F. Checking the Definition Information
Before importing definition information, the jpctool config mgrimport command checks whether the definition information specified by the -d option matches that stored in the import-source directory. If a discrepant item of definition information is found, a KAVE06142-E message is output to the standard error output and common message log. Note that the KAVE06142-E message is output as many times as the number of discrepant items of definition information.
The following table lists the definition information names that are displayed in the KAVE06142-E message and whether the information is set by editing a file or executing a command.
Definition information name |
Category |
File name or Command name (setup item name) |
Checking method |
---|---|---|---|
jpchosts |
File |
jpchosts (host information settings) |
Compare files.# |
jpcvsvr.ini, label=UserServer. authenticationMode |
jpcvsvr.ini (authentication mode settings) |
Compare the text strings of label settings. |
|
monitoringitems.cfg |
monitoringitems.cfg (Definition file for JP1/SLM-linkage custom monitoring items) |
Compare files.# |
|
Configure the health check function |
Command |
jpcconf hc (health check functionality settings) |
Compare the output returned by the jpcconf hc display command with the health check functionality settings. |
Configure the status management function |
jpcconf stat (status management functionality settings) |
Compare the output returned by the jpcconf stat display command with the status management functionality settings. |
|
Setting the product name display function |
jpcconf prodname (product name display functionality settings) |
Compare the output returned by the jpcconf prodname display command with the product name display functionality settings. |
|
Setting IPv6 addresses |
jpcconf ipv6 (IPv6 communication functionality settings) |
Compare the output returned by the jpcconf ipv6 display command with the IPv6 communication functionality settings. |
|
IM2 Linkage |
jpcconf im2 (JP1/IM2 linkage functionality settings) |
Compare the output returned by the jpcconf im2 display command with the JP1/IM2 linkage functionality settings. |
|
IM2 Linkage Notify State Change Event |
Compare the output returned by the jpcconf im2 display command with the function for batch-issuing events that change agent status settings. |
The tables below list the definition information names that might be output in the KAVE06142-E message if discrepant definition information is found and the corresponding items of which the settings must be checked. If discrepant definition information is found, check the definition information name in the KAVE06142-E message, correct the setting of the discrepant definition information, and then re-execute the jpctool config mgrimport command.
Definition information name |
Section name |
Label name |
---|---|---|
jpccomm.ini, section=Common Section, label=Multiple Alarm Table Bind |
Common Section |
Multiple Alarm Table Bind |
jpccomm.ini, section=Common Section, label=Alarm Message Mode |
Alarm Message Mode |
|
jpccomm.ini, section=Common Section, label=JP1 Event Double Quote |
JP1 Event Double Quote |
|
jpccomm.ini, section=Common Section, label=Correlator Startup Mode |
Correlator Startup Mode |
|
jpccomm.ini, section=Common Section, label=Retry Getting Alarm Status |
Retry Getting Alarm Status |
|
jpccomm.ini, section=Common Section, label=Business Group Monitor Mode |
Business Group Monitor Mode |
|
jpccomm.ini, section=Common Section, label=Agent Remote Protection |
Agent Remote Protection |
|
jpccomm.ini, section=Common Section, label=Service List Protection |
Service List Protection |
|
jpccomm.ini, section=Common Section, label=Prioritize Manager Startup |
Prioritize Manager Startup |
|
jpccomm.ini, section=Common Section, label=Multiple Manager |
Multiple Manager |
|
jpccomm.ini, section=Common Section, label=Remote Action Control |
Remote Action Control |
|
jpccomm.ini, section=Common Section, label=Alarm Command Wait Mode |
Alarm Command Wait Mode |
|
jpccomm.ini, section=Common Section, label=Alarm Command Timeout |
Alarm Command Timeout |
|
jpccomm.ini, section=Common Section, label=Historical Data Collection Priority Mode |
Historical Data Collection Priority Mode |
|
jpccomm.ini, section=Common Section, label=Random Retry Mode |
Random Retry Mode |
|
jpccomm.ini, section=Common Section, label=Monitoring Suspend Mode |
Monitoring Suspend Mode |
|
jpccomm.ini, section=Common Section, label=Auto Sync for Suspend Setting |
Auto Sync for Suspend Setting |
|
jpccomm.ini, section=Common Section, label=Auto Alarm Bind Mode |
Auto Alarm Bind Mode |
|
jpccomm.ini, section=Common Section, label=Suppress Action Execution |
Suppress Action Execution |
|
jpccomm.ini, section=Name Server Section, label=NS Connection Timeout |
Name Server Section |
NS Connection Timeout# |
jpccomm.ini, section=Name Server Section, label=NS Maximum Connections |
NS Maximum Connections |
|
jpccomm.ini, section=Name Server Section, label=NS Keepalive Mode |
NS Keepalive Mode |
|
jpccomm.ini, section=Master Manager Section, label=NS Connection Timeout |
Master Manager Section |
NS Connection Timeout# |
jpccomm.ini, section=Master Manager Section, label=NS Maximum Connections |
NS Maximum Connections |
|
jpccomm.ini, section=Master Manager Section, label=NS Keepalive Mode |
NS Keepalive Mode |
|
jpccomm.ini, section=Correlator Section, label=NS Connection Timeout |
Correlator Section |
NS Connection Timeout# |
jpccomm.ini, section=Correlator Section, label=NS Maximum Connections |
NS Maximum Connections |
|
jpccomm.ini, section=Correlator Section, label=NS Keepalive Mode |
NS Keepalive Mode |
|
jpccomm.ini, section=Tools Section, label=StartService Retry Interval |
Tools Section |
StartService Retry Interval |
jpccomm.ini, section=Tools Section, label=StartService Retry Count |
StartService Retry Count |
|
jpccomm.ini, section=Tools Section, label=NS Keepalive Mode |
NS Keepalive Mode |
|
jpccomm.ini, section=Master Store Section, label=NS Keepalive Mode |
Master Store Section |
NS Keepalive Mode |
jpccomm.ini, section=Action Handler Section, label=NS Keepalive Mode |
Action Handler Section |
NS Keepalive Mode |
jpccomm.ini, section=Action Handler Section, label=Action Execution Count Limitation |
Action Execution Count Limitation |
|
jpccomm.ini, section=Action Handler Section, label=Action Concurrent Execution Count |
Action Concurrent Execution Count |
|
jpccomm.ini, section=Action Handler Section, label=Action Execution Queue Count |
Action Execution Queue Count |
|
jpccomm.ini, section=Action Handler Section, label=Action Execution Time Limit |
Action Execution Time Limit |
|
jpccomm.ini, section=Trap Generator Section, label=NS Keepalive Mode |
Trap Generator Section |
NS Keepalive Mode |
jpccomm.ini, section=Status Server Section, label=NS Keepalive Mode |
Status Server Section |
NS Keepalive Mode |
jpccomm.ini, section=View Server Section, label=NS Keepalive Mode |
View Server Section |
NS Keepalive Mode |
jpccomm.ini, section=Agent Collector 0 Section, label=NS Keepalive Mode |
Agent Collector 0 Section |
NS Keepalive Mode |
jpccomm.ini, section=Agent Collector 0 Section, label=Historical Data Collection Priority Mode |
Historical Data Collection Priority Mode |
Definition information name |
Folder name |
Property name |
|
---|---|---|---|
HealthCheck, Property=JP1 Event Configurations->Agent Collector |
JP1 Event Configurations |
-- |
Agent Collector |
HealthCheck, Property=JP1 Event Configurations->Agent Store |
Agent Store |
||
HealthCheck, Property=Detail Records->PD->Log |
Detail Records |
PD |
Log |
HealthCheck, Property=Detail Records->PD->Collection Interval |
Collection Interval |
||
HealthCheck, Property=Detail Records->PD->Collection Offset |
Collection Offset |
||
HealthCheck, Property=Detail Records->PD->Realtime Report Data Collection Mode |
Realtime Report Data Collection Mode# |
||
HealthCheck, Property=Detail Records->PD->LOGIF |
LOGIF |
||
HealthCheck, Property=Detail Records->HC->Log |
HC |
Log |
|
HealthCheck, Property=Detail Records->HC->Collection Interval |
Collection Interval |
||
HealthCheck, Property=Detail Records->HC->Collection Offset |
Collection Offset |
||
HealthCheck, Property=Detail Records->HC->Realtime Report Data Collection Mode |
Realtime Report Data Collection Mode# |
||
HealthCheck, Property=Detail Records->HC->LOGIF |
LOGIF |
||
HealthCheck, Property=Detail Records->HOST->Log |
HOST |
Log |
|
HealthCheck, Property=Detail Records->HOST->Realtime Report Data Collection Mode |
Realtime Report Data Collection Mode# |
||
HealthCheck, Property=Detail Records->HOST->LOGIF |
LOGIF |
||
HealthCheck, Property=Interval Records->PI->Log |
Interval Records |
PI |
Log |
HealthCheck, Property=Interval Records->PI->Collection Interval |
Collection Interval |
||
HealthCheck, Property=Interval Records->PI->Collection Offset |
Collection Offset |
||
HealthCheck, Property=Interval Records->PI->Realtime Report Data Collection Mode |
Realtime Report Data Collection Mode# |
||
HealthCheck, Property=Interval Records->PI->LOGIF |
LOGIF |
||
HealthCheck, Property=Interval Records->SYS->Log |
SYS |
Log |
|
HealthCheck, Property=Interval Records->SYS->Realtime Report Data Collection Mode |
Realtime Report Data Collection Mode# |
||
HealthCheck, Property=Interval Records->SYS->LOGIF |
LOGIF |
||
HealthCheck, Property=Interval Records->HAVL->Log |
HAVL |
Log |
|
HealthCheck, Property=Interval Records->HAVL->Realtime Report Data Collection Mode |
Realtime Report Data Collection Mode# |
||
HealthCheck, Property=Interval Records->HAVL->LOGIF |
LOGIF |
||
HealthCheck, Property=Health Check Configurations->Monitoring Level |
Health Check Configurations |
-- |
Monitoring Level |
HealthCheck, Property=Health Check Configurations->Incl Action Handler |
Incl Action Handler |
||
HealthCheck, Property=Health Check Configurations->Busy as Inactive |
Busy as Inactive |
||
HealthCheck, Property=Health Check Configurations->Time to Busy as Inactive Collector |
Time to Busy as Inactive Collector |
||
HealthCheck, Property=Health Check Configurations->Time to Busy as Inactive Store |
Time to Busy as Inactive Store |
||
HealthCheck, Property=Health Check Configurations->Time to Busy as Inactive AH |
Time to Busy as Inactive AH |
||
HealthCheck, Property=Health Check Configurations->JP1 Event |
JP1 Event |
||
HealthCheck, Property=Health Check Configurations->JP1 Event - Send Host Mode |
JP1 Event - Send Host Mode |
||
HealthCheck, Property=Health Check Configurations->JP1 Event - Not Supported |
JP1 Event - Not Supported |
||
HealthCheck, Property=Health Check Configurations->JP1 Event - Running |
JP1 Event - Running |
||
HealthCheck, Property=Health Check Configurations->JP1 Event - Incomplete |
JP1 Event - Incomplete |
||
HealthCheck, Property=Health Check Configurations->JP1 Event - Stopped |
JP1 Event - Stopped |
||
HealthCheck, Property=Health Check Configurations->JP1 Event - Unconfirmed |
JP1 Event - Unconfirmed |
||
HealthCheck, Property=Health Check Configurations->JP1 Event - Host Not Available |
JP1 Event - Host Not Available |
||
HealthCheck, Property=Health Check Configurations->Parallel Confirmation Mode |
Parallel Confirmation Mode |
||
HealthCheck, Property=Health Check Configurations->Parallel Confirmation Count |
Parallel Confirmation Count |
||
HealthCheck, Property=Health Check Configurations->Minimum Period Per Host |
Minimum Period Per Host |
||
HealthCheck, Property=Health Check Configurations->Timeout Period Per Host |
Timeout Period Per Host |
Definition information name (string displayed in the message) |
Folder name |
Property name |
|
---|---|---|---|
HealthCheck(Store), Property=RetentionEx->Product Interval - PI->Period - Minute Drawer (Day) |
RetentionEx |
Product Interval - PI |
Period - Minute Drawer (Day) |
HealthCheck(Store), Property=RetentionEx->Product Interval - PI->Period - Hour Drawer (Day) |
Period - Hour Drawer (Day) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - PI->Period - Day Drawer (Week) |
Period - Day Drawer (Week) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - PI->Period - Week Drawer (Week) |
Period - Week Drawer (Week) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - PI->Period - Month Drawer (Month) |
Period - Month Drawer (Month) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - PI->Period - Year Drawer (Year) |
Period - Year Drawer (Year) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - SYS->Period - Minute Drawer (Day) |
Product Interval - SYS |
Period - Minute Drawer (Day) |
|
HealthCheck(Store), Property=RetentionEx->Product Interval - SYS->Period - Hour Drawer (Day) |
Period - Hour Drawer (Day) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - SYS->Period - Day Drawer (Week) |
Period - Day Drawer (Week) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - SYS->Period - Week Drawer (Week) |
Period - Week Drawer (Week) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - SYS->Period - Month Drawer (Month) |
Period - Month Drawer (Month) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - SYS->Period - Year Drawer (Year) |
Period - Year Drawer (Year) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - HAVL->Period - Minute Drawer (Day) |
Product Interval - HAVL |
Period - Minute Drawer (Day) |
|
HealthCheck(Store), Property=RetentionEx->Product Interval - HAVL->Period - Hour Drawer (Day) |
Period - Hour Drawer (Day) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - HAVL->Period - Day Drawer (Week) |
Period - Day Drawer (Week) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - HAVL->Period - Week Drawer (Week) |
Period - Week Drawer (Week) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - HAVL->Period - Month Drawer (Month) |
Period - Month Drawer (Month) |
||
HealthCheck(Store), Property=RetentionEx->Product Interval - HAVL->Period - Year Drawer (Year) |
Period - Year Drawer (Year) |
||
HealthCheck(Store), Property=RetentionEx->Product Detail - PD->Period (Day) |
Product Detail - PD |
Period (Day) |
|
HealthCheck(Store), Property=RetentionEx->Product Detail - HC->Period (Day) |
Product Detail - HC |
Period (Day) |
|
HealthCheck(Store), Property=RetentionEx->Product Detail - HOST->Period (Day) |
Product Detail - HOST |
Period (Day) |
|
Master Manager, Property=JP1 Event Configurations->Name Server |
JP1 Event Configurations |
-- |
Name Server |
Master Manager, Property=JP1 Event Configurations->Master Manager |
Master Manager |
||
Master Manager, Property=JP1 Event Configurations->Master Store |
Master Store |
||
Master Manager, Property=JP1 Event Configurations->Correlator |
Correlator |
||
Master Manager, Property=JP1 Event Configurations->Trap Generator |
Trap Generator |
||
Master Manager, Property=JP1 Event Configurations->View Server |
View Server |
||
Master Manager, Property=JP1 Event Configurations->Action Handler |
Action Handler |
||
Master Manager, Property=JP1 Event Configurations->Status Server |
Status Server |
||
Master Manager, Property=JP1 Event Configurations->JP1 Event Send Host |
JP1 Event Send Host |
||
Master Manager, Property=JP1 Event Configurations->Monitoring Console Host |
Monitoring Console Host |
||
Master Manager, Property=JP1 Event Configurations->Monitoring Console Port |
Monitoring Console Port |
||
Master Manager, Property=JP1 Event Configurations->Alarm->JP1 Event Mode |
Alarm |
JP1 Event Mode |
|
Master Manager, Property=JP1 Event Configurations->System->Monitoring Suspend |
System |
Monitoring Suspend |
|
Master Manager, Property=ITSLM Coordination Configuration->ITSLM Coordination->ITSLM Host |
ITSLM Coordination Configuration |
ITSLM Coordination |
ITSLM Host |