14.2.2 Messages output by JP1/Service Support databases to the event log

KFPS01850-I

30000

Information

The Item management database has stopped.

--

KFPS05210-I

30000

Information

The Item management database has started.

Immediately after the JP1/Service Support - DB Server service has started, startup of the Item management database is not complete yet. Therefore, check whether this message is output to determine whether the startup is complete.

KFPH00211-I

30000

Information

Free space on the Item management database has become scarce. This message is output when the percentage of space used compared to the total capacity of the Item management database reaches 80%, 90%, and 100%.

If the Item storage database is not used:

Delete unnecessary data and then perform the following:

1. Execute the jssdelrec command to delete any data that is waiting to be deleted.

2. Execute the jssdbrorg.bat command to reorganize the free space of the Item management database.

If the same message appears again, use the following procedure to increase the size of the Item management database:

1. Use the jssdbbackup.bat command to back up the Item management database (for extension).

2. Use the jsssetup.bat command to increase the size of the Item management database.

3. Use the jssdbrecovery.bat command to recover the data from the backup created in step 1.

If the Item storage database is used:

The capacity of the Item management database or Item storage database is insufficient. Execute the jssdbstatchk.bat command to check the usage of the Item management database and Item storage database.

If the capacity of the Item management database is insufficient, delete unnecessary data or store Items as described below.

• When deleting unnecessary data:

1. Delete unnecessary data.

2. Execute the jssdelrec command to delete any data that is waiting to be deleted.

3. Execute the jssdbrorg.bat command to reorganize the free space of the Item management database.

• When storing Items:

1. Execute the jssitemstore command to store closed old Items in the Item storage database.

2. Execute the jssdbrorg.bat command to reorganize the free space of the Item management database.

If the capacity of the Item storage database is insufficient, expand the Item storage database or rotate the storage areas according to the predefined operation of the Item storage database. For details about the procedures, see 11.2.11 Rotating the storage locations in the Item storage database and 11.2.12 Expanding the Item storage database.

KFPH00212-I

30000

Information

Reorganization of the database is required.

KFPH00213-W

30001

Warning

The capacity of the database is insufficient. This message is output when there is no more free space in the database.