9.3.2 Messages related to execution of commands (KNAG1000 to KNAG1999)

• KNAG1000-I

  The setup command ended successfully.

  The setup command terminated normally.

• KNAG1001-I

  The cluster setup command ended successfully.

  The cluster setup command terminated normally.

• KNAG1002-E

  A folder could not be created on the shared disk.

  An attempt to create a folder on the shared disk failed.

  S:

  Cancels command processing.

  O:

  Make sure that the shared disk is accessible.

  When the shared disk is accessible, re-execute cluster setup of JP1/IM - EG for NNMi.

• KNAG1004-I

  The cluster setup command will start.

  The cluster setup command has executed.

• KNAG1005-E

  A command option is invalid.

  The format of a command argument is invalid.

  S:

  Cancels command processing.

  O:

  Check and revise the command arguments, as necessary.

• KNAG1006-E

  The option "option-name" has been duplicated.

  The indicated command option was specified more than once.

  S:

  Cancels command processing.

  O:

  Specify the arguments correctly, according to the Usage description that is output after the error message.

• KNAG1007-E

  The specified logical host "logical-host-name" does not exist.

  The specified logical host name does not exist.

  S:

  Cancels command processing.

  O:

  Correct the logical host name specification and then re-execute the data collection tool.

• KNAG1008-E

  A host has not been specified for the -h option.

  A host name is missing in the -h option.

  S:

  Cancels command processing.

  O:

  Correct the logical host name specification and then re-execute the data collection tool.

• KNAG1009-E

  The shared directory "shared-directory-path" used by the specified logical host "logical-host-name" cannot be found.

  The shared directory used by the indicated logical host cannot be found.

  S:

  Resumes command processing.

  O:

  If the host is at the primary node, mount the shared directory and then re-execute the data collection tool. If the host is at the secondary node, there is no problem because the shared directory is not mounted.

• KNAG1010-E

  The specified directory "data-storage-directory-name" is invalid.

  The specification of the indicated directory is not valid. The directory might not exist.

  S:

  Cancels command processing.

  O:

  Specify the correct data storage directory and then re-execute the data collection tool.

  In Windows, check the following:

  • The specification does not include a reserved device name (AUX, CON, NUL, PRN, COM1 through COM9, LPT1 through LPT9) or any of the symbols ; % & ^ !.

  • The length of the specified directory name does not exceed 128 bytes.

• KNAG1011-W

  A file (file-name) with the same name as the directory already exists.

  A file with the same name as the directory already exists.

  S:

  Cancels command processing.

  O:

  Delete the file with the same name and then re-execute the data collection tool.

• KNAG1012-E

  The directory "directory-name" could not be written to.

  The execution user does not have the permissions to write to the indicated directory.

  S:

  Cancels command processing.

  O:

  Make sure that the following are true and then re-execute the command:

  • The execution user has write permissions for the directory.

  • The disk has sufficient capacity.

• KNAG1013-W

  The directory "directory-path" used by a physical host does not exist.

  The indicated directory used by the physical host does not exist.

  S:

  Resumes processing without collecting data under the directory path.

  O:

  Make sure that the directory path is not disconnected temporarily.

• KNAG1014-E

  The command "command-name" does not exist.

  The indicated command does not exist.

  S:

  Cancels command processing.

  O:

  Check if the command has been deleted. If the command does not exist, re-install JP1/IM - EG for NNMi.

• KNAG1015-W

  The command "command-name" does not exist.

  The indicated command does not exist.

  S:

  Resumes command processing.

  O:

  Check if the command has been deleted. If the command does not exist, re-install JP1/IM - EG for NNMi.

• KNAG1016-E

  There is not enough disk space to execute the command.

  There is not enough disk space to execute the command.

  S:

  Cancels command processing.

  O:

  Check the available disk space, provide more free space by deleting unneeded files, and then re-execute the data collection tool. Delete data collected previously by the tool if it still remains on the disk.

• KNAG1017-E

  There is not enough memory to execute the command.

  There is not enough memory to execute the command.

  S:

  Cancels command processing.

  O:

  Check the available system memory, provide more memory by terminating unneeded processes, and then re-execute the data collection tool.

• KNAG1018-W

  An attempt to acquire the Windows event log "type-of-event-log" has failed.

  An attempt to collect the Windows event log failed.

  type-of-event-log: System or Application

  S:

  Resumes command processing.

  O:

  Use the Event Viewer to collect the Windows event log manually.

• KNAG1019-E

  The specified file "file-name" cannot be read.

  The specified file cannot be read.

  S:

  Cancels command processing.

  O:

  Make sure that you have read permissions for the specified file and then re-execute the command.

• KNAG1020-E

  The specified file "file-name" does not exist.

  The specified file does not exist.

  S:

  Cancels command processing.

  O:

  Specify a file that exists and then re-execute the data collection tool.

• KNAG1021-E

  A file (file-name) with the same name as the directory already exists.

  A file with the same name as the specified data storage directory already exists.

  S:

  Cancels command processing.

  O:

  Specify another directory or delete the file with the same name, and then re-execute the data collection tool.

• KNAG1022-E

  The specified directory "directory-name" cannot be written to.

  An attempt to write to the specified data storage directory failed.

  S:

  Cancels command processing.

  O:

  Specify another directory, or check and revise (if necessary) the execution user's write permissions for the higher directory of the specified directory, and then re-execute the data collection tool.

• KNAG1023-E

  An attempt to create the directory "directory-name" has failed.

  An attempt to create the indicated directory failed.

  S:

  Cancels command processing.

  O:

  Specify another directory, or check and revise (if necessary) the execution user's write permissions for the higher directory of the specified directory, and then re-execute the data collection tool.

• KNAG1024-I

  Data was successfully acquired.

  This message reports that data has been collected successfully.

• KNAG1025-E

  Some of the data could not be acquired.

  Some data could not be acquired. This message is displayed after the message that was displayed during execution.

  S:

  Terminates command processing.

  O:

  Take appropriate action according to the information in the message that was displayed during execution.

• KNAG1026-I

  "information" will be acquired.

  This message reports that the indicated information is being acquired.

  S:

  Resumes command processing.

• KNAG1027-I

  "information" has been acquired.

  This message reports that the indicated information has been acquired.

  S:

  Resumes command processing.

• KNAG1028-W

  "information" could not be acquired.

  This is a warning message reporting that the indicated information was not acquired.

  S:

  Resumes command processing.

  O:

  If there is data to be collected, collect it manually by referencing 10.3 Data to be collected in the event of an error.

• KNAG1029-I

  The directory "directory-name" already exists. The directory will be re-created.

  The specified directory already exists and will be re-created.

  S:

  In Windows: If the user replies, the system deletes the directory and resumes processing.

  In UNIX: The system resumes processing.

  O:

  In Windows: To continue the processing, press any key. To cancel the processing, press the Ctrl + C keys.

  In UNIX: No action is required.

• KNAG1030-I

  The directory "directory-name" does not exist. The directory will be created.

  The indicated directory does not exist and will be created.

  S:

  In Windows: If the user replies, the system creates the directory and resumes processing.

  In UNIX: The system resumes processing.

  O:

  In Windows: To continue the processing, press any key. To cancel the processing, press the Ctrl + C keys.

  In UNIX: No action is required.

• KNAG1031-I

  Data acquisition will now start.

  Data acquisition is starting.

  S:

  Resumes command processing.

• KNAG1032-I

  Execution of the command "command-name" will now start.

  Execution of the indicated command is starting.

  S:

  Resumes command processing.

• KNAG1033-I

  Execution of the command "command-name" will now end. (error level = error-level)

  Execution of the indicated command has ended.

  error-level: Command's return code

  S:

  Resumes command processing.

• KNAG1034-I

  "information" will be acquired. Please wait...

  The indicated information is being acquired. Wait a while.

  S:

  Resumes command processing.

• KNAG1035-E

  An attempt to delete the directory "directory-name" has failed.

  The attempt to delete the indicated directory failed.

  S:

  Cancels command processing.

  O:

  Make sure that the specified directory is not being used by another process or specify another directory, and then re-execute the data collection tool.

• KNAG1036-E

  An attempt to access the information registry has failed. (details = detailed-information)

  An attempt to access the indicated information registry failed.

  detailed-information: Argument passed to the RegOpenKeyEx/RegEnumKeyEx function and the return code

  S:

  Cancels command processing.

  O:

  Contact the system administrator.

• KNAG1037-I

  The following logical hosts are on this host: logical-host-name To acquire information about a logical host, execute the following command:

  command-name -f output-directory-name -h logical-host-name

  There are one or more logical hosts on this computer.

  Execute command-name -h logical-host-name to obtain information about the logical host.

  S:

  Resumes command processing.

  O:

  Execute command-name -h logical-host-name to obtain information about the logical host.

• KNAG1039-W

  An attempt to create the directory "directory-name" has failed.

  The attempt to create the indicated directory failed.

  S:

  Resumes command processing.

  O:

  Check and revise (if necessary) the execution user's write permissions for the higher directory of the specified directory, and then re-execute the data collection tool.

• KNAG1040-W

  An attempt to execute the command "command-name" has failed. (details = detailed-information)

  An attempt to execute the indicated command failed.

  detailed-information: Command's return code

  S:

  Resumes command processing.

  O:

  Take appropriate action according to the message that was displayed immediately before this message.

• KNAG1041-I

  The command "command-name" was successfully executed.

  Execution of the indicated command was successful.

  S:

  Resumes command processing.

• KNAG1042-E

  You do not have the permission necessary to execute the command "command-name".

  The user does not have the permissions required to execute the indicated command.

  S:

  Cancels command processing.

  O:

  Check the command execution permissions.

• KNAG1043-I

  The thread dump file has been deleted.

  Deletion of the thread dump file has been completed.

  S:

  Resumes command processing.

• KNAG1044-I

  Do you want to delete all the core dump files in the directory "directory-name"? [yes/no]

  This is a confirmation message asking whether the core dump files under the indicated directory are to be deleted.

  S:

  If the user enters yes or y, the system deletes the core dump files and then terminates command processing. If the user enters no or n, the system terminates command processing without deleting the core dump files.

  O:

  To delete the core dump files, enter yes or y. To cancel deletion of the core dump files, enter no or n.

• KNAG1045-I

  Do you want to delete all the thread dump files in the directory "directory-name"? [yes/no]

  This is a confirmation message asking whether the thread dump files under the indicated directory are to be deleted.

  S:

  If the user enters yes or y, the system deletes the thread dump files and then terminates command processing. If the user enters no or n, the system terminates command processing without deleting the thread dump files.

  O:

  To delete the thread dump files, enter yes or y. To not delete the thread dump files, enter no or n.

• KNAG1046-E

  The file cannot be written to because a file with the name "file-name" already exists.

  A write operation failed because the specified file already exists.

  S:

  Resumes processing without creating a file.

  O:

  Check the write permissions for the file. If the file is not needed, delete it and then re-execute the data collection tool.

• KNAG1047-I

  "file-name" already exists. Do you want to overwrite it? [yes/no]

  This is a configuration message asking whether the indicated file, which already exists, is to be overwritten.

  S:

  If the user enters yes or y, the system overwrites the file and resumes command processing. If the user enters no or n, the system resumes command processing without overwriting the file.

  O:

  To overwrite the file, enter yes or y. To not overwrite the file, enter no or n.

• KNAG1048-I

  Is the device "device-name" ready? [yes/no]

  This is a confirmation message asking whether the device is ready.

  S:

  If the user enters yes or y, the system performs data collection on the device and then resumes command processing. If the user enters no or n, the system resumes command processing without performing data collection on the device.

  O:

  To perform data collection on the device, enter yes or y. To not perform data collection on the device, enter no or n.

• KNAG1050-E

  The value of the option "option-name" is invalid.

  The specified option value is invalid.

  S:

  Cancels command processing.

  O:

  Check and revise (if necessary) the option value and then re-execute the command.

• KNAG1051-E

  Setup has not been performed yet.

  The -list or the -update option cannot be specified before setup has been completed.

  S:

  Cancels command processing.

  O:

  Execute new setup and then re-execute the command.

• KNAG1052-E

  The operation information file "file-name" already exists.

  The shared directory specified in the -d option of the jegn_setup_cluster command already contains the operation information file.

  S:

  Cancels command processing.

  O:

  Either delete the existing operation information file or change the shared directory, and then re-execute the command.

• KNAG1053-E

  The file "file-name" could not be written to.

  An attempt to write to the indicated file failed because the execution user did not have the required permissions.

  S:

  Cancels command processing.

  O:

  Check and revise (if necessary) the execution user's write permissions for the file and then re-execute the command.

• KNAG1054-E

  An attempt to update the registry information "registry-key" has failed.

  An attempt to update the indicated registry information (such as common definition information or service registration) has failed.

  S:

  Cancels command processing.

  O:

  Use the data collection tool to collect data and then contact the system administrator.

• KNAG1055-I

  The core dump file "file-name" has been successfully deleted.

  Deletion of the core dump file has been completed.

  S:

  Resumes command processing.

• KNAG1056-E

  Setup has already been performed.

  Setup has already been performed, but an attempt was made to perform a new setup.

  S:

  Cancels command processing.

  O:

  Use the -list option to check the settings, specify the -update option and the options whose settings are to be changed, and then re-execute the command.

• KNAG1057-E

  Administrator permissions are required to execute the command.

  This command must be executed by a user who has Administrator permissions.

  S:

  Cancels command processing.

  O:

  Check that the user has the Administrator permissions and then re-execute the command.

• KNAG1058-E

  Execute the command from the administrator console.

  This command must be executed at the administrator console.

  S:

  Cancels command processing.

  O:

  Re-execute the command at the administrator console.

• KNAG1059-E

  The system environment is invalid. (location, reason-code)

  The command cannot be executed because the system environment is invalid.

  S:

  Cancels command processing.

  O:

  Execute installation and setup again.

• KNAG1060-E

  An attempt to open a message file has failed.

  An attempt to open a message file failed.

  S:

  Cancels command processing.

  O:

  In Windows:

  Use the data collection tool to collect data and then contact the system administrator.

  In UNIX:

  Possible causes are listed below. Check the environment.

  • The user might not have read permissions for the files under /opt/jp1eg4nnmi/lib/nls. Grant the read permissions.

  • The number of open files might have reached the maximum permitted in the system. If necessary, revise the kernel parameter.

  • A temporary memory shortage might have occurred. Re-execute the command. Or, terminate any unneeded process.

  • The directory or file might have been deleted. Re-install it.

  If the problem cannot be resolved, use the data collection tool to collect data and then contact the system administrator.

• KNAG1061-E

  The specified logical host name is invalid.

  The specified logical host name is invalid.

  S:

  Cancels command processing.

  O:

  Check and revise (if necessary) the logical host name or specify the correct logical host name, and then re-execute the command.

• KNAG1063-E

  An attempt to register shared definition information has failed.

  An attempt to register common definition information failed.

  S:

  Cancels command processing.

  O:

  Use the data collection tool to collect data and then contact the system administrator.

• KNAG1064-E

  The logical host name specified for the argument does not exist.

  The logical host specified in the argument does not exist.

  S:

  Cancels command processing.

  O:

  Check if the specified logical host was set correctly.

• KNAG1066-E

  A setting in the shared definition information is invalid.

  A setting in the common definition information is invalid.

  S:

  Cancels command processing.

  O:

  Make sure that the common definition information set at the primary node has been migrated to the secondary node, and then re-execute the jegn_setup_cluster command.

• KNAG1067-E

  An attempt to create the file "file-name" has failed.

  An attempt to create the indicated file failed.

  S:

  Cancels command processing.

  O:

  Use the data collection tool to collect data and then contact the system administrator.

• KNAG1900-E

  There is not enough memory. (maintenance-information)

  A memory shortage has occurred.

  S:

  Cancels command processing.

  O:

  Use the data collection tool to collect data and then contact the system administrator.

• KNAG1901-E

  A system error occurred. (maintenance-information)

  A system error occurred.

  S:

  Cancels command processing.

  O:

  Use the data collection tool to collect data and then contact the system administrator.

To Page Top