Logical Disk Free
- Organization of this page
Overview
The Logical Disk Free alarm monitors the unused area (MB) in the entire usable disk space. If the size of unused area is too small, insufficient disk space is indicated.
- Note
-
To monitor a specific disk, copy this alarm and create an alarm by changing the condition expression in the ID field to ID = name-of-monitored-logical-disk-volume.
Primary settings
PFM - Web Console alarm property |
Settings |
|
---|---|---|
Item |
Detailed item |
|
Main Information |
Product |
Windows |
Alarm message |
Disk Space(%CVS1) = %CVS2 MB |
|
Enable alarm |
Selected |
|
Alarm notification |
Notify when the state changed |
|
Notification target |
State changes for the alarm |
|
Evaluate all data |
Do not specify. |
|
Monitoring time range |
Always monitor |
|
Report alarm when the following damping condition is reached. |
Do not specify. |
|
occurrence(s) during |
0 |
|
interval(s) |
0 |
|
Alarm Conditions 1 |
Record |
Logical Disk Overview (PI_LOGD) |
Field |
ID |
|
Abnormal condition |
ID <> _Total#1 |
|
Warning condition |
ID <> _Total#1 |
|
Alarm Conditions 2 |
Record |
Logical Disk Overview (PI_LOGD) |
Field |
Free Mbytes |
|
Abnormal condition |
Free Mbytes < 5120#2 |
|
Warning condition |
Free Mbytes < 10240#2 |
|
Actions |
|
-- |
Command |
-- |
|
SNMP |
Abnormal, Warning, Normal |
- Legend:
-
--: Setting is always invalid.
- #1
-
Set the name of the logical disk volume to be monitored. The value used in the table shows an example of setting a condition value that satisfies the ID field.
- #2
-
Change the value as necessary for the environment.
Alarm table
PFM Windows Template Alarms [DSK] 09.00
Related reports
Reports/Windows/Operating System/Status Reporting/Real-Time/Free Megabytes - Logical Drive Status