Service Stop(dsp nm)

Organization of this page

Overview
Main settings
Alarm table
Related reports

Overview

The Service Stop(dsp nm) alarm monitors the name (display name) used by the user interface program to identify a service and the service status at the time of data collection. If the application service (process) is not active (running), it means that the service has stopped.

To Page Top

Main settings

Table 6‒19: PFM - Web Console alarm property setting (Service Stop(dsp nm))
Alarm properties in PFM - Web Console		Setting
Item	Details	Setting
Main Information	Product	`RM Platform`
	Alarm message	`State of service(%CVS1) has changed`
	Enable alarm	Selected
	Alarm notification	Notify when the state changed
	Notification target	State changes for the alarm
	Evaluate all data	Do not specify.
	Monitoring time range	Always monitor
	Report alarm when the following damping condition is reached	Do not specify.
	occurrence(s) during	`0`
	interval(s)	`0`
Alarm Conditions	Record	`Application Service Overview (PD_ASVC)`
	Field	`Display Name` `State`
	Abnormal condition	`Display Name = PFM - RM Store for Platform RM^#` `AND State <> Running`
	Warning condition	`Display Name = PFM - RM Store for Platform RM^#` `AND State <> Running`
Actions	Email	--
	Command	--
	SNMP	Abnormal, Warning, Normal

Legend:: --: The setting is always ignored.

#

Specify the display name of the service to be monitored. The settings in the table give an example that sets the display name for a Remote Monitor Store service whose instance name is RM. Make sure that the character string you enter here matches what is entered in the Display Name field of the PD_ASVC record.

Any character in the information to be acquired that is not in the ASCII character set range of 0x20 to 0x7E will be converted to a hash mark (#: 0x23) before it is stored in the Display Name field of the PD_ASVC record. Note that multi-byte characters are processed in single-byte units during conversion. For example, the multi-byte (full-width) letter [Figure] is converted as follows:

Information to be acquired		Information after conversion
Character encoding	Binary	Binary	Character string
Shift-JIS	`8260`	`2360`	#`
EUC	`A3C1`	`2323`	`##`
UTF-8	`EFBCA1`	`232323`	`###`

To Page Top

Alarm table

PFM RM Platform Template Alarms [SVC] 09.10

To Page Top

Related reports

None.

Note: Do not use this alarm if the OS of the monitored host is UNIX.

To Page Top