2.10.2 Procedure for creating a group resource on the primary server

After JP1/IT Desktop Management 2 has been installed, use Windows Server Failover Cluster to create a JP1/IT Desktop Management 2 group and register resources. To register resources:

1. Create a management server group.

   Create a group for the management server that is separate from any cluster groups that are already registered in Windows Server Failover Cluster.

2. Register the resources that are necessary for the group you created.

   The following table lists the resources you need to register in the group:

   Resource type	Resource name
   Resources other than JP1/IT Desktop Management 2 service resources	IP address resource
   	Network name resource
   	Shared disk (physical disk) resource
   JP1/IT Desktop Management 2 service resources (generic services)	JP1_ITDM2_DB Service
   	JP1_ITDM2_DB Cluster Service
   	JP1_ITDM2_Web Container
   	JP1_ITDM2_Web Server#1
   	JP1_ITDM2_Service
   	JP1_ITDM2_Agent Control
   	JP1_ITDM2_Relay Manager Service#2

   #1: If the OS is Windows Server 2019, Windows Server 2016 or Windows Server 2012, you must create resources from the CLI.

   Start PowerShell from the command prompt as a user with administrator permissions, and then execute the following command:

   Get-ClusterResource "name-of-JP1_ITDM2_Web Server-service-resource" | Set-ClusterParameter -Name StartupParameters -value ""

   #2: Only perform in the case of the primary management server with multi-server configuration.

3. Set the primary server as the priority server.

4. Bring the resources other than JP1/IT Desktop Management 2 service resources online.

   The JP1/IT Desktop Management 2 service resources (generic services) remain offline.

The group resource is created.

For details about how to create a group resource, see the documentation for Windows Server Failover Cluster.

The setting items and the setting values for each resource are as follows.

Settings for resources other than JP1/IT Desktop Management 2 service resources

Resource name	Setting item	Setting value
IP address resource Network name resource Shared disk (physical disk) resource	Failover threshold	1 (recommended)
	Failover period (in seconds)	900 (recommended)
	Wait timeout (in seconds)	300 (recommended)

JP1_ITDM2_DB Service settings

Resource name	Setting item	Setting value
JP1_ITDM2_DB Service	Name	Specify a name.
	Resource type	Set a generic service.
	Group	Set the group name of a management server.
	Possible owner	Set both the primary and standby servers.
	Dependency	Set the network name resource and the shared disk (physical disk) resource.
	Service name	Set HiRDBEmbeddedEdition_JE1.
	Registry copy	Not specified.
	Failover threshold	0 (fixed)
	Failover period (in seconds)	0 (fixed)
	Wait timeout (in seconds)	300 (recommended)

JP1_ITDM2_DB Cluster Service settings

Resource name	Setting item	Setting value
JP1_ITDM2_DB Cluster Service	Name	Specify a name.
	Resource type	Set a generic service.
	Group	Set the group name of a management server.
	Possible owner	Set both the primary and standby servers.
	Dependency	Set a resource for JP1_ITDM2_DB Service.
	Service name	Set HiRDBClusterService_JE1.
	Registry copy	Not specified.
	Failover threshold	1 (recommended)
	Failover period (in seconds)	900 (recommended)
	Wait timeout (in seconds)	300 (recommended)

JP1_ITDM2_Web Container settings

Resource name	Setting item	Setting value
JP1_ITDM2_Web Container	Name	Specify a name.
	Resource type	Set a generic service.
	Group	Set the group name of a management server.
	Possible owner	Set both the primary and standby servers.
	Dependency	Set the JP1_ITDM2_DB Cluster Service resource.
	Service name	Set JP1_DTNAVI_WEBCON.
	Registry copy	Not specified.
	Failover threshold	1 (recommended)
	Failover period (in seconds)	900 (recommended)
	Wait timeout (in seconds)	300 (recommended)

JP1_ITDM2_Web Server settings

Resource name	Setting item	Setting value
JP1_ITDM2_Web Server	Name	Specify a name.
	Resource type	Set a generic service.
	Group	Set the group name of a management server.
	Possible owner	Set both the primary and standby servers.
	Dependency	Set the network name resource.
	Service name	Set JP1_DTNAVI_WEBSVR.
	Registry copy	Not specified.
	Failover threshold	1 (recommended)
	Failover period (in seconds)	900 (recommended)
	Wait timeout (in seconds)	300 (recommended)

JP1_ITDM2_Service settings

Resource name	Setting item	Setting value
JP1_ITDM2_Service	Name	Specify a name.
	Resource type	Set a generic service.
	Group	Set the group name of a management server.
	Possible owner	Set both the primary and standby servers.
	Dependency	Set the JP1_ITDM2_DB Cluster Service resource.
	Service name	Set JP1_DTNAVI_MGRSRV.
	Registry copy	Not specified.
	Failover threshold	1 (recommended)
	Failover period (in seconds)	900 (recommended)
	Wait timeout (in seconds)	300 (recommended)

JP1_ITDM2_Agent Control settings

Resource name	Setting item	Setting value
JP1_ITDM2_Agent Control	Name	Specify a name.
	Resource type	Set a generic service.
	Group	Set the group name of a management server.
	Possible owner	Set both the primary and standby servers.
	Dependency	Set the JP1_ITDM2_DB Cluster Service resource.
	Service name	Set JP1_DTNAVI_AGCTRL.
	Registry copy	Not specified.
	Failover threshold	1 (recommended)
	Failover period (in seconds)	900 (recommended)
	Wait timeout (in seconds)	300 (recommended)

JP1_ITDM2_Relay Manager Service settings

Resource name	Setting item	Setting value
JP1_ITDM2_Relay Manager Service	Name	Specify a name.
	Resource type	Set a generic service.
	Group	Set the group name of a management server.
	Possible owner	Set both the primary and standby servers.
	Dependency	Set the JP1_ITDM2_DB Cluster Service resource.
	Service name	Set the JP1_DTNAVI_RLYMGRSRV Service resource.
	Registry copy	Not specified.
	Failover threshold	1 (recommended)
	Failover period (in seconds)	900 (recommended)
	Wait timeout (in seconds)	300 (recommended)

To Page Top