CPU Per Processor(U)
- Organization of this page
Overview
The CPU Per Processor(U) alarm monitors the CPU usage (%) for a processor executed in user mode. If the CPU usage continues to be at or above the threshold, there might be a problem with a specific application.
- Note
-
To monitor a specific processor, copy this alarm and create an alarm by changing the condition expression in the Processor ID field to Processor ID = identifier-of-monitored-processor.
Primary settings
|
PFM - Web Console alarm property |
Settings |
|
|---|---|---|
|
Item |
Detailed item |
|
|
Main Information |
Product |
UNIX |
|
Alarm message |
User mode CPU usage is %CVS2(%CVS1) |
|
|
Enable alarm |
Selected |
|
|
Alarm notification |
Notify when the state changed |
|
|
Notification target |
State changes for the alarm |
|
|
Evaluate all data |
Do not specify. |
|
|
Monitoring time range |
Always monitor |
|
|
Report alarm when the following damping condition is reached |
Selected |
|
|
occurrence(s) during |
2 |
|
|
interval(s) |
3 |
|
|
Alarm Conditions 1 |
Record |
CPU - Per Processor Detail (PI_CPUP) |
|
Field |
Processor ID |
|
|
Abnormal condition |
Processor ID >= 0# |
|
|
Warning condition |
Processor ID >= 0# |
|
|
Alarm Conditions 2 |
Record |
CPU - Per Processor Detail (PI_CPUP) |
|
Field |
User % |
|
|
Abnormal condition |
User % > 85 |
|
|
Warning condition |
User % > 65 |
|
|
Actions |
|
-- |
|
Command |
-- |
|
|
SNMP |
Abnormal, Warning, Normal |
|
- Legend:
-
--: Setting is always ignored.
- #
-
Set the identifier of the processor to be monitored. The value used in the table shows an example of setting a condition value that satisfies the Processor ID field.
Alarm tables
PFM UNIX Template Alarms [CPU] 09.00
Related reports
Reports/UNIX/Troubleshooting/Real-Time/CPU Per Processor Usage