Hitachi

JP1 Version 12 JP1/Service Support Configuration and Administration Guide


Item accumulation property file (hptl_jp1_imss_main_setting_kpi.properties)

Organization of this page

Description

This file defines the threshold values for displaying accumulation results for Items in the main window (Item status). It also defines the contents to be displayed in the list of target Items.

The following information is defined. Edit it as required for operation.

You can set the threshold value for displaying an Item with a warning in the main window (Item status) from the New process work board window or the Edit the process work board window.

Format

hptl_jp1_imss_kpi_term_incident=Unsolved period treated as extended (Incident management)
hptl_jp1_imss_kpi_term_problem=Unsolved period treated as extended (Problem management)
hptl_jp1_imss_kpi_term_change=Unsolved period treated as extended (Change management)
hptl_jp1_imss_kpi_term_release=Unsolved period treated as extended (Release management)
   :
hptl_jp1_imss_kpi_system_default_list=Type of Items to be displayed in the list of target Items when you select a system
hptl_jp1_imss_kpi_process_default_list=Type of Items to be displayed in the list of target Items when you select a process

Lines starting with a hash mark (#) are treated as comments.

File names

Storage folder

JP1/SS-path\conf\

When the definition is applied

The definition is applied when you execute the jsscollectdata command.

In addition, the definition is applied to the main window (Item status) after the following services are restarted:

What is described

Do not edit any specification keys other than those that are explained in the following table. Use an equal sign (=) to connect a specification key and its value.

Table 13‒16: List of specification keys that can be set in the Item accumulation property file

Specification key name

Description

Default value

hptl_jp1_imss_kpi_term_incident

Specifies the unsolved period to be treated as extended by incident management (in hours).

You can specify a numeric character (integer) from 0 to 876000. Use only half-width numeric characters.

72

hptl_jp1_imss_kpi_term_problem

Specifies the unsolved period to be treated as extended by problem management (in hours).

You can specify a numeric character (integer) from 0 to 876000. Use only half-width numeric characters.

168

hptl_jp1_imss_kpi_term_change

Specifies the unsolved period to be treated as extended by change management (in hours).

You can specify a numeric character (integer) from 0 to 876000. Use only half-width numeric characters.

480

hptl_jp1_imss_kpi_term_release

Specifies the unsolved period to be treated as extended by release management (in hours).

You can specify a numeric character (integer) from 0 to 876000. Use only half-width numeric characters.

480

hptl_jp1_imss_kpi_term_for_XXX

Specifies the unsolved period when the unsolved period treated as extended is changed in a specific process work board (in hours).

You can specify this specification key more than once.

By default, this key is commented out (preceded by a hash mark (#)). Therefore, if you want to set this key, remove the comment, or add this key to specify the following setting:

  • For XXX of the specification key name, specify the ID of the process work board for which you want to change the unsolved period.

  • Specify the value.

This specification key has precedence over the specifications of other processes. But, if you specify an invalid process work board ID or an invalid value (values that are not described below), the values you specified for the individual processes are applied.

You can specify a numeric character (integer) from 0 to 876000. Use only half-width numeric characters.

--

hptl_jp1_imss_kpi_unprocessed_incident

Uses the number of Items to specify the threshold value for displaying a pending Item with a warning by incident management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_unprocessed_problem

Uses the number of Items to specify the threshold value for displaying a pending Item with a warning by problem management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_unprocessed_change

Uses the number of Items to specify the threshold value for displaying a pending Item with a warning by change management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half width numeric characters.

10

hptl_jp1_imss_kpi_unprocessed_release

Uses the number of Items to specify the threshold value for displaying a pending Item with a warning by release management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_unprocessed_for_XXX

Uses the number of Items to specify the threshold value when you change the threshold value for displaying a pending Item with a warning by a specific process work board.

You can specify this specification key more than once.

By default, this key is commented out (preceded by a hash mark (#)). Therefore, if you want to set this key, remove the comment, or add this key to specify the following setting:

  • For XXX of the specification key name, specify the ID of the process work board for which you want to change the threshold value.

  • Specify the value.

This specification key has precedence over the specifications of other processes. But, if you specify an invalid process work board ID or an invalid value (values that are not described below), the values you specified for the individual processes are applied.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

--

hptl_jp1_imss_kpi_processing_incident

Uses the number of Items to specify the threshold value for displaying an uncompleted Item with a warning by incident management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

30

hptl_jp1_imss_kpi_processing_problem

Uses the number of Items to specify the threshold value for displaying an uncompleted Item with a warning by problem management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

30

hptl_jp1_imss_kpi_processing_change

Uses the number of Items to specify the threshold value for displaying an uncompleted Item with a warning by change management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

30

hptl_jp1_imss_kpi_processing_release

Uses the number of Items to specify the threshold value for displaying an uncompleted Item with a warning by release management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

30

hptl_jp1_imss_kpi_processing_for_XXX

Uses the number of Items to specify the threshold value for displaying an uncompleted Item with a warning by a specific process work board.

You can specify this specification key more than once.

By default, this key is commented out (preceded by a hash mark (#)). Therefore, if you want to set this key, remove the comment, or add this key to specify the following setting:

  • For XXX of the specification key name, specify the ID of the process work board for which you want to change the threshold value.

  • Specify the value.

This specification key has precedence over the specifications of other processes. But, if you specify an invalid process work board ID or an invalid value (values that are not described below), the values you specified for the individual processes are applied.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

--

hptl_jp1_imss_kpi_judging_incident

Uses the number of Items to specify the threshold value for displaying a discussing Item with a warning by incident management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_judging_problem

Uses the number of Items to specify the threshold value for displaying a discussing Item with a warning by problem management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_judging_change

Uses the number of Items to specify the threshold value for displaying a discussing Item with a warning by change management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_judging_release

Uses the number of Items to specify the threshold value for displaying a discussing Item with a warning by release management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_judging_for_XXX

Uses the number of Items to change the threshold value for displaying a discussing Item with a warning by a specific process work board.

You can specify this specification key more than once.

By default, this key is commented out (preceded by a hash mark (#)). Therefore, if you want to set this key, remove the comment, or add this key to specify the following setting:

  • For XXX of the specification key name, specify the ID of the process work board for which you want to change the threshold value.

  • Specify the value.

This specification key has precedence over the specifications of other processes. But, if you specify an invalid process work board ID or an invalid value (values that are not described below), the values you specified for the individual processes are applied.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

--

hptl_jp1_imss_kpi_longterm_incident

Uses the number of Items to specify the threshold value for displaying an extended Item with a warning by incident management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_longterm_problem

Uses the number of Items to specify the threshold value for displaying an extended Item with a warning by problem management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_longterm_change

Uses the number of Items to specify the threshold value for displaying an extended Item with a warning by change management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_longterm_release

Uses the number of Items to specify the threshold value for displaying an extended Item with a warning by release management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_longterm_for_XXX

Uses the number of Items to specify the threshold value when you change the threshold value for displaying an extended Item with a warning by a specific process work board.

You can specify this specification key more than once.

By default, this key is commented out (preceded by a hash mark (#)). Therefore, if you want to set this key, remove the comment, or add this key to specify the following setting:

  • For XXX of the specification key name, specify the ID of the process work board for which you want to change the threshold value.

  • Specify the value.

This specification key has precedence over the specifications of other processes. But, if you specify an invalid process work board ID or an invalid value (values that are not described below), the values you specified for the individual processes are applied.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

--

hptl_jp1_imss_kpi_priority_incident

Uses the number of Items to specify the threshold value for displaying a top priority Item with a warning by incident management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_priority_problem

Uses the number of Items to specify the threshold value for displaying a top priority Item with a warning by problem management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_priority_change

Uses the number of Items to specify the threshold value for displaying a top priority Item with a warning by change management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_priority_release

Uses the number of Items to specify the threshold value for displaying a top priority Item with a warning by release management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_priority_for_XXX

Uses the number of Items to specify the threshold value when you change the threshold value for displaying a top priority Item with a warning by a specific process work board.

You can specify this specification key more than once.

By default, this key is commented out (preceded by a hash mark (#)). Therefore, if you want to set this key, remove the comment, or add this key to specify the following setting:

  • For XXX of the specification key name, specify the ID of the process work board for which you want to change the threshold value.

  • Specify the value.

This specification key has precedence over the specifications of other processes. But, if you specify an invalid process work board ID or an invalid value (values that are not described below), the values you specified for the individual processes are applied.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

--

hptl_jp1_imss_kpi_today_incident

Uses the number of Items to specify the threshold value for displaying a today's deadline Item with a warning by incident management.

You can specify a numeric character (integer) from 0 to 2147483647.Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_today_problem

Uses the number of Items to specify the threshold value for displaying a today's deadline Item with a warning by problem management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_today_change

Uses the number of Items to specify the threshold value for displaying a today's deadline Item with a warning by change management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_today_release

Uses the number of Items to specify the threshold for displaying today's deadline Item with a warning by release management.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

10

hptl_jp1_imss_kpi_today_for_XXX

Uses the number of Items to specify the threshold value when you change the threshold value for displaying a today's deadline Item with a warning by a specific process work board.

You can specify this specification key more than once.

By default, this key is commented out (preceded by a hash mark (#)). Therefore, if you want to set this key, remove the comment, or add this key to specify the following setting:

  • For XXX of the specification key name, specify the ID of the process work board for which you want to change the threshold value.

  • Specify the value.

This specification key has precedence over the specifications of other processes. But, if you specify an invalid process work board ID or an invalid value (values that are not described below), the values you specified for the individual processes are applied.

You can specify a numeric character (integer) from 0 to 2147483647. Use only half-width numeric characters.

--

hptl_jp1_imss_kpi_system_default_list

Specifies the type of Items to be displayed in the list of target Items when you display the Item status from the system perspective in Check status of the main window (Item status). Note that the Items of the target system that is displayed at the top in Check status are displayed.

The following are specifiable values:

  • process: Uncompleted

  • long: Extended

  • priority: Top priority

priority

hptl_jp1_imss_kpi_process_default_list

Specifies the type of Items to be displayed in the list of target Items when you display Item status from the process perspective in Check status of the main window (Item status). Note that the Items subject to incident management are displayed.

The following are specifiable values:

  • process: Uncompleted

  • unprocess: Pending

  • judging: Discussing

  • long: Extended

  • priority: Top priority

  • today: Today's deadline

priority

Legend:

--: No default value

Note