Page Faults/sec
- Organization of this page
Overview
The Page Faults/sec alarm monitors the number of page faults that occurred per second. If the number of page faults continues to be at or above the threshold, memory might be a bottleneck.
Primary settings
PFM - Web Console alarm property |
Settings |
|
---|---|---|
Item |
Detailed item |
|
Main Information |
Product |
Windows |
Alarm message |
Page Faults = %CVS1 |
|
Enable alarm |
Selected |
|
Alarm notification |
Notify when the state changed |
|
Notification target |
State changes for the alarm |
|
Evaluate all data |
Do not specify. |
|
Monitoring time range |
Always monitor |
|
Report alarm when the following damping condition is reached. |
Selected |
|
occurrence(s) during |
2 |
|
interval(s) |
3 |
|
Alarm Conditions |
Record |
System Overview (PI) |
Field |
Page Faults/sec |
|
Abnormal condition |
Page Faults/sec >= 5# |
|
Warning condition |
Page Faults/sec >= 4# |
|
Actions |
|
-- |
Command |
-- |
|
SNMP |
Abnormal, Warning, Normal |
- Legend:
-
--: Setting is always invalid.
- #
-
Change the value as necessary for the environment.
Alarm table
PFM Windows Template Alarms [MEM] 09.00
Related reports
Reports/Windows/Operating System/Troubleshooting/Real-Time/System Overview