E. Correspondence Between New Commands and Old Commands

The following table shows the correspondence between commands for version 09-00 or later and commands for version 08-11 or earlier for use on PFM - Manager, PFM - Agent, PFM - Base, and PFM - Web Console. You can still use the old commands on version 09-00 or later of PFM - Manager, PFM - Agent, PFM - Base, and PFM - Web Console.

Table E‒1: New commands and old commands of Performance Management (PFM - Manager, PFM - Agent, PFM - Base, and PFM - Web Console)
Old command name	New command name	Function
`jpcagtsetup`	`jpcconf agent setup`	Executes additional setup of a new PFM - Agent or PFM - RM.^#1
`jpcalarm active`	`jpctool alarm active`	Enables a disabled alarm.
`jpcalarm bind`	`jpctool alarm bind`	Binds an alarm table to an agent.
`jpcalarm check`	`jpctool alarm check`	Checks the validity of the syntax and definitions in the alarm definition file.
`jpcalarm copy`	`jpctool alarm copy`	Copies an alarm table or alarm.
`jpcalarm delete`	`jpctool alarm delete`	Deletes an alarm table or alarm.
`jpcalarm export`	`jpctool alarm export`	Exports an alarm definition file.
`jpcalarm import`	`jpctool alarm import`	Imports an alarm definition file.
`jpcalarm inactive`	`jpctool alarm inactive`	Disables an enabled alarm.
`jpcalarm list`	`jpctool alarm list`	Displays alarm table definition information.
`jpcalarm unbind`	`jpctool alarm unbind`	Unbinds an alarm table.
`jpcaspsv output`	No change	Outputs definition information for the Store database storage conditions.
`jpcaspsv update`	No change	Changes definition information for the Store database storage conditions.
`jpcasrec output`	No change	Outputs definition information for the Store database recording method.
`jpcasrec update`	No change	Changes definition information for the Store database recording method.
`jpcctrl backup`	`jpctool db backup`	Creates a backup file for the data stored in the Master Store, Agent Store, or Remote Monitor Store service database.^#1
`jpcctrl clear`	`jpctool db clear`	Erases the data stored in the Master Store, Agent Store, or Remote Monitor Store service database.^#1
`jpcctrl delete`	`jpctool service delete`	Deletes the service information for an agent registered in Performance Management.^#1
`jpcctrl dump`	`jpctool db dump`	Exports data from the Master Store, Agent Store, or Remote Monitor Store service database to a text file.^#1
`jpcctrl list`	`jpctool service list`	Displays the service configuration and status of a Performance Management program.^#1
`jpcdbctrl config`	`jpcconf db define`	Changes and displays the settings of the Store service.
`jpcdbctrl display`	`jpcconf db display`	Displays information about the Store service or the backup data. Checks the version of Store (1.0 or 2.0).
`jpcdbctrl dmconvert`	`jpctool db dmconvert`	Converts the data model of the backup data.
`jpcdbctrl import`	`jpctool db import`	Imports backup data to the Store database.
`jpcdbctrl setup`	`jpcconf db vrset`^#2	Sets up the functions of Store 2.0 (for the Agent Store and Remote Monitor Store services).
`jpcdbctrl unsetup`	`jpcconf db vrset`^#2	Restores the Store version to 1.0 from 2.0.
`jpchasetup create`	`jpcconf ha setup`	Creates a logical host environment for a Performance Management program.^#1
`jpchasetup delete`	`jpcconf ha unsetup`	Deletes a logical host environment for a Performance Management program.^#1
`jpchasetup export`	`jpcconf ha export`	Exports the logical host environment settings for a Performance Management program, to a file.^#1
`jpchasetup import`	`jpcconf ha import`	Imports a logical host environment information file for a Performance Management program, to the standby node.^#1
`jpchasetup list`	`jpcconf ha list`	Displays logical host environment settings for a Performance Management program.^#1
`jpcimevt`	No change	Registers a JP1 event in the event server and sends the registered event to JP1/IM.
`jpcimsetup`^#3	`jpcconf im enable`	Enables the JP1/IM monitored object linkage function.^#1
`jpcimsetup`^#3	`jpcconf im disable`	Disables the JP1/IM monitored object linkage function.^#1
`jpcinslist`	`jpcconf inst list`	Displays the names of instances set up by a PFM - Agent or PFM - RM that can start a set of multiple services on a single host.^#1
`jpcinssetup`	`jpcconf inst setup`	Creates or updates an instance environment for a PFM - Agent or PFM - RM that can start a set of multiple services on a single host.^#1
`jpcinsunsetup`	`jpcconf inst unsetup`	Deletes an instance environment for a PFM - Agent or PFM - RM that can start a set of multiple services on a single host.^#1
`jpcmkkey`	No change	Creates an authentication key file required for command execution in PFM - Web Console.
`jpcnsconfig port^#`³	`jpcconf port list`	Displays port numbers used with Performance Management.^#1
`jpcnsconfig port^#`³	`jpcconf port define`	Sets port numbers used with Performance Management.^#1
`jpcnshostname^#`³	`jpcconf mgrhost define`	Sets or changes the host name of PFM - Manager for the connection destination (Name Server service).^#1
`jpcnshostname^#`³	`jpcconf mgrhost display`	Displays the host name of PFM - Manager for the connection destination (Name Server service).^#1
`jpcovunsetup`	`jpcconf ov disable`	Performs an unsetup of the NNM linkage facility.^#4
`jpcras`	No change	Collects information about PFM - Manager, PFM - Agent, PFM - RM, or PFM - Base, as well as OS information.^#1
`jpcrdef create`	No change	Registers new report definitions.
`jpcrdef delete`	No change	Deletes existing report definitions.
`jpcrdef output`	No change	Outputs existing report definitions.
`jpcresto`	`jpctool db restore`	Restores the Master Store, Agent Store, or Remote Monitor Store service database that was backed up by the `jpctool db backup` command.^#1
`jpcrpt`	No change	Outputs a report displayed on PFM - Web Console to a batch report in the CSV format or HTML format.
`jpcstart`	`jpcspm start`	Starts the service of a Performance Management program at the local host.^#1
`jpcstop`	`jpcspm stop`	Stops the service of a Performance Management program at the local host.^#1
`jpcstsetup disable`	`jpcconf stat disable`	Disables the status management function.
`jpcstsetup display`	`jpcconf stat display`	Displays the status of the status management function.
`jpcstsetup enable`	`jpcconf stat enable`	Enables the status management function.
`jpcstsetup hcdisable`	`jpcconf hc disable`	Disables the health check function.
`jpcstsetup hcdisplay`	`jpcconf hc display`	Displays the status of the health check function.
`jpcstsetup hcenable`	`jpcconf hc enable`	Enables the health check function.
`jpcwagtsetup`	No change	Registers a new PFM - Agent or PFM - RM in PFM - Web Console.
`jpcwras`	No change	Collects PFM - Web Console information.
`jpcwstart`	No change	Starts the PFM - Web Console service.
`jpcwstop`	No change	Stops the PFM - Web Console service.

#1

If this command's execution is interrupted by pressing the Ctrl + C keys or by a signal, a predefined return value is not returned. Therefore, you should ignore the return value when the command was interrupted by the Ctrl + C keys or by a signal.

#2

These commands were integrated into a single new command.

#3

These commands were split into several new commands.

#4

These commands are stored in the following directory:

In Windows: installation-folder\NNMEx\

In UNIX: /opt/jp1pc/NNMEx/

To Page Top