-	"localhost" must have Connection Destination definitions.
26	2.5.6 JP1/AJS root jobnet migration(SYSTEM)	JP1/AJS root jobnet migration(SYSTEM)	jp1ajs.hostNameRemote	Host name (job server)	This must have Connection Destination definitions.
27	2.5.6 JP1/AJS root jobnet migration(SYSTEM)	JP1/AJS root jobnet migration(SYSTEM)	jp1ajs.hostNameDevelop	Host name (development server)	This must have Connection Destination definitions.
28	2.5.8 JP1/AJS root jobnet deletion	JP1/AJS root jobnet deletion	-	-	"localhost" must have Connection Destination definitions.
29	2.5.8 JP1/AJS root jobnet deletion	JP1/AJS root jobnet deletion	jp1ajs.hostNameRemote	Host name (job server)	This must have Connection Destination definitions.
30	2.5.10 JP1/AJS root jobnet deletion(SYSTEM)	JP1/AJS root jobnet deletion(SYSTEM)	-	-	"localhost" must have Connection Destination definitions.
31	2.5.10 JP1/AJS root jobnet deletion(SYSTEM)	JP1/AJS root jobnet deletion(SYSTEM)	jp1ajs.hostNameRemote	Host name (job server)	This must have Connection Destination definitions.
32	2.5.12 Obtain JP1/CM2 monitored node list	Obtain JP1/CM2 monitored node list	jp1cm2nnm.nnmHostName	NNMi server host name	This must have Connection Destination definitions.
33	2.5.13 Update JP1/IM-SS Item information	Update JP1/IM-SS Item information	jp1imss.imssServerName	JP1/IM-SS server host name	This must have Connection Destination definitions.
34	2.5.14 Register a JP1/IM-SS Item	Register a JP1/IM-SS Item	jp1imss.imssServerName	JP1/IM-SS server host name	This must have Connection Destination definitions.
35	2.5.15 Get list of JP1/PFM monitoring targets	Get list of JP1/PFM monitoring targets	jp1pfm.pfmRMHostName	JP1/PFM - RM host name	This must have Connection Destination definitions.
36	2.5.16 Get list of JP1/PFM alarm information	Get list of JP1/PFM alarm information	jp1pfm.pfmHostName	PFM management server host name	This must have Connection Destination definitions.
37	2.5.17 Get list of JP1/PFM process monitoring settings	Get list of JP1/PFM process monitoring settings	jp1pfm.jp1pfmWebconHostName	JP1/PFM - Web Console host name	This must have Connection Destination definitions.
38	2.5.18 Execution of instant recovery of JP1/VERITAS	Execution of instant recovery of JP1/VERITAS	jp1veritas.targetHost	Host name of the JP1/VERITAS NetBackup server	This must have Connection Destination definitions.
39	2.5.19 End of instant recovery of JP1/VERITAS	End of instant recovery of JP1/VERITAS	jp1veritas.targetHost	Host name of the JP1/VERITAS NetBackup server	This must have Connection Destination definitions.
40	2.5.19 End of instant recovery of JP1/VERITAS	End of instant recovery of JP1/VERITAS	vmware.powerCLIHost	Host name of the vCenter control server	This must have Connection Destination definitions.
41	2.5.20 Perform JP1/VERITAS backup	Perform JP1/VERITAS backup	jp1veritas.targetHost	Host name of the active back	This must have Connection Destination definitions.
42	2.5.21 Virtual-machine restoration with JP1/VERITAS	Virtual-machine restoration with JP1/VERITAS	jp1veritas.targetHost	Host name of the active backup server	This must have Connection Destination definitions.
43	2.5.22 Get JP1 events	Get JP1 events	jp1im.jp1imHostName	JP1/IM host name	This must have Connection Destination definitions.
44	2.5.23 Get list of JP1 users	Get list of JP1 users	jp1base.jp1BaseHostName	JP1/Base host name	This must have Connection Destination definitions.
45	2.5.24 Get JP1 user mapping definition	Get JP1 user mapping definition	jp1base.jp1BaseHostName	JP1/Base host name	This must have Connection Destination definitions.
46	2.5.25 Batch change of operation users	Batch change of operation users	-	-	"localhost" must have Connection Destination definitions.
47	2.5.25 Batch change of operation users	Batch change of operation users	common.targetHostNameColumn	Column number of host name of agent server	All hosts in this column must have Connection Destination definitions.
48	2.5.25 Batch change of operation users	Batch change of operation users	jp1base.certHostNameColumn	Column number of host name of JP1 authentication server	All hosts in this column must have Connection Destination definitions.
49	2.5.28 Batch change of operation users(SYSTEM)	Batch change of operation users(SYSTEM)	-	-	"localhost" must have Connection Destination definitions.
50	2.5.28 Batch change of operation users(SYSTEM)	Batch change of operation users(SYSTEM)	common.targetHostNameColumn	Column number of host name of agent server	All hosts in this column must have Connection Destination definitions.
51	2.5.28 Batch change of operation users(SYSTEM)	Batch change of operation users(SYSTEM)	jp1base.certHostNameColumn	Column number of host name of JP1 authentication server	All hosts in this column must have Connection Destination definitions.
52	2.5.31 Delete operational user	Delete operational user	jp1base.certHost	Host name of the JP1 authentication server	This must have Connection Destination definitions.
53	2.5.31 Delete operational user	Delete operational user	common.targetHost	Agent server host name	This must have Connection Destination definitions.
54	2.5.32 Delete operational user(SYSTEM)	Delete operational user(SYSTEM)	jp1base.certHost	Host name of the JP1 authentication server	This must have Connection Destination definitions.
55	2.5.32 Delete operational user(SYSTEM)	Delete operational user(SYSTEM)	common.targetHost	Agent server host name	This must have Connection Destination definitions.
56	2.5.33 Add operational user	Add operational user	-	-	"localhost" must have Connection Destination definitions.
57	2.5.33 Add operational user	Add operational user	jp1base.certHost	Host name of the JP1 authentication server	This must have Connection Destination definitions.
58	2.5.33 Add operational user	Add operational user	common.targetHost	Agent server host name	This must have Connection Destination definitions.
59	2.5.34 Add operational user(SYSTEM)	Add operational user(SYSTEM)	-	-	"localhost" must have Connection Destination definitions.
60	2.5.34 Add operational user(SYSTEM)	Add operational user(SYSTEM)	jp1base.certHost	Host name of the JP1 authentication server	This must have Connection Destination definitions.
61	2.5.34 Add operational user(SYSTEM)	Add operational user(SYSTEM)	common.targetHost	Agent server host name	This must have Connection Destination definitions.
62	2.5.35 Change operational user	Change operational user	-	-	"localhost" must have Connection Destination definitions.
63	2.5.35 Change operational user	Change operational user	jp1base.certHost	Host name of the JP1 authentication server	This must have Connection Destination definitions.
64	2.5.35 Change operational user	Change operational user	common.targetHost	Agent server host name	This must have Connection Destination definitions.
65	2.5.36 Change operational user(SYSTEM)	Change operational user(SYSTEM)	-	-	"localhost" must have Connection Destination definitions.
66	2.5.36 Change operational user(SYSTEM)	Change operational user(SYSTEM)	jp1base.certHost	Host name of the JP1 authentication server	This must have Connection Destination definitions.
67	2.5.36 Change operational user(SYSTEM)	Change operational user(SYSTEM)	common.targetHost	Agent server host name	This must have Connection Destination definitions.
68	2.6.1 Get JP1/PFM report	Get JP1/PFM report	jp1pfm.jp1pfmWebconHostName	JP1/PFM - Web Console host name	This must have Connection Destination definitions.
69	2.7.1 Get JP1/AJS and JP1/Base logs	Get JP1/AJS and JP1/Base logs	-	-	"localhost" must have Connection Destination definitions.
70	2.7.1 Get JP1/AJS and JP1/Base logs	Get JP1/AJS and JP1/Base logs	common.targetHost	Host name of the job server	This must have Connection Destination definitions.
71	2.7.2 Get JP1/IM and JP1/Base logs	Get JP1/IM and JP1/Base logs	-	-	"localhost" must have Connection Destination definitions.
72	2.7.2 Get JP1/IM and JP1/Base logs	Get JP1/IM and JP1/Base logs	common.targetHost	Host name of the monitoring	This must have Connection Destination definitions.
73	2.7.3 Changing of the JP1 event action status	Changing of the JP1 event action status	jp1im.jp1imHostName	JP1/IM host name	This must have Connection Destination definitions.
74	2.7.4 Registration of the JP1 event	Registration of the JP1 event	jp1base.jp1BaseHostName	JP1/Base host name	This must have Connection Destination definitions.
75	2.8.1 Execute Remote Command	Execute Remote Command	common.targetHost	Host name of execution target server	This must have Connection Destination definitions.
76	2.9.1 Get Lists of Users from Multiple Servers	Get Lists of Users from Multiple Servers	-	-	"localhost" must have Connection Destination definitions.
77	2.9.1 Get Lists of Users from Multiple Servers	Get Lists of Users from Multiple Servers	OS.Column1	Column number for the server names	All hosts in this column must have Connection Destination definitions.
78	2.9.3 Get Lists of Users from Multiple Servers(SYSTEM)	Get Lists of Users from Multiple Servers(SYSTEM)	-	-	"localhost" must have Connection Destination definitions.
79	2.9.3 Get Lists of Users from Multiple Servers(SYSTEM)	Get Lists of Users from Multiple Servers(SYSTEM)	OS.Column1	Column number for the server names	All hosts in this column must have Connection Destination definitions.
80	2.9.5 Get List of Users from Server	Get List of Users from Server	OS.targetHost	Windows/UNIX server host name	This must have Connection Destination definitions.
81	3.4.1 Delete a virtual server	Delete a virtual server	aws.targetHost	Host name of the AWS control server	This must have Connection Destination definitions.
82	3.4.2 Add a virtual server (deploy)	Add a virtual server (deploy)	aws.targetHost	Host name of the AWS control server	This must have Connection Destination definitions.
83	3.5.1 Start virtual servers	Start virtual servers	aws.targetHost	Host name of the AWS control server	This must have Connection Destination definitions.
84	3.5.3 Stop virtual servers	Stop virtual servers	aws.targetHost	Host name of the AWS control server	This must have Connection Destination definitions.
85	3.6.1 Change virtual server specifications (CPU and memory)	Change virtual server specifications (CPU and memory)	hyperv.targetHost	Hyper-V server host name	This must have Connection Destination definitions.
86	3.6.2 Delete virtual server	Delete virtual server	hyperv.targetHost	Hyper-V server host name	This must have Connection Destination definitions.
87	3.6.3 Add a virtual server (deploy/OS initial settings)	Add a virtual server (deploy/OS initial settings)	-	-	"localhost" must have Connection Destination definitions.
88	3.6.3 Add a virtual server (deploy/OS initial settings)	Add a virtual server (deploy/OS initial settings)	hyperv.targetHost	Hyper-V server host name	This must have Connection Destination definitions.
89	3.6.3 Add a virtual server (deploy/OS initial settings)	Add a virtual server (deploy/OS initial settings)	OS.ipAddressMan	IP address (management LAN)	This must have Connection Destination definitions.
90	3.6.4 Add virtual server (virtual disk)	Add virtual server (virtual disk)	hyperv.targetHost	Hyper-V server host name	This must have Connection Destination definitions.
91	3.7.1 Start virtual server	Start virtual server	-	-	"localhost" must have Connection Destination definitions.
92	3.7.1 Start virtual server	Start virtual server	hyperv.targetHost	Hyper-V server host name	This must have Connection Destination definitions.
93	3.7.3 Restart virtual server	Restart virtual server	-	-	"localhost" must have Connection Destination definitions.
94	3.7.3 Restart virtual server	Restart virtual server	hyperv.targetHost	Hyper-V server host name	This must have Connection Destination definitions.
95	3.7.5 Obtain virtual server information list	Obtain virtual server information list	hyperv.targetHost	Hyper-V server host name	This must have Connection Destination definitions.
96	3.7.6 Stop virtual server	Stop virtual server	hyperv.targetHost	Hyper-V server host name	This must have Connection Destination definitions.
97	3.8.1 Windows update program installation	Windows update program installation	windows.targetHost	Host name of the update information file server	This must have Connection Destination definitions.
98	3.8.1 Windows update program installation	Windows update program installation	OS.updateServerInfoColumn	Execution target server column number	All hosts in this column must have Connection Destination definitions.
99	3.8.3 Windows update program installation(SYSTEM)	Windows update program installation(SYSTEM)	windows.targetHost	Host name of the update information file server	This must have Connection Destination definitions.
100	3.8.3 Windows update program installation(SYSTEM)	Windows update program installation(SYSTEM)	OS.updateServerInfoColumn	Execution target server column number	All hosts in this column must have Connection Destination definitions.
101	3.9.1 Script execution through the vCenter server	Script execution through the vCenter server	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.
102	3.9.2 Modify Virtual Machine Configuration	Modify Virtual Machine Configuration	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.
103	3.9.3 Create Snapshot of Virtual Machine	Create Snapshot of Virtual Machine	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.
104	3.9.4 Delete Virtual Machine	Delete Virtual Machine	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.
105	3.9.5 Remove Virtual Disk from Virtual Machine	Remove Virtual Disk from Virtual Machine	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.
106	3.9.6 Deploy and Setup OS on Virtual Machine	Deploy and Setup OS on Virtual Machine	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.
107	3.9.6 Deploy and Setup OS on Virtual Machine	Deploy and Setup OS on Virtual Machine	OS.ipAddressMan	IP address (management LAN)	This must have Connection Destination definitions.
108	3.9.7 Add Virtual Disk to Virtual Machine	Add Virtual Disk to Virtual Machine	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.
109	3.10.1 Clone Virtual Machine	Clone Virtual Machine	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.
110	3.10.2 Delete Cloned Virtual Machine	Delete Cloned Virtual Machine	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.
111	3.10.3 Migrate Virtual Machine	Migrate Virtual Machine	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.
112	3.10.5 Start Virtual Machine	Start Virtual Machine	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.
113	3.10.7 Restart Virtual Machine	Restart Virtual Machine	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.
114	3.10.9 Get List of Virtual Machines from VMware vSphere	Get List of Virtual Machines from VMware vSphere	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.
115	3.10.10 Pre-check for OS Deployment on Virtual Machine	Pre-check for OS Deployment on Virtual Machine	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.
116	3.10.11 Stop Virtual Machine	Stop Virtual Machine	vmware.targetHost	Host name of VMware vCenter control server	This must have Connection Destination definitions.

To Page Top